Olympus Disc Tumbler Cam Lock, 1-3/16" Cylinder Keyed Alike C413A Bright Nickel 953-14A-C413A

Olympus Disc Tumbler Cam Lock For Drawers And Doors

Olympus disc tumbler cam lock is a cam lock from Olympus Lock, Inc. with a 1-3/16 inch cylinder keyed alike to key code C413A, so multiple locks can be operated with the same key where common access is needed. The lock has a bright nickel finish, which presents a clean, professional appearance on visible drawer and cabinet door fronts in woodworking and casework projects. This cam lock is in the Locks and Latches category under Cam Locks, so it fits directly into standard cam lock roles on cabinets and fixtures. The lock uses a 90 degree cam turn, giving a simple quarter-turn action from open to closed that speeds up day-to-day access. The product is identified as manufacturer part number 953-14A-C413A, which ties directly to ordering and replacement.

Cam Lock Details That Support Everyday Use

• The lock is shipped with the cylinder and body assembled via a patented retainer staple, so installers receive a lock body that is already put together, saving assembly time during cabinet or fixture builds.
• The product has passed the ANSI/BHMA Grade 2 cycle test for 20,000 cycles including key insertion and removal, so it is rated to handle repeated locking and unlocking in higher-use environments where the lock is operated frequently.
• The key is removable in both locked and unlocked positions, which lets users take the key away after locking or leave the cylinder without a key during normal open access, supporting different access control routines at the job site.
• The lock uses a disc tumbler mechanism with cam action, so it provides positive rotary engagement of the cam with the cabinet or drawer strike, helping hold doors or drawers closed when the cam is turned to the locked position.
• Custom keying typically ships direct from the manufacturer in 48-72 hours, giving projects a way to obtain specific keying arrangements on a tight timetable when keyed-alike or keyed-different systems are required.

Installation And Fit For Overlay And Flush Work

The cam lock is designed for drawers and both right-hand and left-hand doors, so it can be used across a variety of cabinet layouts without needing separate lock models for each handing. For lipped or overlay construction, it uses a 1-1/2 inch straight cam, giving extended reach past the front to grab the frame or strike in face-frame or overlay door situations. For flush construction, it uses a 1-1/8 inch extension, 11/32 inch offset cam, so the cam steps back to meet a flush frame or strike without binding. For overlay applications, the combined thickness of the front and frame cannot exceed the cylinder length listed, which defines how thick the material stack can be while still allowing the cylinder to operate and the cam to engage properly.

How This Olympus Cam Lock Works In Practice

Cam Lock Use On Drawers And Cabinet Doors

The Olympus disc tumbler cam lock is specified for drawers and for right-hand or left-hand doors, so the same lock model can be stocked for multiple cabinet positions across a job. In drawer applications, the 90 degree cam turn swings the cam behind a strike or frame member, securing the drawer front in one quick quarter-turn motion. On overlay cabinet doors using the 1-1/2 inch straight cam, the cam reaches behind the door edge to catch the frame, helping keep the door closed against pulling forces. On flush construction, the 1-1/8 inch extension, 11/32 inch offset cam steps the cam face closer to the frame, helping align with a strike on a flush door or panel without changing hardware locations. The bright nickel finish allows the lock face to present a consistent look across multiple doors and drawers in reception desks, casework runs, or storage cabinets.

Details That Support Keying Flexibility And Stability

The lock is built with a revolutionary cylinder plus cylinder extender that allows cylinders to be swapped between different size cam lock bodies, which lets shops adapt one keyed system to multiple body lengths or locations while using the same key code. The C413A keyed alike configuration means that locks ordered under this part number operate with the same key pattern, supporting master or shared access schemes in offices, schools, or shop storage areas. The lock is shipped with the cylinder and body assembled via a patented retainer staple, so installers do not need to bench-assemble body and cylinder, reducing the risk of assembly errors. A spur washer with eyelet is specified; when it is screwed into place, the spur washer prevents lock rotation and keeps the fixing nut from loosening after installation, which helps the cylinder stay aligned in wood or panel material during repeated use. The ANSI/BHMA Grade 2 cycle test rating of 20,000 cycles, including key insertion and removal, indicates the lock has been evaluated for repeated operation, supporting use where staff are in and out of locked compartments throughout the day.

Common Questions About This Olympus Cam Lock

Selecting This Cam Lock For Your Next Project

The Olympus disc tumbler cam lock with 1-3/16 inch cylinder and key code C413A ties cam action, keyed-alike convenience, and ANSI/BHMA Grade 2 cycle performance into one part number for drawers and cabinet doors. The choice of 1-1/2 inch straight cam for lipped or overlay construction and 1-1/8 inch extension, 11/32 inch offset cam for flush construction lets this lock address different cabinet build styles while maintaining the same face appearance and key system. The bright nickel finish suits visible casework and furniture-grade installations where hardware appearance matters alongside function. When a project calls for a cam lock that supports both flexible keying through the cylinder and extender design and a defined material thickness range for overlay applications, this Olympus model offers those capabilities under one consistent part number.