Pocket-Hole Jig Clamp Kreg KPHA760 is a Kreg Tool clamp designed to secure Kreg Pocket-Hole jigs to a workstation, so drilling setups stay stable during pocket-hole work. This clamp works with 500-Series and 700-Series Pocket-Hole Jigs, which lets you use the same clamp across multiple Kreg jig systems on the bench. The clamp is great for converting a portable Pocket-Hole Jig 520PRO into a benchtop setup, so a jig normally used on-site can be set up solidly on a work surface. It is also compatible with the Pocket-Hole Jig 720 and 720PRO to provide additional security while drilling, which helps keep the jig from shifting as you cycle through repetitive holes. The clamp features all-steel construction that holds up under regular jig clamping, which matters when the jig is used daily in a woodworking or cabinet shop.
This POCKET-HOLE JIG CLAMP allows Kreg Pocket-Hole Jigs to be secured directly to a workstation, so the jig effectively becomes part of the bench during drilling. When a 500-Series Pocket-Hole Jig, such as the 520PRO, is converted from portable to benchtop use with this clamp, the jig stays fixed to the work surface, which helps keep drill angles consistent across multiple joints. For 700-Series Pocket-Hole Jigs, including the Pocket-Hole Jig 720 and 720PRO, this clamp adds security to the jig setup, so the body of the jig resists movement while stock is clamped and released. The result is a more controlled drilling workflow around the jig, with less time spent repositioning the jig itself between cuts.
The Pocket-Hole Jig Clamp from Kreg Tool is designed for 500-Series and 700-Series Pocket-Hole Jigs, so it fits directly into workflows built around those Kreg jig families. When paired with a Pocket-Hole Jig 520PRO, the clamp lets that portable jig function as a benchtop station, so the same jig can be set on a stable workstation for repetitive drilling. In shops using Pocket-Hole Jig 720 or 720PRO, the clamp adds a workstation connection point, so the jig stays put while handling cabinet parts, face frames, or similar pocket-hole assemblies. Because the clamp secures the jig to a workstation, it suits bench setups where the jig remains in a fixed location during a run of parts, which supports consistent hole placement over many pieces.
The POCKET-HOLE JIG CLAMP uses all-steel construction to hold Kreg Pocket-Hole Jigs firmly against the workstation, so flex in the clamp body is minimized during repeated clamping cycles. This construction supports accurate pocket-hole drilling because the jig base remains solid as workpieces are placed, clamped, and released. When 500-Series Pocket-Hole Jigs are converted from portable to benchtop use with this clamp, the fixed position on the bench helps keep the drilling reference constant from part to part, which reduces the chance of joint variation across a project. For 700-Series jigs like the Pocket-Hole Jig 720 and 720PRO, the added security during drilling helps the jig resist twisting or creeping under side loads from the drill, which supports straighter pocket-hole paths in production-style workflows. The clamp therefore ties the jig and bench together into one working unit, which is useful wherever repeatable pocket-hole spacing and consistent joint preparation are priorities.
Pocket-Hole Jig Clamp Kreg KPHA760 secures 500-Series and 700-Series Pocket-Hole Jigs, so it works with models such as the Pocket-Hole Jig 520PRO, 720, and 720PRO on a workstation.
The Pocket-Hole Jig Clamp converts a portable Pocket-Hole Jig 520PRO into a benchtop setup, so the jig stays fixed on a work surface for repetitive drilling operations.
Clamping 700-Series Pocket-Hole Jigs to a workstation adds security and stability, so the jig resists movement while drilling pocket holes through multiple parts.
The clamp's all-steel construction keeps the clamping body rigid under frequent use, so the jig remains steady through repeated drilling cycles in shop environments.
The Pocket-Hole Jig Clamp works with the Pocket-Hole Jig 720 and 720PRO to provide additional security when drilling, so these jigs stay anchored firmly to the workstation.
Securing the jig to a workstation turns the jig and bench into a single stable unit, so drill angles and hole positions stay more consistent across many workpieces.
The POCKET-HOLE JIG CLAMP Kreg KPHA760 anchors Kreg 500-Series and 700-Series Pocket-Hole Jigs to a workstation, so pocket-hole drilling runs stay controlled and repeatable. By converting a Pocket-Hole Jig 520PRO to benchtop use and adding security to Pocket-Hole Jig 720 and 720PRO setups, this Kreg Tool clamp supports stable jig-based workflows. For shops and serious builders relying on Kreg Pocket-Hole jigs, selecting this all-steel clamp ties the jig directly to the bench, so drilling operations stay steady from the first pocket hole to the last.
Sold In: 1 Each