Nickel Soft-Close Hinge for Full Overlay Face-Frame and Frameless Cabinets

The Salice Series B CBP2AE9 is a concealed full overlay hinge with integrated Silentia soft-close, finished in nickel, and designed for wood doors on both face-frame and frameless cabinets.

Key Features

• Silentia soft-close damps the door through the final closing arc so it settles without impact.
• Full overlay straight arm positions the door to cover nearly the full cabinet side, leaving a narrow reveal.
• 110 degree opening angle delivers standard everyday swing for residential and commercial cabinetry.
• Screw-on mounting fastens directly to the cabinet without requiring pre-drilled system holes.
• Nickel finish on steel coordinates with pulls, knobs, and other visible hardware in a nickel palette.
• Three-way adjustment allows height and side correction after the door is hung.

Built for Full Overlay Doors on Wood Cabinets

A full overlay door covers nearly the entire cabinet side, leaving only a narrow gap between adjacent doors. That look depends on correct arm geometry, and the straight arm on this hinge sets that position precisely. The 35mm cup bores into the back of the door, and the arm connects to a base plate mounted to the cabinet, ordered separately. Screw-on mounting means the plate fastens with wood screws directly into the cabinet stile or side panel, with no requirement for pre-drilled 5mm system holes. That makes this hinge a practical fit for site-built cabinetry, furniture, and renovation work where the cabinet box was not line-bored from the start.

Nickel Finish and Quiet Close

The hinge body is steel with a nickel finish. Nickel reads as a warm neutral on installed hardware and holds up well across cabinet interiors where the hinge may be partially visible on glass-front or open doors. The Silentia damping system is built into the hinge, so no separate add-on damper is needed. The mechanism slows the door through the last degrees of travel, protecting both the cabinet box and the door finish from the repeated stress of daily slamming. Use Salice plates in this finish to keep the hardware consistent where it shows.

Where This Hinge Fits

This hinge suits wood doors in the standard 16 to 22mm thickness range on face-frame or frameless cabinet boxes. It is a solid choice for custom shops running mixed cabinet types on a single project, for designers specifying a soft-close hinge that pairs with a nickel hardware package, and for remodelers hanging doors on existing cabinets without system holes. Because the plate mounts with screws rather than pressing into pre-bored holes, it also works well in retrofit situations where the original cabinet has no 5mm line-bore pattern. A matching Salice base plate is required and sold separately; plates from other brands will not engage this arm.

Common Questions

Reliable Soft-Close in a Finish That Works Hard

Specify this hinge when the job calls for full overlay doors that close quietly, mount without system holes, and carry a nickel finish that coordinates across the whole hardware package.