corner square face wood pedestal foot describes a 6 inch by 6 inch by 4-1/2 inch bun foot that supports and finishes cabinet or furniture corners, so installers can add a defined base height while keeping layout dimensions predictable. The Pro Value Series brand identifies this as part of a coordinated decorative hardware and moldings line, which helps projects stay visually consistent when multiple feet are used across a room. Being classified under bun feet means this component forms a visible base detail rather than hidden structural framing, so layout decisions can treat it as a design element. The wood pedestal foot construction gives a solid, single-piece support point at the corner, concentrating vertical load at a clear reference point during cabinet or furniture placement. Its 6 inch by 6 inch footprint sets a square bearing area at the corner, which simplifies marking, positioning, and repeating the same reveal on multiple units during installation.
This corner square face wood pedestal foot serves as a dedicated support at a cabinet or furniture corner, so layout begins from a known base point instead of relying solely on side panels. Its 6 inch by 6 inch dimensions define how far the base projects in both directions, which lets installers plot exact corner locations on the floor before setting the case. The 4-1/2 inch height sets the vertical separation between floor and case bottom, so fronts, doors, or drawer faces can be sized to that opening without later trimming. Because it is a bun foot within the decorative hardware and moldings category, it operates as both structure and finish detail, streamlining the transition between rough positioning and final appearance during install.
The 6 inch by 6 inch by 4-1/2 inch corner square face wood pedestal foot works at cabinet or furniture corners where a defined, square base is needed, because its footprint naturally registers against perpendicular faces. In kitchen, bath, or built-in cabinetry, the 4-1/2 inch height provides a set base line that can coordinate with toe spaces, applied base molding, or open furniture-style bases built to the same elevation. On standalone case goods or custom furniture pieces, the bun foot classification signals a traditional, furniture-style look, so builders can carry a unified base treatment from one piece to another. Being part of the Pro Value Series under decorative hardware and moldings keeps this foot aligned with a broader family of trim components, allowing planners to specify it wherever a matching pedestal detail is required around a room.
The 6 inch by 6 inch plan dimension gives installers a square reference that matches typical cabinet corner geometry, which speeds layout when transferring measurements from drawings to the shop or jobsite. The 4-1/2 inch height directly affects door and drawer proportions, so designers can calculate front heights and clearances around that fixed base dimension instead of adjusting after assembly. Classification as a bun foot means this piece is intended as a visible end condition to a cabinet or furniture side, which reduces the need for extra trim to finish the bottom edge. Its role as a wood pedestal foot consolidates load at a defined corner support, guiding how weight from the structure will be carried to the floor. The Pro Value Series brand connection also signals that this component belongs to a repeatable product line, which can simplify reordering when matching existing installations or expanding a run later.
The 6 inch by 6 inch by 4-1/2 inch size sets both the footprint and height, so layouts can be drawn with a known base projection and finished floor-to-cabinet bottom distance.
The bun foot classification identifies it as a visible base element, so it finishes the cabinet or furniture bottom while also carrying weight at the corner.
The corner square face configuration seats against two perpendicular faces, helping align the foot with cabinet sides and keeping the base visually square.
The 4-1/2 inch height fixes the base elevation, so door and drawer fronts can be sized to that clearance and case bottoms planned around the same offset.
Placement in decorative hardware and moldings defines this as a finishing element, so it is chosen to coordinate visually with other trim in the project.
The Pro Value Series brand ties this foot to a larger line, helping shops repeat specifications or extend matching installations using the same component.
This corner square face wood pedestal foot, identified as a 6 inch by 6 inch by 4-1/2 inch bun foot in the Pro Value Series, offers a defined base dimension for cabinets or furniture. Using its fixed height and square footprint, plan your next installation around a consistent, repeatable corner support that doubles as a finished decorative element.