Olympus Disc Tumbler Cam Lock For Drawers And Doors

Olympus disc tumbler cam lock provides a cam-style locking point that secures drawers and right-hand or left-hand doors, giving a single product for multiple cabinet orientations. The 15/16 inch cylinder length supports applications where the combined thickness of front and frame does not exceed that length, which helps match the lock body to typical cabinet construction. The lock is keyed alike on the C415A key system, allowing multiple locks on the same key, which simplifies access control in shops or multi-door runs. The lock has a matte black finish designated as 954-US19-C415A, which helps it blend with dark cabinet and fixture hardware in visible installations. The product is identified as a cam lock in the locks and latches category, so it functions as a rotating cam mechanism behind the panel to hold doors or drawers closed once turned.

Cam Lock Details That Support Daily Use

• The lock comes assembled with the cylinder and body joined via a patented retainer staple, which reduces assembly steps at the bench and speeds installation when multiple locks are being fitted.
• The patented retainer staple connection allows cylinders to be swapped between different size cam lock bodies, increasing inventory flexibility because a single cylinder system can serve several body lengths.
• The lock has passed the ANSI/BHMA Grade 2 cycle test at 20,000 cycles including key insertion and removal, which demonstrates performance over repeated daily locking and unlocking in typical cabinet or fixture duty.
• The design uses a revolutionary cylinder plus cylinder extender, allowing cylinders to move between different size cam lock bodies, which supports standardized keying while adapting to varying panel thickness requirements on separate projects.
• The cam turns 90 degrees, providing a clear quarter-turn motion from locked to unlocked, which helps installers orient cams consistently for reliable engagement with strikes or cabinet frames.
• The product uses a spur washer with eyelet that, when screwed into place, prevents lock rotation and keeps the fixing nut from loosening after installation, supporting long-term alignment of the cam with the strike point.

Installation And Application Fit For This Cam Lock

This Olympus disc tumbler cam lock is specified for drawers and right-hand or left-hand doors, which allows one lock type across several cabinet layouts. The product works in lipped or overlay construction using a 1-1/2 inch straight cam, matching face-frame or overlay fronts where the cam must reach behind the lip. For flush construction, it uses a 1-1/8 inch extension cam with an 11/32 inch offset, giving clearance behind flat fronts where the cam must travel back to meet a strike surface. For overlay applications, the combined thickness of front and frame cannot exceed the listed cylinder length, which helps avoid overextending threads and supports proper nut engagement. The cylinder and body arrive assembled, so installation focuses on mounting hole prep, securing the spur washer, and tightening the fixing nut for stable cam rotation.

Using This Olympus Cam Lock In Real Projects

Where This Cam Lock Works In Cabinet Builds

This Olympus disc tumbler cam lock is intended for drawers and right-hand or left-hand doors, so it fits casework such as storage cabinets, display fixtures, or workstations where front access needs to be controlled. In lipped or overlay construction, the 1-1/2 inch straight cam reaches past the front to engage the cabinet frame or strike, which is useful where a face frame projects beyond the door edge. For flush construction, the 1-1/8 inch extension cam with 11/32 inch offset positions the cam behind a flat front, allowing the cam to swing into a behind-the-panel catch point without binding. The product is categorized as a cam lock, meaning the rotating cam on the rear side of the cylinder acts as the mechanical stop, so fixture design can center around a simple strike plate or frame edge for engagement.

Details That Support Consistent Locking Performance

The Olympous disc tumbler cam lock has passed ANSI/BHMA Grade 2 testing at 20,000 cycles including key insertion and removal, which indicates that the cylinder and key interface are built to handle frequent use in typical commercial or shop environments. The key is removable in both locked and unlocked positions, providing flexibility where users may want to operate the lock and then remove the key without changing the current state, which can streamline shared-access workflows. The lock uses a spur washer with eyelet that, when screwed into place, prevents rotation of the housing and resists the fixing nut loosening over time, which keeps the cam aligned with the strike and reduces callbacks caused by shifting hardware. The cylinder and body are assembled using a patented retainer staple, so the connection remains secure while still allowing the cylinder to move between different size cam lock bodies when using the revolutionary cylinder and cylinder extender system, which keeps keying consistent across varied cabinet thicknesses. Custom keying typically ships direct from the manufacturer in 48-72 hours, which supports projects that require specific key codes or keyed-alike groups on tighter timelines.

Common Questions About The Olympus 954-US19-C415A Lock

Selecting This Cam Lock For Your Next Cabinet Run

The Olympus disc tumbler cam lock, part number 954-US19-C415A, combines a 15/16 inch cylinder, 90 degree cam turn, and Grade 2-tested performance to handle regular drawer and door use. The matte black finish ties into dark hardware schemes, which suits visible commercial or residential casework. With support for lipped or overlay construction and flush construction via designated cams, the same core lock can serve different cabinet styles across a project. The keyed alike C415A system and revolutionary cylinder plus extender design simplify keying strategy when multiple cabinets need coordinated access. For projects needing custom keying, typical shipment direct from the manufacturer in 48-72 hours aligns with job schedules that call for specific key codes.