Right curved edge wood pedestal foot defines this Pro Value Series component as a shaped support for cabinetry and furniture bases. The 6 x 1 x 4-1/2 inch size establishes a compact footprint that lifts the piece while keeping overall proportions controlled for built-ins and freestanding pieces. Being part of the Decorative Hardware & Moldings category positions it to visually finish toe areas, transitions, and exposed base runs. The bun foot product class identifies its rounded, traditional profile, which helps visually soften the joint between casework and floor. The cherry wood material provides a hardwood base that can be sanded and shaped during fitting, supporting tight joints at corners and returns. Its unfinished wood construction lets finishing steps align with doors, face frames, or existing trim so the foot visually matches the rest of the project.
This Pro Value Series bun foot, identified as manufacturer part SZDW11211CH, provides a defined 4-1/2 inch height that installers can design around when laying out cabinet bottoms and furniture aprons. As a pedestal foot within the Decorative Hardware & Moldings category, it is intended to sit at the base of the structure, giving a repeatable reference dimension from floor to casework. The 6 inch length and 1 inch thickness give predictable outer dimensions for layout, so multiple feet can be spaced along a base run with consistent reveals. Its right curved edge geometry makes it suitable for right-hand corners or ends, supporting symmetrical base designs when paired with an appropriate left-hand counterpart.
This 6 x 1 x 4-1/2 inch right curved edge wood pedestal foot fits projects that call for a traditional bun-style base detail in cherry. The right-hand curvature suits the exposed right end of cabinets, furniture pieces, or similar casework where a shaped outside corner is needed. As a bun foot in the Decorative Hardware & Moldings family, it visually anchors tall case sides by stepping the mass down toward the floor. The cherry species provides a consistent wood choice when the main casework, face frames, or moldings are also cherry, keeping grain and color development aligned through stain or clear finishes. Unfinished construction supports on-site blending with existing cherry surfaces, helping the base read as part of a single, continuous build. The 4-1/2 inch height gives visible clearance under the piece, which can help the cabinet or furniture look lighter while still reading as a solid base detail.
The fixed 6 inch length and 1 inch thickness let installers plan base spacing and overhangs knowing each pedestal foot will occupy the same footprint along the floor. This regularity helps set equal reveals between feet and adjacent moldings so long runs stay visually straight. The bun foot classification signals a rounded profile, which can help transition from vertical case sides to horizontal floor surfaces without sharp visual breaks. Being in the Pro Value Series gives a defined product family reference, so repeating SZDW11211CH across multiple rooms or units keeps detailing uniform. Because the foot is made of unfinished cherry, surface preparation and finishing steps can be integrated into the normal finishing workflow, allowing the same stain schedule or clear system to be carried across doors, frames, and these pedestal feet. The right curved edge form also gives a clear orientation during layout, reducing guesswork when positioning at right-hand corners.
The pedestal foot measures 6 inches long, 1 inch thick, and 4-1/2 inches high, giving a defined base size to plan floor-to-cabinet clearance and spacing along the run.
The foot is made of unfinished cherry wood, so it accepts sanding and finishing steps that align with surrounding cherry casework or trim.
This is a right curved edge wood pedestal foot, so it is oriented at right-hand corners or ends where the curved profile faces outward.
The foot is part of the Pro Value Series in the Decorative Hardware & Moldings category, grouping it with similar pedestal feet for coordinated projects.
The 4-1/2 inch height sets a predictable rise from floor to cabinet or furniture bottom, helping align toe and apron heights across multiple pieces.
SZDW11211CH is the manufacturer part number for this right curved cherry pedestal foot, supporting consistent reordering for repeat projects or matched replacements.
This 6 x 1 x 4-1/2 inch right curved edge wood pedestal foot from the Pro Value Series gives a defined cherry bun-style support for cabinet and furniture bases. With its unfinished cherry construction and known SZDW11211CH identifier, it can be specified wherever a traditional, right-hand cherry base detail is required and repeated confidently across multiple installations.