Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade DynaCut Extreme sanding disc uses premium P graded aluminum oxide abrasives on a film backing to deliver fast cut and long life, which helps installers remove material efficiently while keeping disc changes down during a job. The 5 inch diameter disc size matches common random-orbit sanders used in shops and on site, so the disc fits into existing workflows for cabinetry and woodworking. A 150 grit rating provides a fine sanding step that prepares surfaces between coats or after coarser grits, helping produce smooth finishes with less rework. The disc uses a hook and loop attachment system that allows quick disc swaps on the sander, reducing downtime between grit changes or when changing worn discs. Because discs can be saved for future use when not completely worn, shops can rotate partially used discs by grit, improving abrasive usage and lowering overall consumable waste.
This hook and loop 25-hole sanding disc uses a hook and loop attachment system as its mounting interface, so it mates directly to hook-faced backing pads on compatible sanders for a secure but removable hold. The 5 inch size and vacuum hole pattern work with pads designed for multi-hole dust extraction, allowing dust to be routed toward center extraction holes where vacuum draw is strongest. Because the film backing is extremely tough and tear resistant, the disc sits flat on the pad during use, supporting even contact and helping avoid edge fraying when working near corners or profiles. When sanding passes are complete for a given grit, the disc can be peeled from the pad and stored for later use if not completely worn, keeping partially used grits available for touchups or small follow-up jobs.
This aluminum oxide film sanding disc sits in the abrasives category as an abrasive disc designed for powered sanding. Its 150 grit construction supports fine sanding steps on wood or similar surfaces where a smoother finish is needed after heavier stock removal, so it suits intermediate and finish sanding operations in a typical sequence. The premium P graded aluminum oxide abrasives are manufactured for fast cut and long life, which supports production environments where large panel runs or repeated parts must be sanded with consistent results. The 5 inch diameter works with common random-orbit sanders found in cabinetry, furniture, and general woodworking shops, allowing crews to use familiar tools while stepping into a higher performing abrasive disc. Because the 3 mil film backing is extremely tough and tear resistant, it tolerates edge work and repeated passes over profiles where conventional paper discs may fail earlier.
The high performance 3 mil film backing generates the finest finishes by holding the P graded aluminum oxide grains in a stable, flat plane, which helps the disc cut evenly and leave a more uniform scratch pattern that reduces follow-up sanding. Its tear resistant nature keeps the disc intact under higher pressure or aggressive random-orbit motion, which matters when operators need to lean into localized high spots without losing the disc to edge rips. The proprietary clog free coating is pigment free and provides a buildup resistant abrasive surface, so dust and resin are less likely to load the face, keeping the disc cutting closer to its fresh performance over more passes. This reduces the number of disc changes on resinous or dust-heavy materials. The "Extreme" vacuum hole pattern channels sanding dust and sanding debris toward center extraction holes where vacuum draw is the greatest, which improves dust evacuation at the point of contact and supports cleaner working surfaces and clearer sight lines. With the hook and loop attachment system making disc changes quick and easy, operators can respond immediately when a grit step is complete or when a disc reaches the end of its useful life, keeping the sanding sequence predictable and aligned to finishing requirements.
The Dynabrade DynaCut Extreme 91539 sanding disc is 5 inches in diameter, which matches common random-orbit sanders used for cabinetry and woodworking tasks.
The disc is 150 grit, providing a fine sanding step that refines surfaces after coarser grits and helps prepare workpieces for finishing or between-coat sanding.
The hook and loop attachment system lets the disc attach and release quickly from hook-faced pads, so operators can change grits or swap discs without tools during a sanding sequence.
The high performance 3 mil film backing is extremely tough and tear resistant, so it supports flat contact, reduces edge tearing, and helps generate the finest finishes in use.
The "Extreme" vacuum hole pattern directs sanding dust and sanding debris to center extraction holes where vacuum draw is the greatest, so dust removal at the surface is improved.
The proprietary clog free, pigment free coating provides a buildup resistant abrasive surface, so dust and debris shed more easily and disc cutting performance is maintained longer.
The Dynabrade DynaCut Extreme sanding disc combines premium P graded aluminum oxide grains, a high performance 3 mil film backing, and a proprietary clog free coating to support fast cutting, long life sanding work. Its 5 inch, 150 grit hook and loop format with an "Extreme" vacuum hole pattern fits common random-orbit sanding workflows while directing debris toward center extraction holes where vacuum draw is strongest. For shops and installers needing consistent fine sanding with fewer disc changes, this abrasive disc offers a focused, production-oriented option for daily use.
Sold In: 1 Package