Hickory Hardware American Diner Pull For Cabinets

Hickory Hardware American Diner pull brings a classic 50s-inspired profile with a modern twist to cabinet doors and drawers, so it suits projects where a clean, transitional look is required. This Belwith Keeler pull belongs to the American Diner series, tying multiple openings together with one consistent design language. The brushed golden brass finish establishes a warm metallic tone that supports kitchen or bath layouts calling for coordinated brass details. A 3-3/4 inch (96 mm) center to center dimension sets hole spacing, which helps align this pull with standard drilling patterns on many cabinetry runs. Overall length of 5 inches visually balances wider drawer fronts so the hardware feels proportional to the face. A 7/8 inch width gives the grip a substantial feel, which helps frequent-use locations like primary kitchen banks. A projection of 1-1/16 inches provides hand clearance for pulling doors and drawers comfortably.

Key Details Of This Brushed Golden Brass Pull

• The 3-3/4 inch (96 mm) center to center measurement defines fixed hole spacing, which helps layout and drilling stay consistent across multiple doors and drawers during an installation.
• The 5 inch overall length stretches visually across the face of the cabinet, which supports a balanced look on drawer fronts and keeps the pull from appearing undersized on wider openings.
• The 1-1/16 inch projection brings the grip forward from the surface, which creates finger space that aids users when opening heavier drawers or tightly fitted doors.
• The 7/8 inch width establishes the front profile of the pull, which affects how substantial the hardware appears and how it feels in the hand during everyday operation.
• The brushed golden brass finish sets the color and sheen of the pull, which helps designers align this piece with hinges, faucets, and lighting using similar brass tones.

Cabinet Pull Sizing And Hole Spacing Details

The 96 mm center to center hole spacing on this cabinet pull sets the exact distance between mounting points, which influences how jigs are set when drilling new fronts. Working with the stated 3-3/4 inch center to center value allows repeatable alignment across a run of doors, supporting straight visual lines from one cabinet to the next. The 5 inch overall length defines where the ends of the pull land on a rail or stile, so installers can visualize clearances relative to adjacent hardware. With a 1-1/16 inch projection, the pull stands off the face enough to give clearance between the users knuckles and the cabinet surface, which is useful on thicker door edges. The 7/8 inch width determines how much hardware face shows on narrow rails, which can guide placement choices on smaller drawer fronts.

Using This 96 mm Center To Center Pull

Where This Brushed Golden Brass Handle Fits

This 96 mm center to center cabinet pull works on doors and drawers that accept a 3-3/4 inch drilling pattern, so it fits layouts planned around that common spacing. In a kitchen, the 5 inch length and 7/8 inch width help the pull read correctly on base cabinets and wall units, keeping hardware size in proportion to standard face frames. The brushed golden brass finish ties into designs that call for brass-toned decorative hardware and moldings, allowing this piece to coordinate with other Belwith handles and pulls in the same color family. In bathrooms, the American Diner series styling gives vanities a consistent, transitional look that bridges traditional cabinet shapes and more modern surfaces. Across an entire project, repeating this pull on every door and drawer creates a unified line of sight along the cabinetry, which supports clean visual alignment.

Why These Dimensions Support Repeatable Results

The 3-3/4 inch (96 mm) center to center dimension on the Belwith Keeler P2141-BGB pull establishes a fixed reference for drilling templates, which helps installers repeat the same layout on multiple faces without recalculating hole positions. Because the projection is exactly 1-1/16 inches, door and drawer fronts open with stable hand clearance, which reduces interference between the users fingers and adjacent trim surfaces. The 5 inch length offers a clear target for users to grab, which benefits drawers carrying heavier loads that are opened and closed frequently. A 7/8 inch width makes the grip feel defined without overwhelming narrow rails, which helps maintain the intended American Diner series profile on both small and large fronts. The brushed golden brass finish provides a uniform surface appearance, which supports designers who want hardware color to remain consistent as more pulls are added across a room.

Common Questions About The American Diner Pull

Selecting This Pull For Your Next Cabinet Run

The Hickory Hardware American Diner pull with 3-3/4 inch (96 mm) center to center sizing gives projects a defined drilling reference, while the 5 inch overall length and 1-1/16 inch projection set the hand-feel on every opening. The 7/8 inch width and brushed golden brass finish establish both the visual weight and color tone across doors and drawers. For cabinet work that calls for an American Diner series profile from Belwith Keeler, this brushed golden brass pull offers the stated dimensions needed to plan hole spacing and layout.