Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Quickscrews #6 x 3/4-inch flat head installation screw is built for mounting European cup hinges, side-mount drawer slides, and other cabinet hardware to the face panels and interior walls of frameless and face-frame cabinets. The 3/4-inch length matches the standard panel thickness used in most cabinet production, seating the screw firmly without punching through the back face.
European cup hinges and drawer slides are pre-drilled with mounting holes sized for a #6 gauge screw, and the hardware sits flush only when the screw head profile matches the countersink in the mounting plate. The flat head on this screw seats cleanly into those plates without rocking or standing proud. At 3/4 inches long, the screw threads deep enough into the panel for reliable grip while keeping the tip well within the material on standard 3/4-inch cabinet sides, bottoms, and face frames. Cabinet shops running production lines will find the 5000-count box keeps the station stocked through long runs without constant restocking.
The #2 square drive holds the screw on a correctly sized bit for one-handed placement, which matters when the other hand is steadying a hinge plate inside a cabinet box. The Type 17 auger point features a longitudinal flute that clears chips as the screw enters, reducing the torque required to drive into plywood and hardwood panels and lowering the risk of splitting near a pre-bored cup hole or line-bore hole. The coarse thread pulls the screw down firmly with each revolution. The nickel finish coordinates with the hardware it anchors: most European hinges and zinc-body drawer slides carry a similar silver tone, so fastener heads that remain visible inside the cabinet read as part of the hardware rather than an afterthought.
This screw suits cabinet shops, installers, and millwork teams that build or install frameless cabinetry and face-frame cabinets using European hardware. It handles the full range of 32mm system installation work: cup hinges on door panels, undermount and side-mount drawer slide mounting clips, shelf pin hardware brackets, and other components that ship with pre-drilled mounting plates. The 3/4-inch length also covers light hardware-mounting tasks in furniture casework and built-in applications where panels run at standard thickness. For shops that work in volume, the 5000-count box reduces per-unit cost and keeps the assembly bench or install bag supplied without frequent reorders.
Yes. European cup hinges use mounting plates pre-drilled for a #6 gauge screw, and the flat head on this screw seats cleanly into those plates. The 3/4-inch length is appropriate for mounting plates installed into standard 3/4-inch cabinet panels.
Not in most cabinet materials. The Type 17 auger point is designed to cut into plywood, MDF, particleboard, and hardwood panels without a separate pilot hole, though very dense hardwoods near edges may benefit from one.
A #2 square drive bit. This is a standard size carried by most cabinet shops and contractors.
The nickel finish provides light corrosion resistance suitable for dry indoor cabinetry environments. It also coordinates visually with the chrome and nickel tones of most European hinge and drawer slide hardware.
Yes. Side-mount drawer slides and undermount slide mounting clips are typically pre-drilled for a #6 screw. The flat head seats flush against the bracket face and the 3/4-inch length is appropriate for standard panel thickness.
A correctly sized, well-matched installation screw makes hinge and slide mounting faster and cleaner. This Quickscrews #6 x 3/4-inch flat head with square drive and Type 17 auger point delivers the head profile, length, and drive engagement that cabinet hardware installation calls for, packaged in a quantity that keeps production moving.
Sold In: 5000 Each