Olympus Disc Tumbler Cam Lock For Cabinets

Olympus disc tumbler cam lock brings a keyed alike C452A cylinder in a bright nickel finish, giving installers a consistent key system and a clean look across matching drawers and doors. The lock is shipped with cylinder and body assembled via a patented retainer staple, so the core is already seated in the housing, which saves bench time during layout. This design passed the ANSI/BHMA Grade 2 cycle test for 20,000 cycles, covering both key insertion and removal, so the mechanism is engineered to handle repeated daily use in typical cabinet environments. A 90 degree cam turn delivers a simple quarter-turn action from unlocked to locked, which keeps operation predictable in the field. For drawers and right-hand or left-hand doors, this single cam lock format supports a range of common cabinet configurations.

Key Olympus Cam Lock Details That Matter On Site

• The bright nickel finish on this Olympus Lock, Inc. cam lock presents a neutral metallic appearance that pairs with a wide range of cabinet hardware, helping installations blend visually in offices, shops, or storage areas.
• The keyed alike C452A setup allows multiple locks to share the same key pattern, which simplifies key management in projects where users need one key to operate several drawers or doors.
• The spur washer with eyelet is designed so that, when screwed into place, it prevents lock rotation and helps keep the fixing nut from loosening, which supports long-term alignment of the cam to the strike point.
• The revolutionary cylinder and cylinder extender system allows cylinders to be swapped between different size cam lock bodies, which increases inventory flexibility for shops that stock multiple body lengths with shared keying.
• The 90 degree cam turn uses a straightforward quarter-turn motion, making it easy for end users to understand lock status while also giving installers a consistent throw angle to work around during layout.

Cam Lock Fit, Drawer And Door Construction Details

This Olympus disc tumbler cam lock is specified with a 15/16 inch cylinder, so the cylinder length sets the workable combined thickness of the front and frame in overlay applications. For overlay construction, the combined thickness of the front and frame cannot exceed the cylinder length listed, which guides material choices at design time. The SAP description notes a 5/8 max reference, aligning this lock to cabinet work where material build-up remains within that constraint. Lipped or overlay construction is handled using the 1-1/2 inch straight cam, giving reach over a face frame on doors or drawers. Flush construction is handled with the 1-1/8 inch extension, 11/32 inch offset cam, positioning the cam correctly behind a flat front.

Using This Cam Lock In Real Cabinet Work

Where This Olympus Cam Lock Fits Best

This cam lock is intended for drawers and both right-hand and left-hand doors, so it can be deployed across a full cabinet run without swapping models for different swings. Lipped or overlay construction with the 1-1/2 inch straight cam suits situations where the door or drawer front overlays a face frame, because the straight cam reaches past the lip to capture behind the frame. Flush construction with the 1-1/8 inch extension, 11/32 inch offset cam supports frameless or flush-front casework, with the offset tailored to land on a strike surface behind a flat panel. In overlay setups, the combined thickness of front and frame must stay within the listed cylinder length, which keeps the cam within its designed throw range. The bright nickel finish provides a clean, neutral appearance that works well on office furniture, storage cabinets, and shop fixtures where hardware needs to look consistent.

How Design Details Support Repeatable Installations

The lock is shipped with the cylinder and body assembled via a patented retainer staple, which means the core and housing arrive already connected, reducing assembly steps during production runs. Because keys are not required for assembly, installers can mount the lock body in the cabinet without coordinating keys during the build, helping streamline workflow in the shop. The spur washer with eyelet, when screwed into place, is designed to stop the lock from rotating and to keep the fixing nut from loosening, which helps the cam stay aligned with its strike even after repeated operation. The ANSI/BHMA Grade 2 cycle test rating, with 20,000 cycles including key insertion and removal, indicates that the internal disc tumbler mechanism is built to handle frequent locking and unlocking in normal cabinet service. The keyed alike C452A format supports keyed systems where multiple locks share one key, which is useful for offices or facilities wanting simple access control. For custom keying needs, the product description notes that custom keying typically ships direct from the manufacturer in 48-72 hours, giving shops an option for project-specific key plans on tighter schedules.

Common Questions About Olympus Disc Tumbler Cam Lock

Select This Cam Lock For Keyed Cabinet Runs

The Olympus disc tumbler cam lock with 15/16 inch cylinder, bright nickel finish, and keyed alike C452A system offers a practical way to standardize locking across drawers and doors. With cams provided for lipped/overlay and flush construction, plus a 90 degree cam turn, this lock supports straightforward layouts in cabinet shops and on installations. Use its ANSI/BHMA Grade 2 cycle-tested performance and patented retainer staple assembly to streamline repetitive jobs where consistent operation and keying patterns matter.