
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Micro-Pocket Drill Guide Kit 730 Kreg KPHA730 is a dedicated micro pocket hole setup that works with 700-Series Pocket-Hole Jigs to create compact pocket holes. The Micro-Pocket drill guide block drops into your 700-Series Pocket-Hole Jig so you can switch from standard to smaller-diameter pocket holes without changing jigs, which keeps your bench workflow consistent when moving between project sizes. The matching Micro-Pocket drill bit then cuts pocket holes that are 25% smaller in diameter than a standard pocket hole, so joints in thinner material remove less wood while still providing a pocket for a Kreg pan-head pocket-hole screw. This kit is designed for small projects, repairs, and work in 1/2 inch material, so you can keep using pocket-hole construction when a full-size pocket hole would be too large for the stock.
This Micro-Pocket Drill Guide Kit for 700-Series Pocket-Hole Jigs uses a drop-in drill guide block, so changing from standard to micro pocket holes is a matter of swapping the block before drilling, which keeps setup time short between tasks. The matched Micro-Pocket drill bit works in that guide to cut the smaller-diameter pocket hole in one motion, so your drilling feels familiar if you already use a 700-Series Pocket-Hole Jig. Because it is described for 1/2 inch material and narrow stock down to 1 inch wide, the drilling pattern is suited to tighter layouts on slim parts, helping you keep the screw path centered in the workpiece. Using the kit on small projects and repairs lets you keep pocket-hole spacing predictable across both new builds and on-site adjustments.
The Kreg Tool Micro-Pocket Drill Guide Kit 730 KPHA730 is identified for use with 700-Series Pocket-Hole Jigs, so it fits into that jig family when you need compact pocket holes. When you insert the Micro-Pocket drill guide block into your 700-Series Pocket-Hole Jig, the jig becomes configured to drill micro pocket holes instead of standard ones, which means the same jig base can cover both large and small work. The Web Description states this kit is perfect for small projects, 1/2 inch material, and narrow stock, so it slots into work where cabinets, drawers, or light framing use thinner pieces that do not suit standard pocket-hole diameters. Because it works with narrow stock down to 1 inch wide, it supports face frames and other slim rails where joint placement is critical along a limited width.
The product drills pocket holes that are 25% smaller in diameter than standard pocket holes, so each pocket removes less wood, which leaves more material surrounding the screw in thinner stock. That smaller diameter is especially relevant when working with 1/2 inch material because the reduced excavation helps maintain edge integrity and reduces the chance of opening up the side of narrow pieces. The Web Description also notes that the kit is compatible with Kreg pan-head pocket-hole screws, so the compact hole geometry still accepts a pan-head screw that can clamp the joint without altering your screw inventory. Using this Micro-Pocket setup when building small projects and making repairs means your joints in delicate or narrow components can follow the same predictable pocket-hole pattern while being scaled appropriately to the material size.
The Micro-Pocket Drill Guide Kit 730 is described for use with 700-Series Pocket-Hole Jigs, so it fits into that specific Kreg jig series for drilling compact pocket holes.
The Micro-Pocket drill guide and bit drill pocket holes that are 25% smaller in diameter than standard holes, which reduces removed material and suits thinner stock.
The Kreg Micro-Pocket Drill Guide Kit is described as perfect for small projects, repairs, and thinner stock, so it supports work where standard pocket holes are too large.
The kit is stated to work with 1/2 inch material and narrow stock down to 1 inch wide, so it targets slim pieces used in small assemblies.
The product is described as compatible with Kreg pan-head pocket-hole screws, so those screws seat into the compact holes created by the Micro-Pocket setup.
The Micro-Pocket drill guide block inserts into a 700-Series Pocket-Hole Jig, so the jig body serves as the base while the block defines the micro pocket hole path.
The Kreg Tool Micro-Pocket Drill Guide Kit 730 KPHA730 is tailored to 700-Series Pocket-Hole Jigs, so it directly supports compact pocket hole drilling where that jig family is already in use. Because it drills holes that are 25% smaller in diameter than standard pocket holes and is suited to 1/2 inch material and narrow stock down to 1 inch wide, it aligns with thin, precise work where material is limited. When small projects, repairs, or light assemblies call for pocket-hole strength in tight dimensions, this Micro-Pocket kit provides a scaled pocket-hole pattern built for those tasks.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KJKPHA530 Mfr# KPHA530 | Micro-Pocket Drill Guide Kit 530 Kreg KPHA530 | ||||
Sold in: 1 Each | KJKPHA540 Mfr# KPHA540 | Micro-Pocket Drill Bit with Stop Collar and Hex Wrench Kreg KPHA540 |