Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Wood utility tray gives kitchen drawers a dedicated place for larger utensils and cutlery. The Rev-A-Shelf utensil tray insert is a maple drawer insert designed to drop into 15 inch wide and 21 inch wide base drawers. This trimmable wood utility tray is made of maple hardwood and is intended for use with large cutlery and kitchen utensils. For buyers looking for a drawer insert for utensils, this base drawer organizer offers a simple drop in drawer insert format that can be trimmed to exact size with a table saw. The listed product size is 24 inch W x 22 inch D x 2-7/8 inch H, and this version is the standard height option in the 4WUT Series.
Key specs to confirm: This Rev-A-Shelf wood utility tray is listed at 24 inch W x 22 inch D x 2-7/8 inch H and is described as a maple hardwood insert for 15 inch wide and 21 inch wide base drawers. Because it is a trimmable tray, confirm your actual drawer interior width, depth, side clearance, and inside height before cutting or installing. Buyers should also confirm whether the standard 2-7/8 inch height is appropriate for the drawer box and the utensils being stored. Safety, load, compliance, and any additional technical details are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: Verified information confirms a Rev-A-Shelf 4WUT Series maple wood utility tray insert. Packaging is described as sold in each or set, as shown below, so included quantities should be confirmed before ordering.
What to verify before ordering: Check drawer interior dimensions, confirm the target base drawer width, verify that trimming is acceptable for your install method, and confirm whether you are ordering a single tray or a set.
A drawer insert for utensils is often chosen when a standard flatware tray does not handle larger kitchen tools well. In many kitchens, long serving spoons, spatulas, whisks, and oversized cutlery end up loose in a base drawer. That makes access slower and can cause items to slide, stack, or catch when the drawer opens and closes. This Rev-A-Shelf utensil tray insert is built for that use case. The product is described as a wood drawer insert made of maple hardwood and designed for large cutlery and kitchen utensils.
For a cabinet shop, installer, or serious DIY buyer, the practical advantage is the combination of a drop in drawer insert format and a trimmable wood utility tray design. The insert is intended to drop into 15 inch wide and 21 inch wide base drawers, while also allowing trimming to exact size with a table saw. That matters when the drawer interior does not match a stock organizer exactly. Instead of trying to work around wasted side space, the buyer can plan the fit around the real drawer box dimensions. Before cutting, confirm the measured interior width, depth, and available height of the drawer.
This maple drawer insert is listed at 24 inch W x 22 inch D x 2-7/8 inch H. The product description also notes that the series comes in two height options, shallow at 2-3/8 inch and standard at 2-7/8 inch, and this specific model is the standard height version. That can help buyers who are replacing an existing tray or matching multiple drawers in one kitchen. If your project includes pullouts, drawer hardware, or interior obstructions, verify clearances first. The product data does not provide compartment layout details, mounting hardware details, or a cut-to chart, so those points should be confirmed if they affect your install plan.
When comparing a maple drawer insert to other organizer styles, many buyers focus on material, sizing flexibility, and the intended drawer application. This Rev-A-Shelf product gives clear verified points for all three. It is a maple hardwood tray, it is designed as a drop in insert, and it can be trimmed to exact size with a table saw. Those facts make it easier to evaluate for custom cabinet work, replacement of an older wood tray, or a new kitchen drawer setup where a stock fit may need adjustment.
Another practical comparison point is use case. Some organizers are aimed at standard flatware only, while this kitchen utensil tray is described for large cutlery and kitchen utensils. That distinction helps buyers avoid ordering a shallow or narrow organizer that does not match the tools stored in a base drawer. The listed size of 24 inch W x 22 inch D x 2-7/8 inch H also gives a direct starting point for planning. Since the product is intended for 15 inch wide and 21 inch wide base drawers, buyers should compare that guidance with actual drawer interior measurements rather than cabinet opening size alone.
Brand consistency can also matter on repeat jobs. Rev-A-Shelf is clearly identified as the manufacturer and the product belongs to the 4WUT Series wood drawer inserts. For trade buyers, that helps with reorder accuracy and matching other inserts in the same series when the project calls for a coordinated interior setup. If you need exact compartment configuration, packaging quantity, or trim limits, confirm those details before ordering because they are not fully stated in the verified product data.
This Rev-A-Shelf wood utility tray is designed for 15 inch wide and 21 inch wide base drawers, but actual fit depends on your drawer interior dimensions.
This trimmable wood utility tray can be trimmed to exact size with a table saw.
This Rev-A-Shelf utensil tray insert is listed at 24 inch W x 22 inch D x 2-7/8 inch H.
This Rev-A-Shelf drawer insert is made of maple hardwood.
This kitchen utensil tray is described as a wood drawer insert designed to drop into base drawers.
This wood utility tray is designed for large cutlery and kitchen utensils.
This standard height tray is 2-7/8 inch high, so drawer inside height should be confirmed before purchase and install.
Packaging is described as sold in each or set, so included quantity should be confirmed before ordering.
This product data does not list hardware, load, or compliance details. Follow manufacturer installation guidance and local building requirements where applicable.
Trimmable wood utility tray is a practical choice when you need a maple insert for large utensils and cutlery in a base drawer. This Rev-A-Shelf 4WUT Series tray is verified as a drop in maple hardwood insert with a listed size of 24 inch W x 22 inch D x 2-7/8 inch H. Before purchase, confirm your drawer interior dimensions, check that the standard height fits your drawer box, and verify whether your order includes one tray or a set.
Sold In: 1 Each