Transitional square bun foot gives cabinets, furniture, or built-ins a defined wood base that visually finishes the piece and sets a consistent height across multiple units. The 4 inch height establishes a moderate lift that supports toe clearance while maintaining a grounded look. The 4-3/4 inch by 4-3/4 inch footprint creates a stable contact area that spreads load over a larger surface for dependable support on each corner. Made of unfinished wood, this foot arrives ready for sanding, staining, or painting so the installer can tune the appearance to match existing cherry components or coordinate with other finishes on the job. The cherry material provides a recognizable wood species option that aligns with cherry cabinetry and trim work, supporting visual continuity from floor to case. As part of the bun feet category, this component functions as a decorative and structural termination point for furniture-style bases.
The specified 4 inch height of this bun foot sets a clear reference when planning cabinet or furniture base elevations, so cut lengths and toe space can be laid out around a known dimension. The 4-3/4 inch square footprint defines the contact area with the underside of the cabinet or furniture frame, guiding where to position the foot relative to corners or stretchers. Being part of the decorative hardware and moldings category, this foot is intended to interact with finished surfaces, so its size helps the installer proportion the base visually against doors, drawers, and adjacent trim. The unfinished cherry wood structure allows drilling or fastening through the top face according to the shop's preferred mounting method, then finishing the assembly in one pass.
This transitional square bun foot is designed for use in decorative hardware and moldings applications, so it works as the visible base element on cabinets, furniture, or other casework where a furniture-style stance is needed. The 4 inch height supports applications that call for a modest lift off the floor, such as bath vanities or built-in cabinets, while still keeping the unit visually anchored. With a 4-3/4 inch by 4-3/4 inch size, the foot sits naturally at outside corners of larger pieces, giving enough width to look proportional under wider face frames. The cherry wood construction ties directly into cherry cabinetry and moldings, supporting projects where the goal is to extend an existing cherry program with matching species at floor level. As part of the Pro Value Series, this bun foot aligns with trade-focused decorative solutions for everyday shop and jobsite work.
The defined 4 inch height helps installers set up consistent reveals between the floor, toe spaces, and door bottoms, reducing layout variation when producing several units. The square 4-3/4 inch footprint gives a predictable outline, which simplifies jigging or marking positions on cabinet bottoms, especially when repeating the same pattern across multiple corners. The unfinished cherry surface means the foot can be sanded to blend edges with base moldings before any finish is applied, which supports a smooth transition between components. The clear manufacturer part number SZDW11080CH and the FT10006CH description provide traceable identification, helping shops reorder the same foot for future phases and maintain uniform appearance and height across a whole project.
The bun foot measures 4 inches high and 4-3/4 inches by 4-3/4 inches square, which sets both the installed height and the bearing area for layout and support.
The bun foot is made of unfinished cherry wood, allowing sanding and finishing to coordinate with cherry cabinets, moldings, or other woodwork on the project.
The unfinished cherry surface accepts stain, clear coat, or paint, so the installer can finish the bun foot at the same time as surrounding cabinetry or trim.
This bun foot suits decorative hardware and moldings applications such as cabinets, furniture, and built-ins where a 4 inch cherry wood base element is desired.
The 4 inch height provides a consistent base dimension, which helps align toe spaces, door clearances, and neighboring units using the same bun foot.
The 4-3/4 inch square footprint offers a wide contact area at each corner, helping distribute load and providing a visually substantial base under cabinets or furniture.
The 4 inch high transitional square bun foot in cherry offers a defined 4-3/4 inch by 4-3/4 inch base that supports stable cabinet or furniture corners while matching cherry casework. As an unfinished wood component, it folds directly into shop finishing schedules so color and sheen track with doors, frames, and moldings. With clear identification as Pro Value Series SZDW11080CH, it gives installers and shops a repeatable choice when a square cherry bun foot is required across multiple projects or phases.