4" x 3-1/2" x 3-1/2" Mission Tall Square Bun Foot, Cherry

Mission Tall Square Bun Foot For Furniture Projects

Mission tall square bun foot gives you a 4 inch tall, 3-1/2 inch by 3-1/2 inch support that works as a compact structural base for furniture pieces where a squat, square profile is preferred. The bun foot is part of the Pro Value Series, so it follows a standardized design that keeps multiple pieces visually consistent from cabinet to cabinet. Made of unfinished wood, it arrives ready for sanding, staining, or painting so the finished color can match or complement existing casework and trim. The cherry material gives the bun foot a fine-grain appearance that pairs well with cherry cabinetry and case goods, helping installers carry the same species from face frames down to the floor. As a bun foot in the decorative hardware and moldings class, it provides both support and a finished transition from case bottom to flooring on built-ins and freestanding pieces.

Key Bun Foot Details That Support Your Build

• The 4 inch height lets this Mission tall square bun foot set a defined toe space or lift for furniture pieces without creating an overly tall stance, which helps keep cabinets and chests visually grounded.
• The 3-1/2 inch by 3-1/2 inch square profile gives a substantial footprint at each corner, which spreads load at the base and creates a clean visual block rather than a turned leg look.
• The cherry material keeps the bun foot in the same species family as cherry cabinetry, which simplifies achieving a unified appearance across doors, frames, and base details on the same project.
• The unfinished wood construction allows field finishing with your chosen stain, clear coat, or paint, so installers can tune color and sheen to match other shop-finished components on the job.
• The Pro Value Series branding identifies this bun foot as part of a consistent line, which helps when repeating the same style across multiple rooms or future additions where matching matters.

Mission Bun Foot Dimensions And Finish Workflow

This Mission tall square bun foot measures 4 inches in height, so it sets the finished distance between the cabinet bottom and the floor and aligns with layouts planned around that clearance. The 3-1/2 inch by 3-1/2 inch square size defines the footprint at each corner, simplifying layout when spacing feet on case bottoms or bases. Made of unfinished wood in cherry, the bun foot can be integrated into a finishing schedule along with doors, drawer fronts, and face frames, allowing the same materials and timing to carry through the entire run of work. As a cherry component, it visually ties into cherry panels and frames once stained or clear-coated, so the base detail reads as part of the same build.

Using This Cherry Bun Foot In Woodworking

Where This Mission Tall Square Bun Foot Works Best

This Mission tall square bun foot is categorized under decorative hardware and moldings, so it is intended for visible applications where the base detail is part of the finished look. The 4 inch height works well under cabinets, chests, media pieces, or similar casework that benefits from a modest lift above the floor without exposing a large gap. With a 3-1/2 inch square footprint, the bun foot suits corners and short base runs where a compact yet solid-looking support is needed rather than a long furniture leg. Being made from cherry, it aligns naturally with cherry casework found in many woodworking projects, from kitchen cabinetry to built-in storage, so the material choice reinforces a consistent species story across panels, face frames, and trim. Because the wood is unfinished, it fits both new builds and refacing jobs where the final color is determined at the project stage, allowing the bun foot to integrate smoothly into existing room finishes.

Why The Unfinished Cherry Design Supports Consistent Results

The unfinished wood construction of this bun foot means it enters the workflow as a raw component that can be sanded, stained, or painted alongside other parts, keeping color and sheen consistent across a full furniture or cabinet run. Using cherry as the base material provides a grain structure and tone that respond predictably to cherry-focused stain systems, which helps installers hit target shades used on doors, drawer fronts, and panels. The 4 inch height is fixed and clearly specified, so design dimensions for plinths, end panels, and toe areas can be drawn with confidence around that measurement. The 3-1/2 inch by 3-1/2 inch square plan makes layout straightforward when positioning feet at corners or along a base rail, since every foot shares the same square profile. As part of the Pro Value Series with manufacturer part number SZDW11007CH, this bun foot can be specified repeatedly on drawings and orders, helping shops reorder the exact same style for future phases or matching work.

Common Questions About This Cherry Bun Foot

Select This Mission Bun Foot For Cherry Builds

The Mission tall square bun foot from the Pro Value Series delivers a 4 inch tall, 3-1/2 inch by 3-1/2 inch cherry base that matches decorative hardware and moldings work on cherry projects. The unfinished wood construction lets you bring it directly into your normal sanding and finishing sequence, so stain, paint, and clear coats align with surrounding components. With the SZDW11007CH part number, this bun foot can be added to drawings and order lists whenever a compact, Mission-style square support is needed at cabinet or furniture corners. For cherry casework that needs a sturdy, visually clean base detail, this bun foot provides a defined, repeatable solution.