Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
PULL, 96MM C/C, MATTE BLACK describes a pull sized for 96 mm center to center mounting, so hole spacing lines up cleanly on cabinet doors or drawers built around this common dimension. The 3-3/4 inch center to center measurement also suits installers working in imperial layouts, since it translates directly on standard cabinet fronts. The overall 5 inch length gives enough grip area for comfortable hand clearance during everyday opening and closing. A projection of 1-1/16 inch spaces the hand away from the cabinet face, which supports smooth use without fingers rubbing the surface. The 7/8 inch width provides a compact front profile, so the pull reads visually balanced on both narrow and wider fronts. The American Diner era pull styling gives the room a classic 50s vibe with a modern twist, which helps tie together transitional kitchens or baths. The matte black finish keeps reflections down, supporting a clean, understated look on installed runs.
The 96 mm center to center dimension defines the distance between mounting holes, so existing fronts drilled on this pattern accept the pull without redrilling. The matching 3-3/4 inch center to center reference lets installers work confidently in imperial or metric, since both measurements describe the same hole spacing. With a projection of 1-1/16 inch, the pull stands far enough off the surface to clear door edge profiles and typical overhangs during operation. The 5 inch length spreads the grip area beyond the hole spacing, which helps distribute hand contact and keeps stress centered over the mounting points. A 7/8 inch width keeps the footprint narrow, offering flexibility when positioning on stile-and-rail doors or slimmer drawer fronts. The matte black finish supports a consistent look from handle to handle, which is important when aligning multiple pulls in straight visual lines.
The American Diner era pull is described as giving any room a classic 50s vibe with a modern twist, so it suits kitchens or baths aiming for transitional styling. The 3-3/4 inch (96 mm) center to center layout matches many cabinet drilling standards, which works well across new installations and straightforward replacements on existing faces using that spacing. With a 5 inch length, the pull scales comfortably on standard base and wall cabinet doors, avoiding a too-small look on full-height fronts. The 7/8 inch width keeps the handle visually light, which fits banks of drawers where multiple pulls sit close together. The matte black finish supports dark cabinet colors and also contrasts against lighter painted or stained surfaces, helping the pull read as a defined hardware line in the finished room.
The defined 96 mm center to center spacing supports repeatable layouts, since installers can set drilling jigs around that fixed distance for rows of doors and drawers. The dual reference of 3-3/4 inch center to center and 96 mm center to center reduces conversion steps on site, streamlining measurement whether plans are metric or imperial. A projection of 1-1/16 inch gives enough stand-off for a full grip, which helps when users open heavier loaded drawers or tall pantry doors. The 5 inch overall length provides leverage beyond the mounting points, distributing pull forces along the handle and supporting smooth operation over time. The 7/8 inch width keeps the pull profile compact, allowing tight side-by-side placements on smaller drawer faces. The matte black finish maintains a uniform appearance across multiple pulls, helping long runs of cabinets look coordinated from one end of the room to the other.
The P2141-MB matte black pull uses a 3-3/4 inch (96 mm) center to center spacing, so it aligns with standard 96 mm drilling patterns on many cabinet doors and drawers.
The American Diner series 96 mm pull is 5 inches long, which gives a comfortably sized grip and a proportion that suits a wide range of cabinet door and drawer widths.
The pull has a projection of 1-1/16 inch, standing it off the cabinet face to provide finger clearance that supports easy use on doors and drawers.
The Belwith Keeler cabinet pull P2141-MB is 7/8 inch wide, giving a slim profile that works well when several pulls are lined up across drawer banks.
The American Diner era pull creates a classic 50s vibe with a modern twist, supporting transitional kitchen or bath designs that blend traditional and contemporary elements.
The matte black finish provides a dark, low-reflective surface, helping the pull coordinate with other black decorative hardware and creating a consistent visual line on cabinet fronts.
The PULL, 96MM C/C, MATTE BLACK design from the American Diner series pairs a 3-3/4 inch center to center layout with a 5 inch length, fitting standard cabinet drilling while maintaining comfortable grip size. The 1-1/16 inch projection and 7/8 inch width support both hand clearance and a slim visual profile, useful across doors and drawers. With its matte black finish and classic 50s vibe, this Belwith Keeler pull suits transitional kitchen and bath projects built around 96 mm spacing. Choose it when a consistent, matte black hardware line is required across multiple cabinet fronts.
Quantity | Unit Price | Catalog | ||||
|---|---|---|---|---|---|---|
Sold in: 1 Each |  BWP2141-BGB Mfr# P2141-BGB | Hickory Hardware American Diner Pull 3-3/4" (96 mm) Center to Center, Brushed Golden Brass, P2141-BGB |
Sold In: 1 Each