
Order by 24/7 by web, contact our sales reps or call by phone.

What you need, when you need it, all in one place.

Most orders ship same day.

Advice and support from knowledgeable professionals.
Rev-A-Shelf maple utensil tray insert is a wood drawer insert made of maple hardwood for organizing large cutlery and kitchen utensils in base drawers. This Rev-A-Shelf drawer insert is designed to drop into 15 inch wide and 21 inch wide base drawers, giving buyers a simple way to add a cutlery tray without building a custom divider from scratch. The shallow tray height is 2-3/8 inches, and the listed size is 18-1/2 inches wide by 22 inches deep. The rev a shelf 4WUT Series insert can also be trimmed to exact size with a table saw, which helps installers adapt the fit when drawer dimensions need adjustment. Buyers searching revashelf organization parts or RS4WUT-1SH sizing usually want a wood insert that is straightforward to fit and easy to verify before ordering.
Key specs to confirm: This maple utensil tray insert is listed at 18-1/2 inches wide, 22 inches deep, and 2-3/8 inches high. Rev-A-Shelf states that the 4WUT Series wood drawer inserts are designed to drop into 15 inch wide and 21 inch wide base drawers for large cutlery and kitchen utensils. Because drawers vary by interior width, side construction, and hardware clearance, buyers should measure actual inside drawer dimensions before purchase. If trimming is planned, confirm that your installer can cut maple hardwood accurately with a table saw. Safety, load, compliance, and any installation hardware details are not provided here and should be confirmed with the manufacturer or technical documentation.
What's included: Verified product data identifies a Rev-A-Shelf 4WUT Series maple utensil tray insert. Included accessories or mounting hardware are not specified and should be confirmed before ordering.
What to verify before ordering: Confirm drawer inside width, usable depth, drawer side height, and any interference from slides or drawer box construction. Verify whether you need the shallow 2-3/8 inch height shown here, and confirm whether field trimming is required for your application.
A cutlery divider like this one is useful when a base drawer has enough footprint for utensils but lacks organized sections. In many kitchens, large cutlery and serving tools slide around in open drawers, making access slower and creating wear on drawer interiors. This Rev-A-Shelf maple utensil tray insert addresses that problem with a drop-in wood format designed for base drawers. For installers, that means less fabrication time than building a custom organizer from raw stock. For homeowners or shop buyers, it means the drawer can gain a more structured layout with a product already intended for utensil storage.
The listed application matters. Rev-A-Shelf identifies this drawer insert for 15 inch wide and 21 inch wide base drawers, and the product dimensions are 18-1/2 inches wide by 22 inches deep by 2-3/8 inches high. Those numbers give buyers a starting point, but they do not replace measuring the actual drawer interior. A cabinet opening size and a drawer box interior size are not always the same. Slide type, drawer side thickness, and back clearance can all affect whether the cutlery tray drops in as expected.
The ability to trim the insert to exact size with a table saw is a practical advantage when standard drawer sizes vary slightly from one cabinet line to another. That flexibility can help a shop or installer adapt the maple utensil tray insert to the drawer instead of abandoning the project for a minor size mismatch. Buyers should still confirm how much trimming is appropriate for the intended compartments and whether the final size will preserve the storage layout they want.
This product also fits buyers looking specifically for a rev a shelf or revashelf wood organizer rather than a plastic bin. If the goal is a drawer insert for kitchen utensils, large cutlery, and a cleaner built-in look, the RS4WUT-1SH profile is aimed at that use. If a buyer needs a different tray height, additional included parts, or exact compartment details, those points should be checked against current manufacturer information before purchase.
When comparing a wood cutlery tray to other drawer organizers, the main factors are material, fit method, and how much sizing work is needed at install. This Rev-A-Shelf drawer insert is made of maple hardwood and is designed as a drop-in insert, so the value is in matching the drawer correctly and using a product intended for utensil organization. Buyers who prefer wood interiors often focus on consistent appearance with cabinet components and the option to trim for a closer fit.
Another point to compare is application clarity. The verified product data states that this insert is designed for 15 inch wide and 21 inch wide base drawers and for use with large cutlery and kitchen utensils. That makes the intended use easier to understand than a general-purpose tray with no stated drawer application. The shallow 2-3/8 inch height can also matter when drawer clearance is limited or when a lower tray side is preferred.
For trade buyers, a known brand and a clear product class can reduce ordering mistakes. Rev-A-Shelf Corporation identifies this item as part of the 4WUT Series and classifies it as a drawer insert. That helps when matching replacement plans, quoting jobs, or checking whether a wood insert can be trimmed on site. If your project depends on exact compartment layout, hardware pack contents, or specific installation instructions, compare those details in current manufacturer documentation before finalizing the order.
The Rev-A-Shelf cutlery tray is designed to drop into 15 inch wide and 21 inch wide base drawers, but actual inside drawer measurements should be confirmed before ordering.
The Rev-A-Shelf drawer insert is listed at 18-1/2 inches wide, 22 inches deep, and 2-3/8 inches high.
The maple utensil tray insert can be trimmed to exact size with a table saw according to the verified product description.
The Rev-A-Shelf 4WUT Series insert is designed for large cutlery and kitchen utensils.
The included hardware is not specified in the verified product data, so buyers should confirm included items before ordering.
This cutlery tray is intended for certain 15 inch wide base drawer applications, but fit depends on actual drawer interior dimensions and drawer construction.
The Rev-A-Shelf drawer insert is made of maple hardwood.
The RS4WUT-1SH product listing identifies the shallow 2-3/8 inch height version.
The buyer should measure inside drawer width, usable depth, side height, and any slide or box interference. Follow manufacturer installation guidance and local building requirements where applicable.
Rev-A-Shelf maple utensil tray insert is a practical choice when you need a wood cutlery tray sized for base drawer organization and the option to trim for a closer fit. The verified product data confirms maple hardwood construction, a listed size of 18-1/2 inches by 22 inches by 2-3/8 inches, and use in 15 inch wide and 21 inch wide base drawers for large cutlery and kitchen utensils. Before purchase, confirm actual drawer interior dimensions, included components, and whether field trimming is needed for your installation.
Sold In: 1 Each
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each | RS4WUT-3 Mfr# 4WUT-3 | Rev-A-Shelf 4WUT Series 24"Wx22"Dx2-7/8"H Maple Utensil Tray Insert, -4WUT-3 | ||||
Sold in: 1 Each | RS4WUT-3SH Mfr# 4WUT-3SH | Rev-A-Shelf 4WUT Series 24"Wx22"Dx2-3/8"H Maple Utensil Tray Insert, -4WUT-3SH | ||||
Sold in: 1 Each | RS4WUT-1 Mfr# 4WUT-1 | Rev-A-Shelf 4WUT Series 18-1/2"Wx22"Dx2-7/8"H Maple Utensil Tray Insert, -4WUT-1 |