
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rev-A-Shelf maple utensil tray insert is a wood drawer insert made from maple hardwood for organizing large cutlery and kitchen utensils in base drawers. This Rev-A-Shelf drawer insert is designed to drop into 15 inch wide and 21 inch wide base drawers, giving installers and serious DIY buyers a direct way to add a cutlery tray without building a custom organizer from scratch. The standard-height insert measures 18-1/2 inches wide, 22 inches deep, and 2-7/8 inches high. A rev a shelf insert in the 4WUT Series can also be trimmed to exact size with a table saw, which helps when drawer box dimensions vary slightly. Buyers looking for a revashelf large cutlery organizer or kitchen utensil tray can use this maple unit where the drawer size and height match the application.
Key specs to confirm: This maple utensil tray insert is listed at 18-1/2 inches wide, 22 inches deep, and 2-7/8 inches high. Rev-A-Shelf states that the 4WUT Series is designed to drop into 15 inch wide and 21 inch wide base drawers for large cutlery and kitchen utensils. Before purchase, confirm the inside width, inside depth, and usable drawer height of your drawer box, not just the cabinet opening. Because this is a trim-to-fit wood drawer insert, verify whether your application needs field trimming with a table saw. Safety, load, compliance, and any other unlisted technical details should be confirmed with the manufacturer or technical documentation.
What's included: Verified data identifies a Rev-A-Shelf 4WUT Series maple utensil tray insert, model 4WUT-1. Included accessories or mounting hardware are not specified and should be confirmed before ordering.
What to verify before ordering: Check your drawer's inside dimensions, drawer side height, the intended use for large cutlery or kitchen utensils, and whether you want a drop-in fit or plan to trim the wood drawer insert to size. Also confirm the exact contents for each or set packaging if that matters for your order.
Kitchen drawers often become mixed-storage spaces where serving tools, large cutlery, and prep utensils slide together. A maple utensil tray insert addresses that problem by giving the drawer a defined layout instead of leaving contents loose. For a cabinet installer, this matters when finishing a new kitchen or upgrading a drawer interior to match a maple cabinet package. For a serious DIY buyer, it matters when a standard plastic cutlery tray does not use the available depth or does not suit a wood interior.
This Rev-A-Shelf drawer insert is built for base drawer use and is specifically described for large cutlery and kitchen utensils. That makes it a better fit for buyers who need more than a small flatware organizer. The listed dimensions, 18-1/2 inches wide by 22 inches deep by 2-7/8 inches high, give a concrete starting point for checking whether the insert will sit inside the drawer as a drop-in cutlery tray. If the drawer is close but not exact, Rev-A-Shelf states that the insert can be trimmed to exact size with a table saw. That is useful in real cabinet work, where drawer boxes can vary by build method, slide selection, and material thickness.
Use cases include replacing a worn organizer, outfitting a new drawer bank, or adding a wood drawer insert to a remodel where appearance matters as much as storage. Buyers searching for a cutlery divider, kitchen utensil tray, or large cutlery organizer should still confirm internal drawer dimensions before ordering. The product description references fit for 15 inch wide and 21 inch wide base drawers, but the actual drawer box opening and side height must be checked on site. If your project uses a shallow drawer or needs a different tray height, verify the exact model and height option before purchase rather than assuming interchangeability across the series.
When buyers compare drawer organizers in general, the main differences usually come down to material, fit method, and how much field adjustment is possible. This Rev-A-Shelf maple utensil tray insert stands out on verified facts that matter to installers: it is a wood drawer insert, it is made of maple hardwood, it is designed as a drop-in tray, and it can be trimmed with a table saw. Those points support a more cabinet-focused installation process than products that cannot be resized.
The benefit of a wood cutlery tray is straightforward. It can align better with wood cabinetry, and it gives the installer a path to adjust fit when the drawer opening is slightly different from the nominal target. The drop-in format also helps buyers who want organized storage without redesigning the whole drawer interior. Instead of assembling separate dividers, the buyer starts with a single insert sized for a known application.
Consistency also matters. Rev-A-Shelf is clearly identified as the brand, the 4WUT Series identifies the product family, and the intended use is stated for large cutlery and kitchen utensils. That clear product identity helps reduce confusion when matching the tray to a cabinet project. Even so, buyers should avoid assuming that every drawer in a kitchen will accept the same insert. Inside dimensions, usable height, and any trimming requirements should be reviewed for each drawer location. For projects where packaging format matters, confirm whether the order is sold as each or set before finalizing the purchase.
This Rev-A-Shelf cutlery tray is designed for 15 inch wide and 21 inch wide base drawers, but actual fit depends on your drawer's inside width, depth, and usable height.
The Rev-A-Shelf 4WUT-1 drawer insert is listed at 18-1/2 inches wide, 22 inches deep, and 2-7/8 inches high.
The maple utensil tray insert can be trimmed to exact size with a table saw according to the verified product description.
The Rev-A-Shelf wood drawer insert is made from maple hardwood.
The Rev-A-Shelf 4WUT Series is described for use with large cutlery and kitchen utensils in base drawers.
This Rev-A-Shelf drawer insert is designed as a drop-in organizer for compatible base drawers.
Included hardware is not specified in the verified data, so buyers should confirm package contents before ordering.
The cutlery divider should be matched to the drawer's inside dimensions and height, not just the cabinet label. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf maple utensil tray insert gives you a clear, wood-based organizer for large cutlery and kitchen utensils in compatible base drawers. Before ordering, confirm the 18-1/2 inch width, 22 inch depth, and 2-7/8 inch height against your actual drawer interior, and verify whether trimming is needed for your installation. The verified product data identifies the maple tray insert itself, while accessories and packaging details should be confirmed if your project depends on them. A careful fit check helps you choose the right cutlery tray the first time.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RS4WUT-1SH Mfr# 4WUT-1SH | Rev-A-Shelf 4WUT Series 18-1/2"Wx22"Dx2-3/8"H Maple Utensil Tray Insert, -4WUT-1SH | ||||
Sold in: 1 Each | RS4WUT-3 Mfr# 4WUT-3 | Rev-A-Shelf 4WUT Series 24"Wx22"Dx2-7/8"H Maple Utensil Tray Insert, -4WUT-3 | ||||
Sold in: 1 Each | RS4WUT-3SH Mfr# 4WUT-3SH | Rev-A-Shelf 4WUT Series 24"Wx22"Dx2-3/8"H Maple Utensil Tray Insert, -4WUT-3SH |