Traditional Round Bun Foot defines this Pro Value Series component as a shaped wood support designed for furniture bases and casework. The 4 inch x 3-1/2 inch x 3-1/2 inch size sets a consistent profile, which helps create level, uniform heights across multiple pieces on the same job. Being made of unfinished wood means the maple surface is ready for on-site stain or paint, so finish can be matched directly to doors, face frames, or existing trim. The maple material gives a solid wood body, which provides a substantial feel wherever a bun foot is used as a visible support. As a bun foot within the Decorative Hardware & Moldings category, it serves both structural and visual roles at the bottom of cabinets or furniture. The Pro Value Series branding identifies it as part of a coordinated line, which can simplify repeat selections across projects.
The stated 4 inch height on this maple bun foot sets the working elevation from floor to cabinet or furniture base, which simplifies layout when you are repeating the part across a room. With a 3-1/2 inch by 3-1/2 inch footprint, each foot occupies a defined square area at corners or intermediate support points, which helps with base rail design and load transfer. The traditional round bun form concentrates the profile toward the center while staying within that footprint, giving you a clear expectation of how it will sit under face frames or case ends. Because the piece is unfinished maple, it is ready to be prepared, finished, and then mounted in line with your standard shop or site practices for wood feet.
This bun foot is categorized under Decorative Hardware & Moldings in the bun feet subgroup, placing it squarely in furniture and cabinet base applications where the support remains visible. The 4 inch x 3-1/2 inch x 3-1/2 inch size suits pieces that benefit from a moderate lift off the floor, such as case goods, vanities, or base cabinets designed with furniture styling. Its traditional round profile aligns with classic and transitional designs, letting it sit comfortably under paneled ends, applied moldings, or shaped aprons. The maple construction fits projects that already use maple fronts or trim, helping visual continuity from doors down to the floor line. Because it is offered as a decorative bun foot within the Pro Value Series, it can be repeated across multiple rooms or units while keeping the same look and dimensions.
The fixed 4 inch height allows you to standardize plinth and reveal dimensions from drawing through installation, reducing adjustments when multiple bun feet are used on a run. The 3-1/2 inch by 3-1/2 inch footprint defines corner coverage, which helps when setting case widths, corner blocks, or base frames so that the bun foot sits properly under structural members. Unfinished maple gives a neutral starting point for stains, clear finishes, or paint systems, which means the same component can be adapted across different finish schedules while keeping dimensions constant. The traditional round bun shape provides a known visual mass at the base, giving designers confidence about the proportion between the foot, door heights, and any decorative moldings above. The Pro Value Series designation links this part to an established line, supporting consistent sourcing across repeated projects where matching bun feet are required.
The bun foot measures 4 inch x 3-1/2 inch x 3-1/2 inch, which sets both its height from the floor and its footprint on the cabinet or furniture base.
The bun foot is made of unfinished maple, providing a solid hardwood body that can be stained or painted to coordinate with surrounding wood components.
The unfinished wood surface means the maple can be finished on site, so stain or paint systems can match cabinet fronts, moldings, or existing room finishes.
This product sits in the Decorative Hardware & Moldings category as a bun foot, identifying it as a visible base component for cabinets and furniture.
The traditional round bun shape supports classic and furniture-style bases, pairing well with paneled ends, applied moldings, and similar profiles.
The Pro Value Series brand identifies this bun foot as part of a named line, which helps keep look and sizing consistent across multiple projects.
This 4 inch x 3-1/2 inch x 3-1/2 inch Traditional Round Bun Foot in unfinished maple gives a defined size and style for furniture-style bases. The maple construction and bare surface let finishing align with your shop or site system. As a bun foot within the Decorative Hardware & Moldings category from the Pro Value Series, it fits into a coordinated approach to cabinet and furniture details. When a project calls for a classic bun foot in maple at this height, this specific part number SZDW11196MA offers a repeatable choice.