Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
Right Pull 320mm CC Soft Gold identifies this R. Christensen by Berenson handle as a long cabinet pull with a 320 mm center to center drilling, which helps installers line up with wide drawer or door layouts on larger casework runs. The pull belongs to the Right Series, tying it to a consistent style family for projects that repeat the same visual across multiple fronts. Its zinc construction forms a solid metal body, supporting regular cabinet use in kitchens, baths, or built-ins where doors and drawers see frequent operation. The soft gold finish defines the visual tone, giving a warm metallic look that coordinates with other soft gold decorative hardware on the job. A total length of 14-1/16 inches gives this handle a strong linear presence on wider fronts. A projection of 1-3/32 inches sets the standoff from the face, providing finger clearance for gripping and pulling. The 19/32 inch width establishes the front profile, affecting how the pull reads against narrow or wide rail dimensions.
The 320 mm center to center measurement on this R. Christensen by Berenson Right Series pull identifies the drilling layout, guiding shop setups for boring jigs or CNC programs on cabinet fronts. With an overall length of 14-1/16 inches, the handle extends past the hole spread, allowing fabricators to position the drilling pattern while still centering the pull visually on wider faces. A projection of 1-3/32 inches establishes how far the handle stands off from the door or drawer, influencing clearance over edge profiles and nearby adjacent fronts. The 19/32 inch width defines how much rail surface the pull covers, which matters when working near narrow stile dimensions or inset edge details. Its zinc construction provides a rigid base for mounting, supporting repeatable alignment when multiple pulls from the Right Series are installed across a cabinet run.
This R. Christensen by Berenson Right Series 12-5/8 inch (320 mm center to center) soft gold pull works on cabinet doors and drawers that match its drilling pattern, supporting projects that call for a long linear handle. The 320 mm center to center dimension aligns with wider fronts, so installers can span broad drawer faces or tall doors using a single pull instead of multiple smaller handles. With a total length of 14-1/16 inches, the pull visually anchors larger panels, which can help balance tall pantry doors or oversized drawers in kitchens or other built-in installations. The soft gold finish delivers a defined warm metallic tone, letting designers coordinate it with soft gold decorative hardware from the same space for a unified visual field across upper and lower cabinets. Zinc construction under the finish creates a metal structure suited to regular opening and closing cycles on working cabinetry.
The defined 320 mm center to center on this Right Series pull from R. Christensen by Berenson gives fabricators a fixed boring dimension, supporting template-based or CNC-based drilling programs across multiple cabinet fronts. Its overall length of 14-1/16 inches provides a known offset from the mounting holes to the ends, which helps drafters and installers calculate exact set-backs from door edges or drawer sides for repeatable visual alignment. The 1-3/32 inch projection sets the pull out from the cabinet face by a measured distance, shaping how fingers engage the grip when fronts are flush or slightly proud of surrounding panels. A 19/32 inch width defines the face contact area, useful when aligning the pull along narrow rails while keeping enough surface beneath for stable mounting. The soft gold finish and Right Series styling tie the 6066-1SFG-C part number to a specific look, which supports consistent hardware selection across phases of a project ordered through Wurth Baer Supply.
The Right Pull 320mm CC Soft Gold uses a 320 mm center to center drilling, which sets the hole spacing pattern for cabinet doors and drawers that will carry this handle.
The R. Christensen by Berenson 6066-1SFG-C pull has a total length of 14-1/16 inches, which suits wider cabinet doors or drawers that benefit from a longer gripping surface.
The pull has a projection of 1-3/32 inches, so it stands off the cabinet face by that distance, giving hand clearance when opening doors or drawers.
The Right Series soft gold handle has a width of 19/32 inches, which creates a slim profile suitable for use on both narrow rails and broader cabinet fronts.
The 320 mm center to center pull is made from zinc, providing a metal base that supports the applied soft gold finish during everyday cabinet operation.
This soft gold pull is from R. Christensen by Berenson and belongs to the Right Series collection, aligning it with matching decorative hardware designs.
The Right Pull 320mm CC Soft Gold pairs a defined 320 mm center to center drilling with a 14-1/16 inch overall length, giving installers a long cabinet handle suited to wide doors and drawers. Its zinc construction and soft gold finish join metal structure with a warm metallic color, supporting both everyday cabinet use and coordinated appearance. With a 1-3/32 inch projection and 19/32 inch width, the pull creates a slim, usable grip profile across varied front sizes. For projects built around the R. Christensen by Berenson Right Series look, this 6066-1SFG-C model from Wurth Baer Supply provides a consistent soft gold option sized for larger fronts.
Sold In: 1 Each
