Choose a Rev-A-Shelf drawer insert

Rev-A-Shelf maple utensil tray insert is a wood drawer insert designed to organize large cutlery and kitchen utensils in base drawers. This Rev-A-Shelf product is made of maple hardwood and is sized at 24 inches wide, 22 inches deep, and 2-3/8 inches high. The shallow profile helps buyers who need a lower-height organizer inside a drawer box. The RS4WUT-3SH model is designed to drop into 15 inch wide and 21 inch wide base drawers, and it can be trimmed to exact size with a table saw. For buyers comparing a cutlery tray, cutlery divider, or other drawer inserts, this maple utensil tray offers a clear fit purpose and a verified material specification.

See how wood drawer inserts help

• Maple hardwood construction - Rev-A-Shelf uses maple hardwood for this utensil tray insert, giving buyers a wood drawer insert that matches many cabinet interiors and shop-built drawer projects.
• 24 inch width - The verified tray width helps buyers check drawer interior space before ordering and reduce fit mistakes during cabinet upgrades.
• 22 inch depth - The stated depth helps installers compare the insert to drawer box depth and plan for front-to-back placement.
• 2-3/8 inch shallow height - The shallow profile suits drawer layouts where vertical clearance matters and where a lower tray height is preferred.
• Designed for 15 inch wide and 21 inch wide base drawers - Rev-A-Shelf identifies the intended drawer applications, helping buyers narrow fit before purchase.
• Drop-in drawer insert design - This product type is built to drop into a drawer, which simplifies installation planning for cabinet shops and serious DIY users.
• Made for large cutlery and kitchen utensils - The tray layout is intended for common kitchen organization needs instead of general loose storage.
• Can be trimmed to exact size with a table saw - The trim-to-fit capability helps installers fine-tune the insert for drawer interiors that vary from nominal cabinet sizing.

Confirm cutlery tray fit before ordering

Key specs to confirm: This cutlery tray is a Rev-A-Shelf maple hardwood drawer insert with a verified size of 24 inches wide, 22 inches deep, and 2-3/8 inches high. It is designed to drop into 15 inch wide and 21 inch wide base drawers and is intended for large cutlery and kitchen utensils. Before ordering, confirm your actual drawer interior width, drawer interior depth, and available inside height. If you plan to trim the insert, confirm that your shop setup and table saw process are appropriate for clean sizing. Safety, load, compliance, and any finish details are not provided here and should be confirmed with the manufacturer or technical documentation.

What's included: Verified data identifies one Rev-A-Shelf 4WUT Series maple utensil tray insert. Packaging may be sold each or set as noted in the product description, so included quantity should be confirmed before ordering.

What to verify before ordering: Check the actual drawer box inside dimensions, confirm that your base drawer application matches the intended 15 inch wide or 21 inch wide drawer use, verify the shallow 2-3/8 inch height works with your drawer contents, and confirm whether trimming will be needed for final fit.

Use a cutlery divider in drawers

Match the cutlery tray to use

Buyers usually choose this product when a standard open drawer is wasting space or allowing kitchen tools to slide together. A cutlery tray helps separate large cutlery and utensils so they are easier to find, easier to put away, and less likely to shift every time the drawer opens. For a cabinet shop, this matters when finishing a kitchen with a cleaner interior layout. For a homeowner or remodeler, it matters when upgrading a drawer without building a custom organizer from scratch.

This Rev-A-Shelf drawer insert is useful when the goal is a wood organizer that drops into a base drawer and still allows some jobsite or shop adjustment. The verified maple hardwood construction gives the product a cabinet-friendly material, while the trim-to-size note is important for installers who work with real drawer measurements rather than nominal sizes. A maple utensil tray can be especially helpful when drawer interiors vary slightly due to box construction, slides, or face-frame conditions. If trimming is planned, buyers should confirm the final drawer opening and interior dimensions first.

The shallow 2-3/8 inch height is another practical detail. Some buyers need a lower-profile organizer because tall inserts can interfere with drawer contents or available inside clearance. This RS4WUT-3SH model gives a verified shallow option within the 4WUT Series. Buyers comparing RS4WUT-3SH to other drawer inserts should focus on actual width, depth, and height, then match those numbers to the usable inside dimensions of the drawer box.

The intended application also matters. Rev-A-Shelf states that this wood drawer insert is designed to drop into 15 inch wide and 21 inch wide base drawers. That gives buyers a starting point, but the safest approach is still to measure the actual drawer interior before purchase. If your drawer uses unusual construction, has interior hardware that reduces space, or needs a specific compartment layout, those details should be checked against the insert dimensions and the manufacturer's technical information.

Compare wood drawer inserts with confidence

When buyers compare wood drawer inserts, the most useful differences are often material, stated dimensions, install style, and whether the insert can be adjusted for fit. This Rev-A-Shelf cutlery divider stands out in practical terms because the verified data clearly identifies maple hardwood construction, a drop-in format, and trim-to-fit capability with a table saw. Those facts help buyers make a grounded comparison without relying on assumptions.

Another useful comparison point is application clarity. Some drawer inserts are sold as general organizers, while this product is specifically described for large cutlery and kitchen utensils. That makes it easier to judge whether the tray matches the drawer's purpose. Buyers who want a dedicated kitchen organizer can use that verified use case to narrow options quickly.

Brand consistency also matters when ordering cabinet accessories. Rev-A-Shelf is the stated brand for this drawer insert, and the 4WUT Series naming helps buyers align this tray with related series options when reviewing shallow versus standard height versions. This page covers the shallow 2-3/8 inch model only, so anyone needing a different height should confirm the exact series option before placing an order.

For installers and serious DIY buyers, the main advantage of choosing a clearly specified cutlery tray is fewer surprises at install time. A verified 24 inch width, 22 inch depth, and shallow height provide a solid starting point for planning. The final step is simple but important: measure the drawer interior, confirm the intended base drawer application, and verify whether trimming is required for the finished fit.

Ask fit questions before drawer install

Order a Rev-A-Shelf drawer insert

Rev-A-Shelf drawer insert is a practical choice for buyers who want a maple hardwood cutlery tray sized for base drawer organization. Verified details for this model include 24 inch width, 22 inch depth, 2-3/8 inch height, drop-in installation, and trim-to-fit capability with a table saw. Before purchase, confirm the actual drawer interior dimensions, make sure the intended drawer application matches your cabinet, and verify included quantity if you are ordering for a multi-drawer project.