Mission Tall Square Bun Foot identifies this Pro Value Series component as a squared, mission-style bun foot sized for furniture or cabinetry bases. The 4 inch x 3-1/2 inch x 3-1/2 inch dimensions set the overall height and footprint, so you can plan layouts, toe spaces, and clearances around a consistent block size. Being made of unfinished wood creates a raw surface, allowing sanding, staining, or painting as part of the same finishing schedule as the rest of the project. The alder material gives you a workable hardwood bun foot, so shaping and edge-tuning can be done with common woodworking tools. As a bun foot in the Decorative Hardware & Moldings category, it functions as a visible support or decorative base element, helping transition from cabinet or furniture case to the floor with a solid, squared profile.
The 4 inch x 3-1/2 inch x 3-1/2 inch sizing of this bun foot establishes the block you are working around when laying out corners, returns, and base rails, so cases, aprons, or stretchers can be dimensioned to land cleanly on its top surface. Because the bun foot is made of unfinished alder wood, it arrives ready for standard woodworking operations such as drilling pilot locations or easing edges, so mounting layouts can be integrated into your normal shop flow. Its square 3-1/2 inch by 3-1/2 inch plan simplifies orientation, since any face can align to a cabinet side or front, which helps when mirroring feet at opposite ends of a run.
This bun foot sits in the Decorative Hardware & Moldings category as a Bun Feet component, so it is intended for visible base support on furniture, cabinets, or similar casework. The 4 inch height positions the case body above the floor to create a defined base line, which can visually separate the main cabinet from the floor plane. With a 3-1/2 inch by 3-1/2 inch footprint, the square block works well at cabinet corners, center supports, or island ends where a compact but substantial base element is needed. The mission tall square form keeps faces flat and edges straight, so it pairs naturally with mission-style and other squared designs that rely on clean vertical lines and simple intersections rather than turned profiles.
The consistent 4 inch x 3-1/2 inch x 3-1/2 inch dimensions of this Pro Value Series bun foot allow repeatable layout work when multiple units share the same base detail, helping maintain uniform height and reveal lines across a project. Because it is built from unfinished alder wood, the surface accepts your sanding and finishing steps at the same time as face frames and moldings, which helps keep color and sheen consistent from base to upper sections. The square plan simplifies rotation and placement, so feet can be oriented without tracking directional grain features during assembly. Identified by manufacturer part number SZDW11007AL and SAP description FT10013AL, MISSION BUN FOOT,3.5'SQ ALDER, it can be referenced directly in drawings or material lists, supporting clear communication between design, purchasing, and the shop floor.
The bun foot measures 4 inches x 3-1/2 inches x 3-1/2 inches, giving a defined height and square footprint that helps set cabinet base elevation and floor contact area.
The Mission Tall Square Bun Foot is made of unfinished alder wood, so it can be worked with typical woodworking tools and finished to match surrounding cabinetry or furniture.
This bun foot is made of unfinished wood, allowing sanding, staining, or painting as part of your normal finishing process for a coordinated appearance.
The 3-1/2 inch by 3-1/2 inch square footprint provides a predictable mounting and floor contact area, simplifying corner placement and support spacing on cabinets or furniture.
The mission tall square style uses flat faces and straight lines, tying in with mission and other clean-lined designs where simple geometric bases are preferred.
The SZDW11007AL part number, also referenced as FT10013AL, lets you specify this exact alder mission bun foot consistently on drawings, orders, and job schedules.
The 4 inch x 3-1/2 inch x 3-1/2 inch Mission Tall Square Bun Foot in unfinished alder from the Pro Value Series provides a defined block size and material for cabinet or furniture bases. Its mission tall square profile supports clean-lined designs, while the unfinished wood surface allows finishing alongside the rest of the project. Referencing the SZDW11007AL part number streamlines specifying and reordering when you want the same base detail across multiple jobs.