
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Micro-Pocket Drill Bit with Stop Collar and Hex Wrench Kreg KPHA540 is an Easy-Set Micro-Pocket drill bit set designed to work with the Micro-Pocket Drill Guide Kit models KPHA530 and KPHA730, so it serves installers already using those guides. This stepped Micro-Pocket drill bit is made for creating pocket holes that are 25% smaller, which helps when a more compact joint is needed on cabinet and furniture parts. The drill bit is designed specifically for use with Kreg 500-Series and 700-Series Pocket-Hole Jigs, so it fits directly into those jig workflows on site or in the shop. The set is intended for use with 1/2 inch stock and narrow stock down to 1 inch wide, which lets users work on smaller face frames and tight components where a standard pocket-hole size would feel crowded.
The Easy-Set Micro-Pocket drill bit in the KPHA540 set is designed for use with Kreg 500-Series and 700-Series Pocket-Hole Jigs, so users keep the same clamping and drilling pattern they already use. This stepped Micro-Pocket bit is paired in its design with a stop collar, which sets drilling depth so pocket holes match the pocket-hole jig settings and the stock thickness. The web description states that the bit is intended for 1/2 inch stock and narrow stock down to 1 inch wide, so it aligns with smaller workpieces that often need consistent but less obtrusive pocket joints. Because the bit removes less material, the drilling stroke is described as faster and easier, which supports smoother operation across multiple joints during a run of cabinets or built-ins.
The Easy-Set Micro-Pocket Drill Bit with Stop Collar and Gauge/Hex Wrench Kreg KPHA540 is designed to be used with the Micro-Pocket Drill Guide Kit models KPHA530 and KPHA730, so it fits directly into workflows already built around those guides. This Micro-Pocket configuration is for Kreg 500-Series and 700-Series Pocket-Hole Jigs, which positions it for installers using these jigs on cabinetry, furniture frames, and similar assemblies. The web description specifies that the bit works with 1/2 inch stock and narrow stock down to 1 inch wide, so it suits narrow face-frame parts and smaller rails where a full-size pocket hole would take up too much material. Because the pocket holes created are 25% smaller, the joints take up less surface area, which is useful on parts where visual footprint or available fastening area is limited.
The stepped Micro-Pocket drill bit in the KPHA540 configuration is designed specifically to work with the Micro-Pocket Drill Guide Kit KPHA530 and KPHA730, and with Kreg 500-Series and 700-Series Pocket-Hole Jigs, so the interface between bit, guide, and jig is aligned for repeatable hole placement. The product description highlights that the bit removes less material, which leads to faster, easier drill strokes, helping users maintain consistent pressure and speed across multiple joints. The stated use on 1/2 inch stock and narrow stock down to 1 inch wide ties the hole size and bit geometry directly to thinner and smaller parts, so the resulting pocket depth and spacing stay within the material limits of those pieces. The set specification mentions a thickness gauge/wrench for Kreg 500-Series and 700-Series Pocket-Hole Jigs, which ties thickness reference and basic adjustment into the same tool used at the jig, helping keep drilling depth and pocket-hole size consistent from part to part.
The Micro-Pocket drill bit KPHA540 is designed for Kreg 500-Series and 700-Series Pocket-Hole Jigs, so it drops into those systems without changing the basic drilling routine.
The Micro-Pocket drill bit is specified to create pocket holes that are 25% smaller, so the holes occupy less surface area on each workpiece.
The Kreg KPHA540 Micro-Pocket drill bit is designed for use with Micro-Pocket Drill Guide Kit models KPHA530 and KPHA730, so it aligns with those guide blocks for accurate pocket-hole drilling.
The product description states that the Micro-Pocket drill bit works with 1/2 inch stock and narrow stock down to 1 inch wide, so it suits smaller rails and stiles.
The Kreg Micro-Pocket bit removes less material, which results in faster, easier drill strokes during pocket-hole work across multiple pieces.
The thickness gauge and wrench in the KPHA540 design are specified for Kreg 500-Series and 700-Series Pocket-Hole Jigs, helping align thickness reference and bit adjustment at the jig.
The Micro-Pocket Drill Bit with Stop Collar and Hex Wrench Kreg KPHA540 is built around Kreg 500-Series and 700-Series Pocket-Hole Jigs and the Micro-Pocket Drill Guide Kit models KPHA530 and KPHA730, so it fits directly into those Kreg workflows. Its design creates 25% smaller pocket holes in 1/2 inch and narrow 1 inch wide stock, giving more flexibility on compact cabinet and furniture parts. By removing less material for faster, easier drill strokes, this Micro-Pocket configuration supports efficient, repeatable pocket-hole work where a smaller joint footprint is preferred.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | KJKPHA530 Mfr# KPHA530 | Micro-Pocket Drill Guide Kit 530 Kreg KPHA530 | ||||
Sold in: 1 Each | KJKPHA730 Mfr# KPHA730 | Micro-Pocket Drill Guide Kit 730 Kreg KPHA730 |