Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
5/8 inch diameter x 1/2 inch long standoff kit is a complete standoff kit for installing a sign or display, so you can mount panels with a consistent offset and a clean, professional stand-off look. The Pro Value Series branding identifies a standoff kit built as a practical choice for regular sign or display projects where consistent hardware sizing matters from job to job. The kit uses 5/8 inch diameter standard caps, which press the panel evenly against the barrels and help spread the clamping force across the panel face. Matching 5/8 inch by 1/2 inch barrels set the stand-off distance from the wall, creating a fixed 1/2 inch gap that keeps material off the surface for an even shadow line. Studs sized for material 1/4 inch to 3/8 inch thick tie the caps and barrels together through the panel, so common sign and display substrates within that thickness range stay securely held.
The complete standoff kit with combination screws and multi-purpose nylon anchors supports a straightforward workflow where anchors are set, barrels are secured, and then panels are mounted with studs and caps. The 5/8 inch by 1/2 inch barrels install over the combination screws, so once the anchors are placed at the layout points, each barrel threads on at a consistent projection depth. Studs sized for 1/4 inch to 3/8 inch thick material pass through the panel holes into the barrels, tying the face caps to the wall side components in one axis. The satin clear anodized aluminum surfaces of caps and barrels provide a smooth feel during hand tightening, which helps installers bring each cap down evenly to seat the panel against the barrel faces.
This standoff kit is described as a complete standoff kit to install a sign or display, so it fits projects where flat panels need to be spaced off a mounting surface. The 5/8 inch diameter standard caps suit signs or displays where visible hardware becomes part of the layout, giving a defined circular point at each mounting location. Barrels sized at 5/8 inch diameter by 1/2 inch long create a uniform 1/2 inch stand-off depth, making the hardware suitable for interior sign or display layouts that call for a modest gap instead of a deep projection. Studs sized for material 1/4 inch to 3/8 inch thick align with many rigid panels used in signs and displays, so installers can select substrates within that thickness band and rely on the stud length to engage properly.
The 5/8 inch diameter caps and barrels give a relatively broad bearing surface, which helps distribute load around each drilled hole in 1/4 inch to 3/8 inch thick material during tightening. The 1/2 inch barrel length fixes the stand-off distance, so spacing between panel and wall remains consistent across all mounting points, supporting straight sight lines in sign or display grids. Combination screws with multi-purpose nylon anchors create a fastening method that works with typical wall materials, allowing mounting points to be placed to match sign artwork or layout rather than limited structural points alone. The satin clear anodized aluminum finish provides a muted metallic look that reads as finished hardware without high shine, which helps the sign or display content remain the focus while the standoffs frame the panel geometry.
The 5/8 inch diameter x 1/2 inch long standoff kit uses studs for material 1/4 inch to 3/8 inch thick, so panels in that range clamp correctly between caps and barrels.
The standoff kit uses 5/8 inch by 1/2 inch barrels, so mounted panels sit about 1/2 inch off the surface, giving a controlled shallow stand-off suitable for interior signs or displays.
The 5/8 inch diameter x 1/2 inch long standoff kit has a satin clear anodized aluminum finish, which offers a neutral, low-glare appearance around the sign or display edges.
The Pro Value Series standoff kit is described for installing a sign or display, so it serves interior projects where flat panels are mounted with a small, consistent gap.
The standoff kit provides multi-purpose nylon anchors with combination screws, so barrels can fasten to typical wall materials at the planned sign or display locations.
The SZG4009 part number identifies this specific 5/8 inch diameter x 1/2 inch long satin clear anodized complete standoff kit within the Pro Value Series line.
The 5/8 inch diameter x 1/2 inch long standoff kit brings together standard caps, fixed-depth barrels, studs for 1/4 inch to 3/8 inch thick material, and wall fasteners described for sign or display installs. By working within the defined panel thickness and the 1/2 inch stand-off distance, layouts can repeat reliably across multiple signs using the same SZG4009 hardware pattern. For projects calling for a satin clear anodized aluminum look with visible 5/8 inch caps, this Pro Value Series standoff kit offers a consistent set of dimensions and components that support clean, repeatable mounting results.
Sold In: 1 Kit
