Quickscrews #8 x 1-5/8 flat head screw is a case hardened assembly screw with a Type 17 auger point and coarse thread in a zinc finish, so it is built for consistent driving and holding power in woodworking and cabinet assembly tasks. The flat head design lets the screw seat flush in standard countersunk holes, which keeps hinge plates, brackets, and other hardware sitting flat against the work surface. The #2 square drive interface reduces cam-out under torque, which supports steady driving with power tools and less bit slippage during repetitive work. Lengths over 1 inch are threaded two-thirds from the bottom of the screw, which leaves a smooth shank near the head to help clamp parts together tightly. The coarse thread pattern bites quickly, which is useful when pulling components together during production or installation.
This Quickscrews 12616 assembly screw uses a #2 square drive, giving installers a stable bit engagement that supports positive drive in overhead, vertical, and tight-access positions. All lengths over 1 inch are threaded two-thirds from the bottom of the screw, so the partially unthreaded upper shank helps draw joint faces together as the threads pull from the tip section. The flat head profile is designed to sit level in a countersunk recess, which helps hardware and joinery components line up cleanly on cabinet sides, rails, or panels without rocking. The Type 17 auger point works with the coarse thread to establish a quick bite, helping the screw move into the material smoothly while maintaining control during power driving.
The Quickscrews #8 x 1-5/8 flat head assembly screw with coarse thread and Type 17 auger point is suited to general assembly where a flush-head, countersunk fastener is required in wood-based materials. The 1-5/8 inch length offers reach through typical cabinet components and into framing or mating members, giving installers flexibility across carcass, face frame, and support connections that use similar stock thicknesses. Because this screw uses a #2 square drive, it pairs with standard square drive bits already common in many woodworking and cabinet shops, supporting a consistent driving setup across related fasteners. The zinc finish matches many indoor fastener applications, so the screw can be used where a bright plated appearance is acceptable.
The case hardened construction of the Quickscrews 12616 assembly screw supports repeatable torque application, helping maintain head integrity under repeated bit engagement during production or install runs. The design where lengths over 1 inch are threaded two-thirds from the bottom of the screw helps the unthreaded upper shank act as a clamp section, improving pull-together action at the joint line when the screw is seated. The Type 17 auger point works with the coarse thread to establish fast starting and driving, which can reduce wandering at the tip and help screws follow layout lines accurately. The flat head geometry lets this square drive flat head screw sit flush with or just below the surface of the countersink, which is important when hardware, trim, or panels need to register tightly against the fastened member without interference from a proud fastener head.
The Quickscrews 12616 assembly screw uses #2 square drive bits, which provides solid bit engagement and helps reduce cam-out during power driving in cabinetry and woodworking tasks.
The Quickscrews #8 assembly screw is 1-5/8 inches long, giving reach through common cabinet components and into mating material for firm fastening in many woodworking assemblies.
This Quickscrews 12616 screw has a coarse thread that advances quickly into wood, helping joints draw tight with fewer turns during cabinet and furniture assembly work.
For this screw, all 1 inch lengths are fully threaded, while other sizes are threaded two-thirds from the bottom, which aids in clamping parts together along the unthreaded shank near the head.
The Quickscrews #8 x 1-5/8 screw uses a Type 17 auger point, which helps the tip start in wood and supports smoother entry when driving into typical cabinet materials.
The Quickscrews 12616 assembly screw has a zinc finish, providing a plated surface suitable for many indoor woodworking and cabinet applications.
The Quickscrews #8 x 1-5/8 flat head assembly screw with #2 square drive, coarse thread, Type 17 auger point, case hardened body, and zinc finish offers a focused option for wood-based assembly tasks. When a countersunk, square drive fastener of this length and style aligns with your cabinet or woodworking layout, this screw provides a consistent fastening solution for repetitive shop or field work.
Sold In: 6000 Each