DynaCut 120 grit sanding sheet from Dynabrade is a coated abrasive strip using premium P grade aluminum oxide on C-weight paper in a 3/8 inch by 2 inch size. The P grade aluminum oxide abrasive cuts sharply across a broad range of surfaces, which supports controlled stock removal and consistent scratch patterns on hard and soft woods, plastics, fiberglass, composites and fabricated metals. The 120 grit rating positions this sheet for intermediate sanding where surface leveling and preparation before finer grits are important. A no hole PSA backing secures the sheet to compatible holders across its full area, helping maintain uniform contact and reducing slippage during passes. The compact 3/8 inch by 2 inch format concentrates the abrasive into a narrow strip, which is useful for detailed work along edges, profiles and small parts where full-size sheets are inefficient.
The 3/8 inch by 2 inch dimension defines a slim sanding strip that suits trim work, small components and detailed areas where control is critical. This tight footprint lets the user position the abrasive precisely along edges, corners or narrow profiles. The no hole PSA backing provides full-surface adhesion to compatible holders, which keeps the strip flat and stable during strokes. That stability helps transfer pressure evenly through the 120 grit aluminum oxide layer, supporting predictable material removal. The C-weight paper backing, described as durable yet moderately flexible, handles typical shop contact forces while still bending enough for light contour work on edges and transitions.
The Dynabrade DynaCut 120 grit no hole PSA aluminum oxide strip is positioned for sanding a wide range of materials, including wood, metal, aluminum, composites, solid surface materials and primed or painted surfaces. This breadth means a single abrasive type can move between cabinetry components, metal fixtures and composite parts without changing sheets. The strip also works across hard and soft woods, plastics, fiberglass, composites and fabricated metals, so it suits mixed-material assemblies and repair tasks. In practice, the 3/8 inch by 2 inch format places the premium P grade aluminum oxide in a narrow band, allowing careful sanding along edges of doors, frames or small moldings. The PSA backing keeps the abrasive fixed to a matching holder, supporting repeated passes along consistent paths.
The premium P grade aluminum oxide abrasive is described as sharp and free cutting across a broad range of surfaces, which supports repeatable performance when moving from one compatible material to another. That consistent cutting behavior helps maintain predictable scratch depth at 120 grit, useful before moving to finer finishing steps. The durable C-weight paper backing resists tearing, so the strip maintains its integrity under typical shop pressures and helps avoid interruptions from premature failures. At the same time, being moderately flexible allows the backing to follow gentle contours, aiding in smoothing transitions without creating flat spots. The non-contaminating, non-loading coating resists clogging when working on soft materials and coatings, which maintains more open abrasive surfaces for longer periods and supports steady cutting rates during extended sanding sessions.
The DynaCut sanding sheet is described as suitable for hard and soft woods, plastics, fiberglass, composites, fabricated metals, aluminum, solid surface materials and primed or painted surfaces, covering a wide range of shop materials.
The 3/8 inch by 2 inch size provides a narrow sanding area, which aids detailed work along edges, narrow parts and tight profiles where larger sheets are less manageable.
The C-weight paper backing is described as durable and tear resistant while still moderately flexible, so it supports firm pressure yet can follow gentle contours during sanding.
The no hole PSA backing adheres across the full strip area to compatible holders, helping the abrasive stay flat and stable for consistent contact and cutting action.
The non-loading coating is described as resisting clogging on soft materials and coatings, which supports longer disc life and more consistent sanding over extended use.
The 120 grit level positions the sheet for intermediate sanding, providing material removal and surface leveling before progressing to finer finishing grits.
The Dynabrade DynaCut 120 grit no hole PSA aluminum oxide sanding sheet combines premium P grade aluminum oxide, a durable yet flexible C-weight paper backing and a 3/8 inch by 2 inch strip format to address detailed sanding tasks. Its suitability for wood, metal, aluminum, composites, solid surface materials and primed or painted surfaces allows one abrasive type to serve varied shop work. For projects that span hard and soft woods, plastics, fiberglass, composites and fabricated metals, this strip offers consistent cutting behavior at an intermediate grit. Selecting this sheet aligns the abrasive choice with mixed-material requirements while supporting controlled, repeatable sanding passes.
Sold In: 1 Package