AvanTech YOU Left Hand Drawer Side Profile, 101mm Drawer Height, Anthracite, 400mm

AvanTech YOU Left Hand Drawer Side Profile Use

AvanTech YOU left hand drawer side profile gives a dedicated side component for the Hettich AvanTech YOU drawer system, so builders get a defined left-hand structure for consistent drawer construction across a run of cabinets. The 101mm drawer height establishes the side wall height, which sets usable drawer depth and helps keep contents controlled in everyday motion. With a 400mm length, this side profile supports drawers built around that depth, aligning box layout with common cabinet carcass dimensions. The anthracite finish presents a dark, uniform appearance along the drawer side, which matters when designers want hardware to recede visually inside modern casework. Integrated vertical, lateral, and tilt adjustment are built into this profile, so installers can fine-tune drawer position within the cabinet after mounting. That adjustment capability lets fitters correct small casework tolerances and bring fronts into alignment without rebuilding drawer boxes.

Key Drawer Side Details That Support Work

• The Hettich AvanTech YOU drawer system classification ties this left hand side profile to a defined drawer construction platform, which helps fabricators standardize parts and repeat a proven layout from project to project.
• The 101mm drawer height set by this profile determines the side wall elevation, so planners can match interior storage expectations and coordinate with other drawer heights in a bank for a consistent visual rhythm.
• The 400mm length gives a clear design depth for the drawer box, which simplifies casework planning when laying out cabinet depths and allows installers to align slides and fronts at a predictable projection.
• The anthracite finish on the drawer side profile provides a dark, uniform appearance, which supports contemporary kitchen and furniture designs where internal hardware is expected to look clean and understated.
• The manufacturer part number 9255174 uniquely identifies this specific left hand profile, which helps shops reorder the exact same component and avoids mix-ups between different AvanTech YOU sizes or orientations.

Installation And Adjustment Traits Of This Profile

The integrated vertical adjustment in this AvanTech YOU left hand drawer side profile lets installers shift the drawer box height relative to the slide interface, which helps bring drawer fronts into line when cabinet openings vary slightly. Lateral adjustment built into the profile allows side-to-side fine tuning, so gaps between fronts can be evened out across a cabinet bank without modifying the carcass. Integrated tilt adjustment gives an angular correction option, helping align the top and bottom of fronts so reveals stay parallel along tall drawer stacks. Because the component is left hand specific, installers can position it on the correct side of the drawer box, keeping the system layout consistent with Hettich AvanTech YOU design conventions and simplifying field adjustments later.

Drawer Construction Role And Real-World Alignment

Where This AvanTech YOU Profile Fits In

This left hand drawer side profile belongs to the Hettich AvanTech YOU drawer system, so it functions as a primary sidewall component within that platform rather than a generic drawer part. The 101mm drawer height means it is suited to applications calling for a mid-height drawer, such as utensil drawers, office storage, or general cabinet drawers, where a low front is not sufficient and a deep pan drawer is unnecessary. At 400mm length, the profile works in drawer layouts built around that depth, supporting cabinets sized for that projection so the slide choice and box depth remain coordinated. The anthracite finish positions this profile for use in design schemes that favor dark, minimal internal hardware, such as modern kitchens, bath vanities, or furniture pieces where the interior needs to match darker exterior finishes.

How Integrated Adjustment Supports Clean Results

The integrated vertical, lateral, and tilt adjustment in this drawer side profile lets installers correct common cabinet and drawer variances without rebuilding components, which is valuable on site when working around real-world tolerances. Vertical adjustment allows the drawer box to move up or down in small increments, so the top edges of fronts can line up across wide cabinet runs even when the cabinet floor or rails are slightly out of plane. Lateral adjustment offers controlled side-to-side movement, helping close or open reveals between adjacent fronts until the visual spacing is even from left to right. Tilt adjustment provides fine angular correction, which is useful for setting parallel gaps at the top and bottom of tall drawer fronts so they track cleanly with nearby doors and panels. These combined adjustments reduce the need for structural alterations to the carcass, supporting a predictable installation sequence for shops that standardize on the AvanTech YOU system.

Common Questions About This AvanTech YOU Profile

Selecting This Drawer Side For Your Next Build

AvanTech YOU left hand drawer side profile with 101mm drawer height and 400mm length gives cabinet shops a defined component for mid-height drawers within the AvanTech YOU platform. The anthracite finish, powder coated steel construction, and integrated vertical, lateral, and tilt adjustment come together to support clean alignment and contemporary visual results. For projects planned around the Hettich AvanTech YOU drawer system and the 400mm depth, this left hand profile offers a clearly specified sidewall choice that fits into a repeatable drawer construction workflow.