Company Information
Services
Approved US Government VendorCage Code: 1UXJ6
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Copyright © 2004-2026, Würth Baer Supply Company. All Rights Reserved.
Rev-A-Shelf cutlery drawer is a pre-assembled wood drawer system made to replace an existing drawer in a frameless cabinet. This Rev-A-Shelf maple cutlery drawer uses soft-close full extension slides and a door mount drawer system layout so the unit works with your attached drawer front. The two-tiered drawer system doubles drawer space by adding an upper tier that slides back inside the cabinet on ball-bearing slides. The deeper design is intended for larger kitchen items such as taller pots, pans, and mixing bowls. This deep kitchen drawer organizer is designed for a 30 inch frameless cabinet with a 28.5 inch opening, and adjustable door mount brackets are included and required for operation.
Key specs to confirm: This maple cutlery drawer is designed for frameless cabinet construction only and for a 30 inch frameless cabinet with a 28.5 inch opening. Before ordering, confirm your actual cabinet opening width, your cabinet construction type, and that your existing drawer front can be attached to the included adjustable door mount brackets. Also confirm the available cabinet depth and height needed for a deep two-tiered drawer system, since those dimensions are not provided in the verified data. Load rating, compliance details, and any installation tolerances are not stated here and should be confirmed with the manufacturer or technical documentation.
What's included: One fully assembled maple wood drawer box, soft-close full extension slides, a top tier that slides back on ball-bearing drawer slides, and adjustable door mount brackets. The buyer supplies and attaches the existing cabinet drawer front.
What to verify before ordering: Confirm frameless cabinet construction, 28.5 inch opening width, suitability for a 30 inch cabinet, space for the deep drawer and upper sliding tier, and compatibility of your drawer front with the required door mount setup.
A two-tiered drawer system is useful when a standard single drawer wastes cabinet height or makes lower items hard to reach. In many kitchens, installers and remodel buyers run into a common problem: the cabinet box has room for more storage, but the existing drawer only uses one level. This Rev-A-Shelf cutlery drawer addresses that by replacing the current drawer with a pre-assembled maple drawer that adds a second tier.
The upper tier slides back into the cabinet on ball-bearing drawer slides, which helps expose the lower section without taking parts out by hand. That layout is practical for buyers who want to separate utensils or smaller kitchen items above while keeping larger cookware below. The verified product description also notes that the deeper drawer is suited to taller pots, pans, and mixing bowls. For a buyer planning a frameless cabinet drawer replacement, that means the product is not just about organization. It also helps reclaim vertical space in a cabinet opening already present in the kitchen.
This door mount drawer system is intended for frameless cabinet construction only. That point matters during planning because face frame and frameless cabinets install differently. The unit is designed for a 30 inch frameless cabinet with a 28.5 inch opening, so the opening should be measured before purchase rather than assumed from the nominal cabinet size. Because the drawer box replaces your existing drawer and requires your own drawer front, the condition, size, and mounting suitability of that front should also be checked. Buyers should confirm depth and height clearance for the top sliding tier, since those measurements are not listed in the verified data.
For installers, the pre-assembled construction can simplify the job. Instead of building a wood drawer system from parts, the drawer box arrives assembled and ready to install. The included adjustable door mount brackets are required for operation, which is important when planning labor and alignment. If you are sourcing a deep kitchen drawer organizer for a remodel or service replacement, this product is best matched to projects where the cabinet opening and construction type are already known.
When comparing a wood drawer system, buyers usually focus on cabinet fit, slide style, assembly level, and how the drawer front attaches. This Rev-A-Shelf unit gives clear verified points on each of those areas. It is a fully assembled maple wood drawer built for a frameless cabinet opening, it uses soft-close full extension slides, and it includes adjustable door mount brackets that are required for operation.
That combination can make evaluation easier because the product role is specific. It is not a loose organizer insert and it is not a generic drawer box without mounting hardware. It is a replacement drawer system intended to install into an existing drawer opening after the current drawer is removed. The top tier also slides back on ball-bearing slides, which supports access to the lower compartment in a way a single fixed tray does not.
Another useful comparison point is material and finish. The verified data states maple wood construction with a clear coat finish. For buyers who want a finished wood interior rather than an unfinished box, that is a practical detail. The main caution is compatibility. Since this product is for frameless cabinets only and sized around a 28.5 inch opening in a 30 inch cabinet, fit should be confirmed carefully. If a project needs load data, exact depth, exact height, or other technical limits, those details should be checked in manufacturer documentation before purchase.
This Rev-A-Shelf drawer system is designed for a 30 inch frameless cabinet with a 28.5 inch opening, so actual opening size and cabinet construction must be confirmed first.
This Rev-A-Shelf cutlery drawer is for frameless cabinet construction only. Follow manufacturer installation guidance and local building requirements where applicable.
This pre-assembled maple drawer comes fully assembled and is intended to replace your existing drawer.
This door mount drawer system is made for you to attach your existing cabinet drawer front to the unit.
This Rev-A-Shelf wood drawer system includes adjustable door mount brackets, and they are required for operation.
The top tier of this two-tiered drawer system slides back inside the cabinet on ball-bearing drawer slides to help access the lower section.
This deep kitchen drawer organizer is described for larger items such as taller pots, pans, and mixing bowls.
Depth and load details are not provided in the verified data, so those should be confirmed with the manufacturer or technical documentation.
This maple cutlery drawer requires a frameless cabinet, a 28.5 inch opening, and enough interior space for the deep drawer and sliding upper tier.
Soft-close full extension slides make this Rev-A-Shelf cutlery drawer a practical replacement when you need more usable space in a frameless cabinet. You get a fully assembled maple wood drawer system, the upper sliding tier, and the adjustable door mount brackets required for operation. Before purchase, confirm that your cabinet is frameless, that the opening measures 28.5 inches in a 30 inch cabinet, and that your existing drawer front can be attached correctly. If your project needs exact depth, height, or load details, verify those with current manufacturer documentation.
Sold In: 1 Each