
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rev-A-Shelf cutlery drawer gives a frameless cabinet drawer a deeper, more organized storage layout without rebuilding the cabinet box. This wood drawer system from Rev-A-Shelf is a pre-assembled maple cutlery drawer designed to replace your existing drawer in a 36 inch frameless cabinet with a 34.5 inch opening. The two-tiered drawer system adds usable space by stacking storage levels, while the top tier slides back inside the cabinet on ball-bearing drawer slides. Soft-close full extension slides with BLUMOTION help the drawer open fully and close quietly. This door mount drawer system includes adjustable brackets that are required for operation, and it is built so you can attach your existing cabinet drawer front to the unit.
Key specs to confirm: This Rev-A-Shelf frameless cabinet drawer is designed for frameless cabinet construction only and for a 36 inch frameless cabinet with a 34.5 inch opening. Buyers should confirm the cabinet opening width, drawer opening condition, and whether the cabinet can accept a door mount drawer system with adjustable brackets. Because this is a two-tiered drawer system, also verify that interior cabinet depth and height will allow the upper tier to slide back properly. The product data verifies 90 lb full-extension BLUMOTION slides with soft-close, but any unlisted load, compliance, or additional dimensional details should be confirmed with the manufacturer or technical documentation.
What's included: A fully assembled maple wood drawer box with clear coat finish, soft-close full-extension BLUMOTION slides, ball-bearing slides for the top tier, and adjustable door mount brackets required for operation are verified as included. The buyer supplies and attaches the existing cabinet drawer front.
What to verify before ordering: Confirm frameless cabinet construction, a 34.5 inch opening in a 36 inch cabinet, available interior space for the deep kitchen drawer organizer layout, and that your current drawer front can be reused with the included adjustable mounting brackets. Follow manufacturer installation guidance and local building requirements where applicable.
A two-tiered drawer system is useful when a standard drawer wastes vertical space and forces tools, utensils, or cookware into separate cabinets. In a busy kitchen, that usually means shallow drawers hold small items while larger pieces such as mixing bowls, taller pots, or pans end up stacked in harder-to-reach base cabinets. This Rev-A-Shelf cutlery drawer addresses that problem by combining a deep lower storage area with an upper tier that slides back inside the cabinet.
For a buyer planning a drawer front replacement, the practical advantage is that the drawer box comes pre-assembled and is intended to replace your existing drawer. That can simplify the job for installers and serious DIY buyers who want to improve access without building a custom box from scratch. The included adjustable brackets are required for operation, and the product is designed so you can attach your existing cabinet drawer front. That helps preserve the cabinet's visible finish while changing the storage function behind it.
This maple cutlery drawer is also built for a specific cabinet type. It is for frameless cabinet construction only, so buyers working with face-frame cabinets should stop and confirm compatibility before ordering. The verified fit target is a 36 inch frameless cabinet with a 34.5 inch opening. If your opening differs, or if interior obstructions reduce usable space, those details should be checked against the manufacturer's technical information before installation.
The deep kitchen drawer organizer format is especially helpful when the goal is to separate upper-level cutlery or small kitchen tools from bulkier items below. Because the top tier moves on ball-bearing drawer slides and the lower drawer uses soft-close full extension slides with BLUMOTION, the layout is meant to improve access across both levels. Full extension is important in a base cabinet because it allows more of the drawer contents to come into view, which can reduce digging through stacked items.
When buyers compare drawer systems in general, the most useful differences often come down to installation style, cabinet compatibility, and how the drawer behaves under daily use. This Rev-A-Shelf wood drawer system provides verified details that help with that comparison. It is a pre-assembled maple drawer box, it uses soft-close full extension slides with BLUMOTION, and it includes adjustable door mount brackets required for operation.
Those details matter because some replacement drawers require more assembly, some are not built for a door-mounted front, and some do not provide full access to the back of the drawer. Here, the full-extension slide format supports reach, while soft-close action supports controlled closing. The upper tier sliding back inside the cabinet is another practical distinction, since it allows access to the lower storage area without removing components.
Material also matters in a replacement drawer project. This unit uses maple wood construction with a clear coat finish, which gives buyers a finished wood drawer system rather than an unfinished box that needs additional prep. For installers, that can make job planning more straightforward. For owners updating an existing kitchen, the ability to attach the current cabinet drawer front can help keep the exterior appearance consistent.
The main point to compare carefully is fit. This product is not described as universal. It is designed for frameless cabinet construction only and for a 34.5 inch opening in a 36 inch cabinet. If your cabinet type, opening, or interior clearance differs, confirm those measurements before purchase rather than assuming a replacement drawer will adapt on site.
This Rev-A-Shelf cutlery drawer is designed for frameless cabinet construction only, so cabinet type must be confirmed before ordering.
This frameless cabinet drawer is designed for a 36 inch frameless cabinet with a 34.5 inch opening.
This door mount drawer system is designed so you can attach your existing cabinet drawer front to the unit.
Adjustable door mount brackets are included and are required for operation.
This Rev-A-Shelf wood drawer system comes fully assembled and ready to install into an existing cabinet drawer opening.
This maple cutlery drawer uses 90 lb full-extension BLUMOTION slides with soft-close, and the top tier slides on ball-bearing drawer slides.
This two-tiered drawer system is described as suitable for larger items like taller pots, pans, or mixing bowls.
This deep kitchen drawer organizer should be checked for interior cabinet clearance so the upper tier can slide back properly.
This frameless cabinet drawer is specified for frameless cabinets only, so face-frame use should be confirmed with the manufacturer before purchase.
This drawer system should be installed by following manufacturer installation guidance and local building requirements where applicable.
Frameless cabinet drawer projects go more smoothly when the cabinet type, opening width, and front-mount details are confirmed before purchase. This Rev-A-Shelf cutlery drawer includes the assembled maple drawer box, soft-close full extension slides, upper-tier slide hardware, and adjustable door mount brackets required for operation. Before ordering, verify that your cabinet is frameless, that the opening is 34.5 inches in a 36 inch cabinet, and that your existing drawer front can be attached as intended. Those checks help match the drawer system to the cabinet without guesswork.
Soft-close full extension slides are a core part of how this Rev-A-Shelf drawer system functions in daily use. They support full drawer access and controlled closing, while the upper tier adds a second storage level that slides back for access below. For buyers comparing replacement drawer options, the key points remain straightforward: this is a fully assembled maple wood drawer system, built for frameless cabinets only, and intended for a 34.5 inch opening in a 36 inch cabinet. Confirm those fit details before ordering.
Sold In: 1 Each