Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
128mm C/C pull white finish describes a zinc cabinet handle with a 128 mm center to center mounting, giving installers a clear drilling layout for consistent hardware alignment on doors and drawers. The 6-1/2 inch overall length provides a comfortable hand grip area that works well on many cabinet sizes while still leaving room for edge clearances. A 1-3/32 inch projection sets the pull off the face of the cabinet so fingers can wrap behind it easily during use. The 19/32 inch width creates a slim front profile that sits cleanly on narrow rails or stile frames. The white finish offers a neutral look that blends with light-colored cabinetry and casework. Being part of the Right Collection from R. Christensen by Berenson identifies the design family, which matters when matching existing hardware across a project.
The 128 mm center to center mounting distance defines the hole spacing for this R. Christensen by Berenson pull, giving a fixed layout dimension for new cabinet builds or for changing hardware on existing fronts. With a 6-1/2 inch overall length, the pull extends past the mounting holes at both ends, which helps visually balance the hardware on doors and drawers. The 1-3/32 inch projection sets the handle out from the face, allowing the hand to pull straight without scraping across the cabinet surface. A 19/32 inch width keeps the footprint narrow so it can sit on slimmer drawer rails without crowding surrounding details. Together, these dimensions provide a clear picture of how the pull will sit, feel, and line up on typical cabinet installations.
This R. Christensen by Berenson Right Series 5-1/16 inch (128 mm) center to center white pull is suited to cabinet doors and drawer fronts that match the 128 mm drilling pattern, giving installers a straightforward swap when using that layout. The 6-1/2 inch overall length helps the pull look proportional on kitchen, bath, or storage cabinets that have medium-width rails or stiles, so the hardware does not appear undersized. Because the projection is 1-3/32 inch from the surface, the pull stands off the cabinet enough to grip comfortably even on thicker door profiles. The 19/32 inch width keeps the handle streamlined, which helps when installing multiple pulls on narrow drawer stacks where front space is limited. As part of the Right Collection, the pull can be used whenever a consistent style is desired on several cabinet groupings within the same project.
The 128 mm center to center dimension on this 6070-1048-C cabinet pull sets a repeatable hole spacing, which is useful for jigs and templates that speed up drilling and layout on job sites or in the shop. The 5-1/16 inch center to center measure, expressed in inches, matches the same spacing for crews working in imperial units, helping avoid conversion errors during layout. With a 6-1/2 inch total length, installers know exactly how far the pull will extend past the mounting holes, which helps with clearances to adjacent doors, walls, or trim. The 1-3/32 inch projection provides enough stand-off to clear raised panels or decorative edge profiles, supporting a consistent feel across different cabinet designs. Combining zinc construction with a white finish gives a solid metal component that visually blends into light cabinetry while maintaining a defined hand-hold edge.
The pull has a 128 mm center to center measurement, which defines the distance between mounting holes and helps align drilling and replacement on cabinet doors and drawers.
The pull has a 6-1/2 inch overall length, so it reaches beyond the mounting holes and gives a full hand grip span on medium and larger cabinet fronts.
The pull projects 1-3/32 inch from the cabinet surface, providing finger clearance behind the handle for a comfortable grip in everyday opening and closing.
The pull is 19/32 inch wide, giving a slim profile that works well on narrow rails and smaller drawer fronts while still offering an easy hand hold.
The pull is made from zinc, providing a metal construction that supports a solid feel and stable mounting on cabinet doors and drawer fronts.
The 6070-1048-C pull has a white finish, which coordinates with white and light-toned cabinetry for a consistent appearance across a run of cabinets.
This R. Christensen by Berenson Right Series 6070-1048-C cabinet pull combines a 128 mm center to center layout with a 6-1/2 inch overall length, giving a clear drilling pattern and balanced appearance. The zinc construction with a white finish provides a neutral, metal handle suited to cabinets using 128 mm spacing. The 1-3/32 inch projection and 19/32 inch width define how it will feel in hand and sit on the door or drawer face. For projects built around 128 mm hardware layouts, this pull offers a defined size and color option within the Right Collection.
Sold In: 1 Each
