Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
This is the left-hand drawer side profile from Hettich's AvanTech YOU drawer system, in Anthracite, at 550mm nominal length and 101mm side height. It is a steel structural side profile that forms the left wall of the drawer box, integrating with the AvanTech YOU runner and front fixing components to build a complete metal drawer.
The AvanTech YOU side profile is the structural side wall of a metal drawer box. It does not function as a standalone product; it works within the AvanTech YOU system alongside the corresponding runner, right-hand side profile, back panel, and front fixing bracket to form a complete drawer. This left-hand profile handles the left side of the box as you face the cabinet. For every drawer in a run, you need one left-hand and one right-hand profile at the same nominal length and side height.
The 550mm length suits kitchen base cabinets with a nominal 22-inch-range cabinet depth. The 101mm side height is the right choice for a standard kitchen utensil or cutlery drawer — deep enough to retain contents without eating into overhead clearance in stacked drawer configurations. If the project calls for a tall pantry pull-out or deep pot drawer, a taller side height from the AvanTech YOU program would be the correct selection.
Anthracite reads as a deep charcoal in the drawer interior. It suits cabinet programs where the box interior is part of the visible design — especially in handle-less kitchens where the drawer front opens to reveal the side profile and runner. Anthracite pairs well with dark lacquer fronts, black hardware, and matte laminate interiors. It also works as a deliberate contrast element inside lighter-finished cabinets when the design calls for a layered, two-tone interior. The Steel material holds the finish evenly along the profile's full 550mm length without the variation a painted wood surface might show.
Cabinet shops running Hettich AvanTech YOU systems source these profiles as components when building drawers to a specific height and length combination. The system's modular component approach means a shop can stock the side heights and lengths their standard carcass sizes call for, then add runners, backs, and front fixings per order. Designers specifying AvanTech YOU by name for a contract kitchen or bath project should confirm the nominal length against the cabinet depth and the side height against the drawer content. Ordering by component also suits shops replacing a damaged side profile in an existing AvanTech YOU installation without pulling the full drawer set.
This listing is for the left-hand profile only. To complete one drawer you need both a left-hand and a right-hand AvanTech YOU side profile at the same nominal length and side height, ordered as separate SKUs.
No. AvanTech YOU components are engineered for the AvanTech YOU system. They are not compatible with Actro, Quadro, or other Hettich series runners and fixings.
At minimum: the matching right-hand side profile, the AvanTech YOU runners for 550mm nominal length, a back panel sized to the system's cutting formula, and the front fixing brackets for 101mm height. The drawer bottom and front are supplied by the builder. Confirm current component listings against the Hettich AvanTech YOU system documentation.
The source data lists the material as steel and the finish as Anthracite but does not specify the finishing process. For confirmation of finish type and cleanability, refer to Hettich's AvanTech YOU system documentation.
Specifying the correct hand, height, and length at the order stage eliminates the most common delay in metal drawer system builds. This Anthracite left-hand profile in 101mm x 550mm is one precise component in the AvanTech YOU system — order it alongside its right-hand counterpart and the matching runners to arrive at the job ready to assemble.
Sold In: 20 Each