traditional round bun foot defines this 4 inch x 3-1/2 inch x 3-1/2 inch Pro Value Series part as a compact, turned wood support, so it suits furniture or cabinetry needing a classic rounded base with a consistent footprint. The bun foot being made of unfinished wood allows sanding, staining, or painting as required, so it can be matched to a wide range of cherry or contrasting finishes on-site. Its 4 inch height establishes a moderate lift from the floor that can clear typical trim or low obstructions, while keeping the overall piece visually grounded. The 3-1/2 inch by 3-1/2 inch dimension provides a stable contact area that distributes weight over a defined pad, which matters when supporting casework corners or table bases. The cherry material designation gives a hardwood base species identity, which matters when planning color systems and edge detailing in coordinated projects.
The 4 inch overall height of this traditional round bun foot gives a fixed reference when laying out base heights, so installers can design plinth positions and floor reveals with consistent dimensions across a run. The 3-1/2 inch by 3-1/2 inch footprint defines the bearing area at each corner, which assists when determining how much structural support is needed at mounting points. The unfinished wood surface provides a raw substrate for primers, stains, or clear coats, which matters when scheduling finishing steps relative to installation. The cherry wood identity ties this bun foot into projects using cherry components, aiding in visual continuity once the finishing system is applied. As part of the Pro Value Series, this bun foot fits within a defined decorative hardware and moldings category, which helps shops standardize selections on repeat builds.
This traditional round bun foot, at 4 inches high and 3-1/2 inches in both width and depth, functions well as a structural and decorative base element on cabinets, chests, or tables that benefit from a modest lift. The defined dimensions support repeatable layouts when multiple pieces in a room share the same base style, keeping visual lines consistent around the space. Being made of unfinished wood, the bun foot can be finished in the same workflow as doors, drawer fronts, and moldings, which keeps color and sheen aligned across the project. The cherry material designation allows it to sit naturally with other cherry elements once finished, supporting unified grain character and tone in traditional or transitional designs.
The 4 inch height and 3-1/2 inch by 3-1/2 inch size give exact measurements that streamline drafting, cut lists, and CNC or jig programming when this Pro Value Series bun foot is specified across multiple units. Because the bun foot is made of unfinished wood, shops can control every stage of the surface build, from sanding through final topcoat, which supports consistent finishing standards from job to job. The traditional round profile offers a familiar geometry that reads correctly with other decorative hardware and moldings in the same category, helping maintain design language without custom turning. The cherry material reference provides confidence when selecting stains or clear finishes tailored for cherry, which can improve the final appearance on furniture or cabinetry built around this SZDW11196CH component.
This traditional round bun foot measures 4 inches high and 3-1/2 inches by 3-1/2 inches across, so layouts and corner supports can be planned using those fixed dimensions.
This Pro Value Series bun foot is made of unfinished wood in cherry, giving a known hardwood base species for matching other cherry components and finishes.
The bun foot is made of unfinished wood, so the surface arrives ready for sanding, staining, or painting within your existing finishing process.
This traditional round bun foot serves as a decorative and structural base element for cabinets, furniture pieces, or similar projects needing a 4 inch high support.
The SZDW11196CH part number identifies this specific 4 inch by 3-1/2 inch traditional round bun foot in cherry within the Pro Value Series line.
The 4 inch height sets a defined base elevation, which helps maintain consistent floor reveals and toe space across cabinets or furniture using this bun foot.
This 4 inch traditional round bun foot in cherry, made of unfinished wood, offers fixed dimensions and a known species that align well with cabinet and furniture workflows. When a project calls for a 3-1/2 inch by 3-1/2 inch base footprint and a 4 inch rise, this Pro Value Series component provides a consistent, repeatable solution. Add it to your next Wurth Baer Supply order when those measurements, material, and classic bun styling match the design brief.