Amerock Concentric Finger Pull For Cabinet Projects

Amerock Concentric finger pull gives cabinets a compact pull point using a 1-1/4 inch (32 mm) center-to-center layout, which creates a predictable drilling pattern when laying out doors and drawers in a run. The Concentric collection design combines smooth curves and sharp lines, which forms a distinct finger grip while adding visual depth on flat faces. Matte black finish provides a dark, uniform appearance that helps this pull read cleanly across painted or stained surfaces. Zinc material construction creates a solid metal body, giving a consistent feel when opening heavier cabinet doors or drawers. The pull length of 1-11/16 inch and width of 1 inch keep the footprint tight, allowing use on narrower rails or modern slab fronts where space is limited.

Key Concentric Finger Pull Details For Planning

• The 1-1/4 inch (32 mm) center-to-center dimension sets the screw hole spacing, which simplifies jig setup and keeps hole locations consistent across multiple cabinet fronts.
• The 1-11/16 inch overall length keeps the pull compact, which helps fit tight drawer fronts or narrow stile areas without crowding adjacent hardware or edge profiles.
• The 1 inch width controls how far the pull spans across the face, which supports clean alignment with rail heights and narrow face frame members.
• The 7/8 inch projection defines how far the pull stands off the surface, giving fingers enough clearance while keeping the profile low for a streamlined look.
• The 5/16 inch by 1 inch base dimensions define the footprint at the contact point, which helps when positioning the pull relative to panel edges, glass lites, or detailing.
• The matte black finish delivers a dark, even surface, which works well when matching other matte black cabinet hardware in the same space.

Installation And Fit Details For This Finger Pull

This Concentric finger pull uses a 1-1/4 inch (32 mm) center-to-center screw pattern, so drilling two straight 32 mm-spaced holes sets the pull in the correct position. The pull mounts through the cabinet face using 8-32 x 1 inch screws, which allows threading directly into the zinc body for a tight fit. The 7/8 inch projection and 1 inch width balance hand clearance with a compact footprint, which supports mounting on both doors and drawers without interference at typical cabinet reveals. The 5/16 inch by 1 inch base dimensions give a clear reference when aligning the pull parallel to door edges or drawer tops for consistent sight lines.

How This Concentric Finger Pull Works In Use

Where The Concentric Finger Pull Is Typically Used

The Concentric series finger pull from Amerock Corporation is sized and styled for cabinet applications in residential or commercial woodworking projects using standard handles and pulls. Its 1-1/4 inch (32 mm) center-to-center layout matches common small-pull spacing, which fits well on bathroom vanities, accent doors, or smaller drawers that do not suit longer bar pulls. The matte black finish coordinates with other matte black decorative hardware, helping designers carry a single finish across hinges, larger pulls, and knobs. With a 1-11/16 inch length and 1 inch width, this pull works where rail height or drawer front size limits available real estate, such as narrow kitchen spice drawers or upper cabinet doors.

The 7/8 inch projection supports a fingertip grip without the pull standing excessively proud of the cabinet face, which is valuable on tight walkways or galley layouts where hardware clearance affects movement. Zinc construction gives the pull a metal feel appropriate for frequently used doors and drawers, supporting daily operation in kitchens, baths, and built-ins. The defined combination of smooth curves and sharp lines in the Concentric collection adds a controlled decorative element, which complements flat panel, slab, or Shaker-inspired cabinetry without overpowering the door style.

Why The Verified Details Support Consistent Results

The 32 mm center-to-center measurement provides an exact drilling dimension, which helps installers repeat the same hole pattern across multiple fronts and align this pull with other 32 mm-based hardware. Using 8-32 x 1 inch screws to mount through the door or drawer face into the zinc pull body gives a secure attachment, which supports long-term use on frequently opened cabinets. The 5/16 inch base length and 1 inch base width define the contact area, making it easier to register the pull to layout lines and maintain equal setbacks from edges.

The 7/8 inch projection controls hand clearance, which reduces the chance of fingers rubbing the door surface while still staying close enough to minimize snag points on passing clothing. The matte black finish offers a uniform color field, which supports visual consistency when multiple pulls are installed in a grid across banks of drawers or tall cabinet runs. Because the pull length, width, and projection are all defined, designers and installers can plan spacing between adjacent pulls accurately and coordinate this Concentric finger pull with other Amerock decorative hardware pieces on the same project.

Common Questions About This Concentric Finger Pull

Select This Pull For Defined 32 mm Cabinet Layouts

The Amerock Concentric finger pull BP36811MB combines a 1-1/4 inch (32 mm) center-to-center layout, 7/8 inch projection, and matte black finish, making it a practical choice wherever a compact, zinc cabinet pull with clearly defined dimensions supports your cabinet hardware plan.