Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Docking Station for 520PRO/720 Kreg KPHA750 creates a premium benchtop joining station for the Kreg Pocket-Hole Jig 520PRO, so a portable jig can work like a stable shop tool when you are drilling pocket holes all day. The docking base holds the 520PRO so it stays positioned on the bench, which supports consistent hole locations from part to part. The Docking Station also works with the Pocket-Hole Jig 720, so one setup can serve either jig on the bench. Kreg Tool designs this Docking Station specifically for pocket-hole joinery, so details like support, clamping, and storage are aimed at speeding up repetitive drilling. Together, the base, wings, and clamp turn a small-format jig into a more comfortable workstation, which matters when supporting plywood, long rails, and repeated pocket-hole runs in the shop.
This Docking Station turns a handheld Kreg Pocket-Hole Jig 520PRO into a benchtop joining station by docking it into the base, so you gain a fixed drilling position during layout. The Pocket-Hole Jig Clamp locks the dock and jig to your workstation, so the entire assembly resists sliding as you load boards, drill holes, and clear chips. Material support wings extend from the base to carry longer boards, so the workpiece is not cantilevered while you operate the jig. An adjustable stop connects to the wings, setting a physical reference for pocket-hole spacing so you can slide workpieces against it and maintain consistent offsets along an edge.
This Docking Station for 520PRO/720 Kreg KPHA750 is built for pocket-hole joinery on a workbench, so installers and woodworkers can handle larger workpieces with a compact jig. When you dock the Pocket-Hole Jig 520PRO into the base, the jig gains a stable footprint on the bench, so drilling feels more like using a stationary machine than a handheld tool. Material support wings extend from that base to carry long boards and plywood, so face frames, rails, and case parts do not sag while you drill near the ends. Because the wings disconnect for repositionable support, the same setup can back up a small drawer part or a long cabinet side by sliding or relocating the wings where the cut pattern demands support. Fold-up wings stay attached yet swing out of the way, so the station can live on a crowded bench and still be deployed quickly when pocket-hole work returns.
The adjustable stop that attaches to the material support wings is designed for repeatable pocket-hole positioning, so once you dial in the offset from an edge, each subsequent board registers to the same reference. That repeatability helps parts assemble flush, because holes land at matching locations across multiples. Storage compartments in the material support wings hold Kreg pocket-hole screws, drill bits, and related items, so the consumables you need for each joint stay with the station instead of being scattered around the shop. The Pocket-Hole Jig Clamp secures the dock and your jig to the workstation, so drilling forces are absorbed by the bench rather than moving the jig and marking your layout. Because the Docking Station also works with the Pocket-Hole Jig 720, a shop that uses both jigs can rely on a single benchtop layout to maintain familiar positioning and workflow from one tool to the other.
Docking Station for 520PRO/720 Kreg KPHA750 creates a premium benchtop joining station for the Kreg Pocket-Hole Jig 520PRO, so the jig works in a stable, bench-mounted role.
This Docking Station works with the Kreg Pocket-Hole Jig 520PRO by docking it into the base, and it also works with the Pocket-Hole Jig 720 for benchtop pocket-hole drilling.
The material support wings extend the work surface for long boards and plywood, so stock stays better supported and flatter while you drill pocket holes across larger pieces.
The material support wings disconnect for repositionable support, so you can adjust where they sit to back up short parts or very long boards during pocket-hole drilling.
The adjustable stop attaches to the support wings and sets up for repeatable pocket-hole positioning, so multiple workpieces share the same pocket-hole offset from the edge.
The Pocket-Hole Jig Clamp secures the dock and jig to your workstation, so the assembly stays put under drilling pressure and helps maintain accurate hole placement.
This Docking Station for 520PRO/720 Kreg KPHA750 is designed to turn the Kreg Pocket-Hole Jig 520PRO into a premium benchtop joining station while also supporting the Pocket-Hole Jig 720, so one setup handles varied pocket-hole jobs. Material support wings, an adjustable stop, and the Pocket-Hole Jig Clamp work together to support long material, repeatable positioning, and a secure workstation. Add this Docking Station when a stable bench-mounted pocket-hole layout will speed up your drilling and assembly workflow.
Sold In: 1 Each
