Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade DynaCut Extreme 5 inch sanding disc uses premium P graded aluminum oxide abrasives to cut fast while maintaining control, which helps level surfaces efficiently during fine sanding and reduces time spent on each pass. The disc is 1200 grit, so it refines surfaces to a very fine finish, which is important when preparing workpieces for high-end coatings or between-coat sanding. The abrasive is bonded to a high performance 3 mil film backing that is extremely tough and tear resistant, so the disc stays intact around edges and contours instead of shredding. This 5 inch disc is built as a coated abrasive on film, which provides a consistent scratch pattern that supports predictable finishing results across multiple panels.
The hook and loop attachment system on this 5 inch disc lets users install or remove the disc from a compatible backing pad quickly, which streamlines grit changes during multi-step sanding sequences. Because discs can be saved for future use when not completely worn, a partially used 1200 grit disc can be removed, stored, and later reinstalled without damaging the backing, supporting efficient use of the abrasive. The 25-hole vacuum layout is integrated into the disc, so when paired with a matching vacuum sander, dust is drawn through the pattern toward the center extraction holes, helping maintain a clearer surface during installation and use.
This Dynabrade DynaCut Extreme disc is built as a coated abrasive manufactured with premium P graded aluminum oxide abrasives, so the grain size and distribution support fast cut while still delivering a refined scratch pattern. At 1200 grit, the abrasive sequence targets fine finishing or between-coat sanding where surface uniformity has a direct impact on final appearance. The extremely tough and tear resistant high performance 3 mil film backing holds the abrasive stable across flat areas and edges, so the disc stays intact even when working near sharp corners or profiles. Because the film backing generates the finest finishes and delivers up to 4X the life of paper discs, one disc can often stay on the tool through more work, which is valuable when running repetitive sanding tasks on multiple parts.
The Extreme vacuum hole pattern on this 5 inch disc directs sanding dust and sanding debris to center extraction holes where vacuum draw is the greatest, so dust is pulled effectively from the sanding interface and away from the operator. This pattern supports more aggressive dust extraction at the central region of the pad, helping keep both the abrasive and work surface clearer during extended passes. A proprietary clog free coating is pigment free and provides a buildup resistant abrasive surface, so dust is less likely to bond to the grain, which helps the disc maintain its cut rate deeper into its service life. Because the disc uses a hook and loop attachment system, installers can move quickly between grits while keeping partially used discs available for later stages, which supports a repeatable workflow when moving from leveling to fine finishing on the same tool.
The Dynabrade DynaCut Extreme 91608 disc uses premium P graded aluminum oxide abrasives on a film backing, which supports fast cutting with a controlled, consistent scratch pattern for finishing work.
The 3 mil film backing is extremely tough and tear resistant, so it generates fine finishes and provides up to 4X the life of paper discs in normal sanding operations.
The Extreme vacuum hole pattern directs sanding dust and debris to center extraction holes where vacuum draw is greatest, improving dust capture and keeping the abrasive surface cleaner during use.
The proprietary clog free coating is pigment free and provides a buildup resistant abrasive surface, so sanding dust sheds more easily, helping the disc maintain cutting efficiency longer.
This Dynabrade sanding disc uses a hook and loop attachment system, which allows fast disc changes and enables partially used discs to be removed and reused later.
The 1200 grit aluminum oxide abrasive produces a very fine finish that is suited to detail sanding or surface refinement where a smooth substrate is important before subsequent steps.
This Dynabrade DynaCut Extreme 5 inch 1200 grit hook and loop disc combines premium P graded aluminum oxide, a tough 3 mil film backing, and an Extreme vacuum hole pattern to support fine finishing with efficient dust control. The proprietary clog free, pigment free coating keeps the abrasive surface buildup resistant, so cutting performance stays more consistent across the disc life. For woodworking professionals using Wurth Baer Supply as a source for abrasives, this film-backed 1200 grit disc provides a focused option when a refined finish and extended disc life are both priorities on the same sander.
Sold In: 1 Package