right curved edge wood pedestal foot is a 6 x 1 x 4 inch Pro Value Series component that supports furniture and millwork projects as a shaped base element. The bun feet product class defines it as a decorative support that visually lifts casework. The right curved edge layout gives one side a flowing profile, which helps tie into traditional cabinet and furniture styling on matching corners. The cherry wood material sets the color tone for projects built from cherry, so the base visually connects with doors, face frames, or moldings in the same species. The unfinished wood surface arrives ready for sanding, staining, or clear coating, which lets shops match existing finishes across a run of cabinets or match previously installed pieces. Sold in each format, this pedestal foot can be ordered in exact counts to match furniture corners or project layouts without excess stock.
The bun feet classification identifies this part as a load-bearing decorative support under casework, which helps installers plan mounting locations along cabinet rails or corner blocks. The 6 x 1 x 4 inch size defines the footprint they work around when laying out corners or interior bracing. The 4 inch height gives a clear working dimension from floor to cabinet bottom, which helps when coordinating base reveals with other room elements. As an unfinished cherry component, this foot can be processed with the same sanding grits and finishing schedule as the main cabinet parts, allowing it to move through existing shop workflows. Being sold in each quantities also supports layout-specific ordering, so shops can match the number of feet directly to cabinet corners or furniture designs.
The traditional right curved foot description signals that this pedestal foot is shaped for classic styling, which suits traditional cabinets, dressers, or built-ins where softer curves are preferred. The right curved edge layout makes it appropriate for right-hand corners, where the profile can turn in toward a face frame or skirt board. Classified under decorative hardware and moldings as pedestal feet, this part serves as both structure and trim, tying the lower edge of a cabinet or furniture piece into surrounding moldings. The 6 inch length gives enough span to visually anchor wider stiles or end panels, supporting heavier case sides without looking undersized. With a 1 inch dimension on the narrow edge, the foot occupies minimal horizontal space, so designers can use it on compact furniture or tight alcoves while still maintaining a finished base detail that looks deliberate.
The specified 6 x 1 x 4 inch size gives shops fixed reference numbers when drafting cut lists or CAD models, which reduces layout guesswork on new or repeat projects. The 4 inch height ties directly into many standard cabinet base heights, so runs of cabinetry can keep one consistent toe and reveal line. As a cherry wood component, this foot aligns with cherry-stock programs, allowing fabricators to source stain systems and clear coats that already work on their cherry doors and panels. The unfinished wood designation means the surface can be integrated into existing sanding and finishing lines, helping maintain color and sheen consistency from the foot up through the case. Identified as Pro Value Series with manufacturer part SZDW11210CH, this foot is easy to specify and reorder, which supports repeatable results across multi-unit jobs or later additions to existing cherry installations.
The 6 x 1 x 4 inch size defines the overall footprint and height, which helps align cabinet bases and plan floor clearances around the finished furniture or built-ins.
The pedestal foot uses cherry wood, which lets it visually integrate with cherry cabinets, furniture, and moldings when finished to match existing cherry components.
The pedestal foot is made of unfinished wood, allowing shop finishing teams to sand, stain, or clear coat it to match established cabinet or furniture finishes.
The part is classified under decorative hardware and moldings as a pedestal foot in the bun feet class, indicating it functions as a decorative structural support.
The right curved edge description means one side uses a curved profile for right-hand applications, helping designers coordinate matching corners on furniture bases.
Part number SZDW11210CH identifies this specific Pro Value Series cherry pedestal foot, helping shops specify, track, and reorder the same component across projects.
The 6 x 1 x 4 inch Pro Value Series right curved edge wood pedestal foot in cherry gives cabinet and furniture shops a defined-size base element that ties into cherry projects. The unfinished wood construction supports consistent shop finishing schedules, while the bun feet classification identifies its role as a decorative structural support in the hardware and molding system. With a traditional right curved profile and clear part identification as SZDW11210CH, this pedestal foot is ready to drop into drawings, material lists, and production runs where a cherry base detail is needed.