Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Würth #6 x 5/8" flat head screw is designed for mounting European cup hinges, drawer slides, and cabinet hardware to panel interiors where 3/4" and longer screws would risk breaking through. The short 5/8" length keeps this screw working where depth is the constraint, and the Nickel finish keeps the head low-profile inside finished cabinet boxes.
Most hinge and drawer slide mounting plates come pre-bored for a specific screw gauge, and most cabinet panels run 3/4" thick. When a hinge plate sits on the face of that panel, a 3/4" or 1" screw can punch through to the visible side. The 5/8" length stops short of the back face, giving you reliable thread engagement in the panel without the risk of breakthrough. This makes it the right call for face-mount hinges on thinner material, for hardware clips on manufactured panels, and for any mounting position where panel depth is tight. Drawer slide clips, soft-close adapter plates, and compact hinge bodies all share this constraint.
The flat head countersinks into the hardware mounting hole so the screw head sits flush or just below the surface. That matters inside a cabinet box where a proud head can interfere with drawer boxes or door swing. The #2 Phillips drive is the industry default for installation screws, so no bit swap is needed when moving between hinges, slides, and other hardware during an install. The Nickel finish gives the head a neutral appearance that reads as finished rather than raw inside painted and natural-finish cabinet interiors.
This screw fits two distinct situations well. In a production cabinet shop, it goes in by the hundreds per day driving European hinges and undermount drawer slides into frameless and face-frame boxes. In a finish installation setting, it handles the same mounting tasks on site, where hardware arrives loose and slides and hinges get mounted to the cabinet before the unit goes in the wall. The coarse thread works reliably in the plywood, MDF, and industrial particleboard panels that most cabinet carcasses are built from. The box of 1,000 is a practical quantity for either context, supporting a full kitchen run without stopping to reorder.
When a hinge plate or slide clip mounts to the face of a 3/4" cabinet panel, longer screws can break through the back face. The 5/8" length keeps the tip inside the panel while still getting solid thread engagement in the substrate.
Yes. The coarse thread is designed for low-to-medium density engineered wood panels including particleboard, MDF, and plywood, which are the standard materials in cabinet carcass construction.
No. The sharp point self-starts in panel material without a separate pilot hole step, which keeps installation moving on a production line or at a job site.
It is sized for European cup hinges, side-mount and undermount drawer slides, and other cabinet hardware with pre-bored mounting holes designed for a #6 gauge screw.
This screw is intended for interior cabinet work. It is not rated for exterior, wet, or high-humidity environments.
When shallow panel depth is the controlling factor, the Würth #6 x 5/8" Nickel hinge and drawer slide installation screw delivers the thread engagement you need without the breakthrough risk a longer screw would bring.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 10 Each |  WW614176461 Mfr# 0614176461005 10 | #2 x 1" Phillips Drive Insert Bit (10/Bag) |