Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Dynabrade DynaCut Extreme 6 inch sanding disc is a 60 grit hook and loop no hole aluminum oxide on film sanding disc designed for fast cut and long life. The premium P graded aluminum oxide abrasive cuts aggressively while keeping the scratch pattern consistent, which helps installers reach target surface prep faster with fewer disc changes. The 6 inch diameter fits common hook and loop backup pads, so crews can standardize on one size across multiple tools. With a 60 grit rating, this disc is geared toward stock removal and leveling, giving a strong bite on surfaces before moving to finer steps, which streamlines sanding sequences on the job.
The hook and loop attachment system on this 6 inch 60 grit hook and loop sanding disc simplifies the sanding workflow by letting the disc engage the pad with a firm press. This quick connect interface means operators can move from aggressive cutting to intermediate steps without interrupting tool setup, which helps on multi-stage sanding sequences. Because the disc can be removed without damage when still usable, partially worn discs can be set aside and later reapplied for matching follow-up work, which supports consistent finishes across multiple surfaces on the same project.
This Dynabrade aluminum oxide film sanding disc pairs a 6 inch no hole layout with coated abrasives manufactured using premium P graded aluminum oxide, which suits continuous sanding on flat or contoured surfaces without worrying about aligning vent patterns. The 3 mil film backing is extremely tough and tear resistant, so the disc holds together around edges and corners where paper products tend to fail, keeping the abrasive face stable over more passes. With the proprietary clog free coating that is pigment free, the abrasive surface resists buildup, so sanding dust does not load into the grain as quickly, which is especially helpful across broader panels or repeated passes on similar parts.
The 60 grit rating positions this disc for front-end stock removal, leveling seams, and knocking down high spots, and the fast cut from the P graded aluminum oxide abrasives supports that role by removing material quickly while still preparing the surface for the next grit. Because the 3 mil film backing generates the finest finishes for this grit range and can give up to 4X the life of paper discs, crews can run longer between disc changes, which reduces interruptions and helps keep machine operators focused on part flow rather than abrasive maintenance.
The extremely tough and tear resistant high performance 3 mil film backing stabilizes the abrasive grain under pressure, which lets operators lean into aggressive areas without the disc breaking down prematurely, so more of the abrasive face is used productively. By generating the finest finishes for its grit class, this backing supports clean transitions when stepping from 60 grit to finer discs, reducing the number of intermediate grits needed to remove scratch patterns.
The proprietary clog free coating creates a buildup resistant surface that stays open longer, so dust and resin tend to shed off rather than packing into the grain, which keeps the cutting edges exposed for more of the disc life. Because this coating is pigment free, it avoids adding color to the work surface from the disc, supporting clean sanding on lighter materials where color transfer would be a concern. Combined with the hook and loop attachment system that enables quick and easy disc changes and allows saving partially used discs for future use, these features give shops better control over abrasive consumption and sanding sequence timing.
This Dynabrade DynaCut Extreme disc uses premium P graded aluminum oxide abrasives, which provide a fast cut and long life so operators can remove material quickly while keeping disc usage efficient.
The high performance 3 mil film backing is extremely tough and tear resistant, generating the finest finishes for this grit range and providing up to 4X the life of paper discs under typical sanding loads.
The Dynabrade 91571 disc is a 6 inch 60 grit sanding disc, which supports aggressive stock removal and leveling on larger surfaces before moving to finer abrasive steps.
The hook and loop attachment system makes disc changes quick and easy, so installers can switch between grits efficiently and reuse partially worn discs on later tasks.
The proprietary clog free coating provides a buildup resistant abrasive surface, helping the disc stay open and cutting effectively for more passes before the abrasive face loads.
The no hole design presents a continuous abrasive surface on the 6 inch disc, so installers position it on the hook and loop pad without aligning holes, keeping the full face engaged.
The Dynabrade DynaCut Extreme 6 inch 60 grit hook and loop no hole aluminum oxide on film sanding disc combines premium P graded aluminum oxide abrasives, a high performance 3 mil film backing, and a proprietary clog free coating to deliver fast cut and long life. The hook and loop attachment system supports quick changes and reuse of partially worn discs, which helps crews control abrasive costs while staying on schedule. Select this disc when a 6 inch 60 grit film-backed option with strong tear resistance and open cutting behavior fits the sanding work at hand.
Sold In: 1 Package