Olympus Disc Tumbler Cam Lock, 15/16" Cylinder Keyed Alike C346A Bright Nickel 954-14A-C346A

Olympus Disc Tumbler Cam Lock For Drawers And Doors

Olympus disc tumbler cam lock is a cam lock from Olympus Lock, Inc. with a 15/16 inch cylinder that secures drawers and right-hand or left-hand doors using a 90 degree cam turn, giving straightforward locked and unlocked positions for cabinet work. The bright nickel finish creates a clean metal surface, which suits visible cabinet locations where hardware appearance matters alongside function. The lock is keyed alike to the C346A keying, so multiple locks with this code can share the same keying arrangement across a project. The lock comes assembled with the cylinder and body connected via a patented retainer staple, so the working core is already fixed into the cam lock body when you receive it. Keys are not required for assembly of the cylinder and body, which means the lock body can be prepared in the shop without bringing key sets to the bench.

Cam Lock Details That Support Cabinet Projects

• Passed ANSI/BHMA Grade 2 cycle test at 20,000 cycles including key insertion and removal, so the internal disc tumbler mechanism is tested for repeated daily operation in typical cabinet use where locks are opened frequently.
• The spur washer with eyelet is designed so that when it is screwed into place it prevents lock rotation and keeps the fixing nut from loosening after installation, helping the cam stay aligned with the strike over time.
• The revolutionary cylinder and cylinder extender system allows cylinders to be swapped between different size cam lock bodies, giving options to standardize on one keying setup while using different body lengths across cabinets.
• The lock is suited for drawers, right-hand doors, and left-hand doors, allowing one cam lock style to serve different door swings and drawer fronts in the same run of casework.
• It works for lipped or overlay construction with a 1-1/2 inch straight cam and for flush construction with a 1-1/8 inch extension, 11/32 inch offset cam, so the same product addresses common face frame and flush styles.

Cam Lock Fit, Cylinder Length, And Installation Use

The manufacturer notes that for overlay applications the combined thickness of the front and frame cannot exceed the cylinder length listed, so the 15/16 inch cylinder length sets the practical maximum material stack at the lock location. This constraint helps layout work because door or drawer thickness and frame build-up can be planned around the cylinder length, avoiding a situation where the cam threads do not project far enough for the fixing nut. The 90 degree cam turn means the installer can align cams to a simple quarter-turn motion, which is familiar in cabinet locking and makes strike plate layout more predictable across multiple doors or drawers on the same bank.

Where This Olympus Cam Lock Works Best

Using The Cam Lock On Drawers And Doors

This Olympus cam lock is specified for drawers along with right-hand and left-hand doors, which means it can be applied on vertical and horizontal faces throughout a cabinet line. In drawer applications the 90 degree cam turn allows the cam to swing behind the cabinet front or into a strike, making it practical for both file and utility drawers that need key control. On doors, the combination of use with right-hand or left-hand doors means hinges on either side of the opening can be accommodated without changing the core lock style, which benefits projects where hardware uniformity is preferred. The suitability for lipped or overlay construction using a 1-1/2 inch straight cam covers scenarios where the door overlays the frame, so the cam reaches behind the lip to hold the door closed. For flush construction, the 1-1/8 inch extension with 11/32 inch offset cam is intended to bring the cam into proper contact with the frame or strike when the door or drawer front sits even with the frame.

Details That Support Keying, Swaps, And Long-Term Use

The keyed alike C346A configuration means locks with this code are set up to operate with the same key pattern, simplifying key management where multiple cabinets share access requirements. The revolutionary cylinder and cylinder extender combination allows the same cylinder to be moved between different size cam lock bodies, a feature that supports inventory management by letting one keying system work across various cabinet depths and material thicknesses. The cylinder and body are assembled using the patented retainer staple, which holds the core properly seated in the body and streamlines preparation time when locks are being staged for installation on a large job. Passing the ANSI/BHMA Grade 2 cycle test at 20,000 cycles that include key insertion and removal indicates the mechanism has been tested under repeated operation, supporting use in settings where drawers and doors are locked and unlocked often. The note that keys are not required for assembly of the cylinder and body further supports shop workflow, because the hardware can be mounted or prepped without coordinating key sets at that step, reducing handling during production.

Common Questions About Olympus Disc Tumbler Cam Lock

Select This Cam Lock For Tested Cabinet Security

The Olympus disc tumbler cam lock 954-14A-C346A pairs a 15/16 inch cylinder with a 90 degree cam turn, so it meets common cabinet lock layouts for drawers and doors. With ANSI/BHMA Grade 2 cycle testing and keyed alike C346A keying, it supports multi-opening projects where repeatable operation and shared key patterns matter. The ability to use the lock on lipped or overlay and flush construction with specified cams helps it serve varied cabinet styles within one job. Choose this Olympus cam lock when a bright nickel finish and coordinated keying are needed across drawers and doors.