Olympus Disc Tumbler Cam Lock For Cabinets

Olympus disc tumbler cam lock gives you a keyed alike cam lock solution for drawer and door applications, so multiple lock points can be operated with the same key on the job. The 1-3/16 inch cylinder provides capacity for applications where the combined thickness of front and frame matches this cylinder length, which keeps drilling layout predictable. The bright nickel finish ties into typical cabinet and fixture hardware, maintaining a consistent look across visible lock faces. As a cam lock in the Locks and Latches category, it serves as the primary security point for drawers and for right-hand or left-hand doors, simplifying hardware selection across a run of cabinets. The lock uses a 90 degree cam turn, which provides a short, positive throw that is easy to align with strikes or frames during layout.

Key Cam Lock Details That Support Install Work

• The lock is keyed alike to key code C415A, so multiple locks can be set up to operate with the same key across a project, which simplifies key management for end users.
• The cylinder and body are assembled via a patented retainer staple, so the core and housing arrive together as a unit, which speeds installation on site because components stay aligned.
• The cam lock passed the ANSI/BHMA Grade 2 cycle test at 20,000 cycles with key insertion and removal, indicating it is designed to handle repeated daily use in typical cabinet and furniture environments.
• The design uses a revolutionary cylinder plus cylinder extender, allowing cylinders to be swapped between different size cam lock bodies, which supports inventory flexibility and job-specific cylinder length selection.
• A spur washer with eyelet, when screwed into place, prevents lock rotation and keeps the fixing nut from loosening after installation, which helps the lock stay oriented correctly in service.

Cam Lock Fit, Cylinder Length, And Construction Styles

The 1-3/16 inch cylinder length establishes the maximum combined thickness of front and frame for overlay applications, so installers can match door or drawer fronts to the cylinder depth during layout. For overlay construction, the lock works with a 1-1/2 inch straight cam, which offers a simple throw path for engaging cabinet frames. For flush construction, the lock works with a 1-1/8 inch extension cam with an 11/32 inch offset, so the cam can reach behind the front while clearing the edge profile. The lock is suitable for drawers and for right-hand or left-hand doors, which lets one cam lock style handle different swing directions without changing hardware families.

Using This Cam Lock In Drawer And Door Projects

Cam Lock Applications On Drawers And Doors

This Olympus disc tumbler cam lock is intended for drawers and doors where a compact 90 degree cam action suits the cabinet layout. On drawers, the 1-3/16 inch cylinder length supports fronts and frames whose total thickness does not exceed that length, which helps keep the cylinder face flush while giving the cam enough reach to grab internal framing. On right-hand or left-hand doors, the lock allows a single product type to cover both swing directions, so casework runs can be secured without changing SKUs between openings. For lipped or overlay construction, the 1-1/2 inch straight cam bridges from the lock body to the cabinet frame, which is useful when the door overlays the case. For flush construction, the 1-1/8 inch extension cam with 11/32 inch offset positions the cam behind the door plane, which helps it clear the edge while still engaging the frame.

Details That Support Repeatable Cam Lock Results

The 90 degree cam turn offers a predictable quarter-turn motion, which makes it easier to align the cam with strikes or cabinet edges during layout and reduces trial-and-error during installation. The spur washer with eyelet, when screwed into the substrate, bites into the mounting surface to resist lock rotation, which keeps the keyway vertical and prevents the fixing nut from backing off under use. The cylinder and body being assembled via a patented retainer staple means the cylinder remains seated in the housing as a single unit, which helps maintain consistent key alignment from lock to lock. The revolutionary cylinder plus cylinder extender system allows cylinders to be swapped between different size cam lock bodies, which lets hardware planners use a common key platform while adjusting body depth to suit different cabinet constructions. Custom keying that typically ships direct from the manufacturer in 48 to 72 hours supports projects that need a specific keying schedule on a defined timeline.

Common Questions About Olympus Bright Nickel Cam Lock

Select This Olympus Cam Lock For Targeted Use

The Olympus disc tumbler cam lock with 1-3/16 inch cylinder, keyed alike to C415A, bright nickel finish, and 90 degree cam turn offers a focused solution for drawers and doors. Lipped, overlay, and flush construction options with specified cams give casework designers defined choices for how the cam engages frames. The ANSI/BHMA Grade 2 cycle performance and the patented retainer staple assembly add confidence when planning hardware for busy environments. Custom keying availability within about 48 to 72 hours from the manufacturer supports projects that need a coordinated keying plan on a reliable schedule.