Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
The Quickscrews #6 x 5/8-inch flat head hinge and drawer slide installation screw is a purpose-built fastener for mounting cabinet hardware to panels where depth clearance is limited. The 5/8-inch length seats hardware mounting plates securely without over-penetrating thin cabinet sides, door stiles, or face-frame stock.
Cabinet hinge plates, drawer slide clips, and hardware mounting brackets are designed to pull tight against the panel surface, and the fastener length determines how well that happens. At 5/8 inch, this screw drives through a hardware mounting plate and into the panel with enough thread engagement to hold securely, while stopping well short of the panel face on a standard 3/4-inch cabinet side. That makes it a practical choice for face-frame hinge installation, side-mount and undermount drawer slide clips, and any other hardware that mounts to interior cabinet surfaces with pre-bored pilot holes. It also works in narrower face-frame stock and thinner European cabinet panels where a longer screw would create clearance problems or show through.
The flat head profile countersinks against the mounting plate flange cleanly, keeping the hardware sitting flat and even on the panel. Coarse thread provides dependable pull-out resistance in the engineered wood substrates common to cabinet construction, including particleboard, MDF, and plywood. The zinc finish is matched to dry interior conditions, which is where this screw is designed to work. For moisture-prone or exterior applications, a higher-grade finish would be the right call.
At 25,000 screws per box, this SKU suits production cabinet shops running hinge and slide hardware across large runs of casework, as well as installers stocking a truck for a multi-cabinet job. The #2 Phillips drive means no specialty bits are needed, and the consistent screw geometry keeps installation repeatable from the first cabinet to the last. Homeowners installing or replacing a handful of hinges or slides will find the same screw performs just as well for smaller-scale work.
Yes. At 5/8 inch, the screw threads into a 3/4-inch panel with solid engagement while leaving a comfortable margin before the panel face. It is well suited for hinge plates and slide clips mounted on the interior face of a cabinet side.
The sharp point self-starts, but hinge plates and drawer slide clips already have pre-bored mounting holes that guide the screw automatically. In most cabinet hardware installations the mounting hole does the alignment work for you.
Yes. The #6 gauge, flat head, and 5/8-inch length are a standard match for the mounting plate holes on European cup hinges. The flat head seats against the plate cleanly so the hinge sits flush on the panel.
Yes. The coarse thread grips particleboard and melamine-faced panels effectively. It is one of the more common substrates this screw is used in for drawer slide installation.
The zinc finish is rated for dry indoor conditions. It is the right choice for cabinet interiors, not for outdoor or high-humidity applications.
When hinge plates and slide clips seat cleanly and stay put, doors hang straight and drawers travel true. The Quickscrews #6 x 5/8-inch installation screw gives production shops and working installers a reliable, bulk-quantity fastener sized precisely for the job.
Sold In: 25000 Each