Olympus Disc Tumbler Cam Lock, 15/16" Cylinder Keyed Alike C413A Matte Black 954-US19-C413A

Olympus Disc Tumbler Cam Lock For Cabinet Security

Olympus disc tumbler cam lock gives drawers and cabinet doors a keyed control point using a 15/16 inch cylinder keyed alike C413A, which standardizes operation across multiple locations and simplifies key handling on the job. The lock is part of the Olympus Lock, Inc. cam lock line, so it fits directly into projects that call for this specific class and manufacturer part number. The lock comes assembled with the cylinder and body joined by a patented retainer staple, which eliminates loose components during handling and helps streamline bench work. Passed ANSI/BHMA Grade 2 cycle test at 20,000 cycles including key insertion and removal, it is proven to operate through repeated daily use without binding that could slow service calls. Keys are not required for assembly because of the pre-assembled cylinder and body, which lets installers position and secure the lock without managing the keys during fabrication or retrofit work.

Cam Lock Details That Support Daily Use

• The matte black finish on this Olympus cam lock presents a consistent dark appearance that blends with black fixtures, which helps it match contemporary cabinet and fixture designs in visible locations.
• The patented retainer staple connection between cylinder and body holds the components together during handling, which reduces dropped parts and speeds layout when working on multiple cabinet openings.
• Passing the ANSI/BHMA Grade 2 cycle test at 20,000 cycles with key insertion and removal verifies sustained operation under frequent use, which matters for cabinets in commercial or high-traffic environments.
• The 90 degree cam turn delivers a quarter-turn lock and unlock motion, which provides predictable handle feel and straightforward alignment with strikes or keeper surfaces during setup.
• Key removable in both locked and unlocked positions allows the key to be taken out after either operation, which supports workflows where multiple openings are serviced in sequence without returning to neutral.
• The spur washer with eyelet is designed so that when it is screwed into place it prevents lock rotation and keeps the fixing nut from loosening, which helps the lock stay oriented correctly over time.

Installation And Construction Fit Details

This disc tumbler cam lock is intended for drawers and for right-hand or left-hand doors, which lets one part number cover multiple orientations across a run of cabinets. It supports lipped or overlay construction using a 1-1/2 inch straight cam, so it can be laid out on doors that sit over a face frame while maintaining a reliable cam reach. It also supports flush construction using a cam with 1-1/8 inch extension and 11/32 inch offset, giving an option for doors that sit even with the frame. For overlay applications, the combined thickness of the front and frame cannot exceed the cylinder length listed for the lock, which keeps the key side hardware within the working range so the cam can rotate freely. Custom keying typically ships direct from the manufacturer in 48-72 hours, which provides a defined time frame when projects require specific keying patterns beyond standard keyed alike C413A.

How This Olympus Cam Lock Works In Practice

Using The Cam Lock On Drawers And Doors

The Olympus disc tumbler cam lock is specified for drawers along with right-hand and left-hand doors, so one lock type can be applied across mixed cabinet layouts without changing drilling patterns by orientation. With a 90 degree cam turn, the lock shifts from locked to unlocked with a quarter turn of the key, which simplifies user training in offices, retail fixtures, or shop installations where multiple people operate the hardware. In lipped or overlay construction, the 1-1/2 inch straight cam spans from the cylinder to the catch point on the cabinet, so the straight throw can engage a strike or frame edge on overlay doors. For flush construction, the 1-1/8 inch extension and 11/32 inch offset cam reaches past the door thickness and steps to meet the frame, which lets the cam sit properly behind a flush front without binding. The spur washer with eyelet sits against the panel; once it is screwed into place it bites into the surface to prevent the lock body from rotating, so the keyed face stays square and the cam consistently lines up with its strike point.

Keying, Cylinder Design, And Service Efficiency

This cam lock uses a C413A keyed alike setup, so multiple locks built to this keying can be operated by the same key, which reduces the number of key changes a facility worker carries. The revolutionary cylinder and cylinder extender design allows cylinders to be easily swapped between different size cam lock bodies, which lets shops support various door thicknesses or cabinet types while keeping a consistent keying system. Because keys are not required for assembly, installers can mount and secure the lock at the shop stage while the keying is handled separately, which keeps fabrication moving even when keys are assigned to another team. Key removable in both locked and unlocked positions provides flexibility during use, allowing the operator to remove the key after securing or opening a cabinet, which helps when servicing a series of locks on a route. Custom keying orders typically ship direct from the manufacturer in 48-72 hours, which gives project planners a predictable window when coordinating key control for larger installations or master-keyed layouts.

Common Questions About The Olympus Cam Lock

Select This Cam Lock For Coordinated Cabinet Jobs

The Olympus disc tumbler cam lock with 15/16 inch cylinder keyed alike C413A and matte black finish ties drawers and doors into a single keyed system, which supports organized access control. Its ANSI/BHMA Grade 2 cycle test performance and 90 degree cam turn provide proven function for repeated use. Support for drawers, right-hand and left-hand doors, plus lipped, overlay, and flush constructions means one model can cover varied cabinet layouts. For projects that rely on standardized keying and flexible cam body sizing, this Olympus Lock, Inc. cam lock offers a focused solution that aligns field installation with planned key control.