Transitional square bun foot defines this 4 inch high alder foot as a clean, simple support for furniture or cabinetry where a mix of traditional and modern lines is needed. The 4 inch height establishes a modest lift that creates clearance under pieces without raising them excessively, which helps keep proportions balanced on small to medium casework. The 4-3/4 inch by 4-3/4 inch square footprint spreads load over a broader area, which supports stability on flat bottoms while limiting point pressure on finished floors. Being made of unfinished wood lets you sand and finish the alder to match existing stains or paints, which simplifies blending this foot into partial remodels or repairs. The alder species gives a workable hardwood that tools cleanly, which supports consistent shaping or edge easing before finishing. As part of the Pro Value Series, this foot aligns with a professional-grade component line suited to repeatable shop use. Sold in each format, this bun foot can be ordered in the exact quantity required for a specific piece or run.
The 4 inch height of this bun foot sets a predictable clearance zone that simplifies layout when you are planning toe space or vacuum access beneath furniture and cabinets. Its 4-3/4 inch by 4-3/4 inch square planform gives you a clear reference for locating the foot at corners or under panels, which helps align it with case edges for a uniform reveal. The square shape also makes orientation straightforward during layout, which reduces setup time compared with profiles that require directional alignment. Because the piece is unfinished alder, you can dry-fit, mark, then remove it for sanding and finishing without working around a factory topcoat, which supports a neater installation workflow.
The 4 inch height and 4-3/4 inch square size position this bun foot for use under furniture or cabinetry where moderate lift and a substantial base are needed. Its transitional square profile works in settings that blend contemporary and classic lines, which helps it fit into mixed-style kitchens, living rooms, or office furniture without drawing undue attention. The square footprint supports use at cabinet corners or under rectangular furniture bases, where the equal dimensions front-to-back and side-to-side simplify aligning the foot with edges. Because the foot is made of unfinished alder, it can be used on new builds or retrofits where color matching is critical, such as adding feet to stock cabinets or replacing damaged feet on existing pieces while maintaining a consistent appearance.
The 4 inch overall height directly affects how a piece interacts with floors and adjacent trim, which matters when creating clearance for cleaning equipment or for visual alignment with baseboards. The 4-3/4 inch by 4-3/4 inch square base distributes weight over more surface area, which supports stability when furniture is loaded or when cabinets carry heavy contents. The unfinished wood construction means the surface is open to accept stains, dyes, or paints during your normal finishing sequence, which helps integrate this part into established shop finishing systems. Working in alder gives predictable cutting and sanding behavior, which reduces rework from tear-out and helps achieve a smooth surface ready for topcoats. Identification under the Pro Value Series and SZDW11080AL part number ties this bun foot to a defined product line, which simplifies reordering for future projects and documenting parts used on a job.
The bun foot measures 4 inches high and 4-3/4 inches by 4-3/4 inches square, which sets both the lift from the floor and the footprint available for supporting furniture or cabinet bases.
The bun foot is made of alder, providing a workable unfinished wood that can be machined, sanded, and finished to align with surrounding furniture or cabinet components.
The bun foot is supplied as unfinished wood, allowing stains, paints, or other finishes to be applied as part of your standard finishing process for color-matched installations or repairs.
The 4 inch height provides a moderate lift that sets toe space and cleaning clearance, helping maintain comfortable proportions on casework without raising pieces excessively off the floor.
SZDW11080AL identifies this specific 4 inch high, 4-3/4 inch square transitional alder bun foot, which supports accurate specification and reordering for future furniture or cabinet projects.
This bun foot is sold in each format, so quantities can be matched directly to the number of support points needed on a furniture piece or cabinet run.
The 4 inch height, 4-3/4 inch by 4-3/4 inch square footprint, and unfinished alder construction position this transitional square bun foot as a flexible component for furniture and cabinetry work. Using the defined SZDW11080AL part number from the Pro Value Series simplifies specifying this exact piece in project notes or shop drawings. Sold in each quantities, it aligns easily with layouts that call for specific numbers of supports on a case or run. For projects that need a square, transitional profile and a finish-ready alder surface, this bun foot offers a straightforward path from layout to finishing and final installation.