Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This Würth #6 x 3/4" hinge and drawer slide installation screw is built for mounting European cup hinges and drawer slide hardware to cabinet panels. The 3/4" length suits shallow panel work where a longer screw would punch through, and the flat head seats flush in hinge mounting plate holes without standing proud.
Three-quarter inch is the go-to length when panel thickness or interior clearance makes a longer screw a liability. Side panels on frameless cabinet boxes, face-frame stiles, and hinge-mounting rails are often 3/4" thick — a screw that matches that dimension threads in fully without breaking through the back face or into an adjacent space. Drawer slide brackets mounted to a finished interior also benefit from a short screw that locks the hardware in place without telegraphing through to the visible surface. For anyone hanging European cup hinges on thinner overlay doors or attaching compact slides to narrower panel stock, 3/4" gives full thread engagement right up to the head without running long.
The Nickel finish blends into cabinet interiors fitted with satin-nickel or chrome hardware, keeping fastener heads from standing out against light-colored melamine or white-painted interiors. The screw is coarse-threaded, which suits the wood-based panel materials — plywood, MDF, and particleboard — common in cabinet carcass construction. The sharp point allows the screw to self-start directly in those materials, so installers can drive straight to the hardware plate without a pre-drill step slowing the line. The flat head is designed to counter-sink into the pre-formed holes on standard hinge plates and drawer slide mounting clips, pulling the hardware flush against the panel face.
Cabinet shops running European hinge systems and side-mount or undermount drawer slides go through hinge and installation screws at volume. A dedicated installation screw — sized for hardware mounting plates, short enough for shallow panel work, and finished to coordinate with the hardware — removes one variable from the installation. The #2 Phillips drive means every member of an installation crew can reach for the bit already in their driver. The 1,000-count box supports a full production run without mid-job restocking.
When the cabinet panel is 3/4" thick, a 3/4" screw engages the full panel depth without risk of breaking through the opposite face or into an adjacent panel. It also works in thinner face-frame stock and on panels where interior clearance is tight behind the mounting location.
Yes. The flat head and coarse thread are matched to the pre-formed holes in European hinge mounting plates and standard drawer slide brackets. The short length suits the panel depths common in frameless and face-frame cabinet construction.
Coarse thread provides good pull-out resistance in plywood, MDF, particleboard, and solid wood — the materials most commonly used for cabinet side panels and face frames.
Primarily visual. The Nickel finish coordinates with chrome and brushed-metal cabinet hardware so the screw heads are less conspicuous inside the cabinet. For corrosion resistance in dry indoor cabinetry, the Nickel finish is adequate.
No. The sharp point self-starts in wood-based panel material. Most installers drive directly through the hardware mounting hole into the panel without a separate pilot step.
When shallow panel depths or tight interior clearances are the constraint, the Würth #6 x 3/4" hinge and drawer slide installation screw gives you the right length for the job, in a finish that works with the hardware already in the cabinet.
Sold In: 1000 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 10 Each |  WW614176461 Mfr# 0614176461005 10 | #2 x 1" Phillips Drive Insert Bit (10/Bag) |