Mission tall square bun foot gives cabinets and furniture a straight, simple termination at the floor using a 4 x 2-1/2 x 2-1/2 footprint for a compact, load-bearing stance that suits tight residential or commercial layouts. The unfinished wood construction lets you bring this component into your existing finishing sequence so stain, paint, or clear coats can visually tie base units together across a run. As part of the Pro Value Series, this bun foot supports project-standardization where recurring profiles matter over time. Being in the Decorative Hardware & Moldings class of bun feet, it visually finishes toe areas while lifting casework just off the floor for a more intentional, furniture-style look. Alder material keeps the visual in the hardwood family and aligns with many shop-standard face frames and doors, simplifying aesthetic coordination across jobs.
The 4 inch overall height, combined with the 2-1/2 inch square plan dimension, gives clear reference points when laying out mounting locations on cabinet bottoms or furniture frames. Because this component is categorized as a bun foot within Decorative Hardware & Moldings, it is intended to be a visible structural termination at the floor rather than a concealed support. The square mission profile means there is no rotation-dependent face to manage during layout, so orientation decisions focus on alignment with cabinet sides and fronts instead of decorative direction. Alder as the base material machines predictably using typical woodworking tools, which supports clean shoulders and bearing surfaces where the bun foot meets the case bottom.
This mission tall square bun foot serves work where a straight, squared profile is preferred over turned or highly profiled feet, such as simple mission-style cabinets, islands, or furniture pieces. The 4 inch height keeps the visual mass tight to the floor, aligning well with lower base designs that do not require tall legs. Being part of the bun feet product class, it is suited for corners and intermediate points along case bottoms where visible support is desired rather than hidden bases. The 2-1/2 inch by 2-1/2 inch footprint lets this component sit neatly under standard cabinet side thicknesses, helping the load path transition cleanly from carcass to floor. Because it is identified specifically as a mission tall square bun foot, it supports projects where straight lines and squared geometry are design priorities.
The defined 4 x 2-1/2 x 2-1/2 sizing means repeated installations can be laid out with the same clearances from cabinet edges, supporting tight alignment when multiple cabinets or furniture units share a single run. Unfinished wood allows the bun foot to receive the same primer, stain, or topcoat system used elsewhere on the project, which helps color and sheen stay consistent from bases to doors and trim. Being alder, the wood species responds similarly across units as you work through machining and finishing processes, reducing variation that could show at the base line. The Pro Value Series branding ties this bun foot to a stable line item for shops developing standard builds, assisting with future reorders under the SZDW11006AL manufacturer part number when matching existing work. As a Decorative Hardware & Moldings bun foot, it also prevents visual gaps at floor transitions by presenting a finished, intentional termination point on each unit.
The mission tall square bun foot measures 4 inches in height with a 2-1/2 inch by 2-1/2 inch square footprint, so layout and clearances can be planned around those fixed dimensions.
This Pro Value Series bun foot is made of alder, which keeps it within a common hardwood species group used for cabinet fronts, moldings, and other decorative components.
The 4 x 2-1/2 x 2-1/2 bun foot is made of unfinished wood, allowing it to move directly into your own sanding, staining, painting, or clear-coating process.
The 2-1/2 inch square footprint offers a compact, even contact area, simplifying layout at corners or along case bottoms without needing to align a decorative face.
The SZDW11006AL part number identifies this specific mission tall square bun foot in alder, helping track and repeat the same component across different projects.
This decorative bun foot sits within the Decorative Hardware & Moldings category, visually tying the base of cabinets or furniture to other trim and molding choices.
This mission tall square bun foot in unfinished alder offers a defined 4 x 2-1/2 x 2-1/2 size that drops cleanly into cabinet or furniture layouts where a squared base detail is needed. As a Pro Value Series component within the Decorative Hardware & Moldings bun feet class, it supports repeatable use across multiple jobs while staying visually consistent with alder-based fronts and trims. For projects calling for a straightforward mission profile at the floor line, this bun foot provides a clear, measurable way to finish the base and carry your chosen finish system right down to the support point.