Sliding Door Track Assembly No. 14, 3' Length Oil Rubbed Bronze
Description
Sliding Door Track Assembly No. 14 For Glass
Sliding Door Track Assembly No. 14 gives you a matched aluminum track system for 1/4 inch thick glass doors, so small and light sliding doors move on a layout designed around that glass thickness. The 3 ft long aluminum track suits shorter cabinet or case openings where a compact sliding run is needed. The oil rubbed bronze finish provides a dark, uniform appearance that coordinates with similar bronze-toned hardware in the same project. The track assembly is recommended for small and/or light doors, which supports smoother travel and reduces strain on the rollers and guides in this size range. The EPCO No. 14-ORB-3 designation ties this assembly to a specific, repeatable part number, helping you match existing hardware or standardize recurring builds. By centering on 1/4 inch glass and modest door sizes, this track assembly focuses on typical cabinet and showcase sliding applications.
Key Track Assembly Details For Glass Doors
- Design for 1/4 inch thick glass doors means the components work around that glass size, which helps you plan door panels and grooves to match the hardware interface on new or repeat jobs.
- Recommendation for small and/or light doors keeps the hardware operating in its intended load range, which supports consistent sliding action on cabinets, display cases, or light interior partitions.
- Aluminum 3 ft long track provides a fixed run length to design around, which simplifies layout for shorter openings and reduces cutting on standard cabinet or showcase widths.
- Oil rubbed bronze finish gives the visible metal a dark, muted look, which helps the track blend with bronze or dark-toned pulls and hinges in coordinated hardware schemes.
- Brand identification as EPCO with part number 14-ORB-3 gives you a defined product line, which aids in reordering the same system or matching it across multiple openings.
Installation Considerations For Track And Guides
The aluminum 3 ft long track focuses installation on a straight, manageable section, so you can align the run accurately along shorter cabinet or case openings. Design for 1/4 inch thick glass doors means the glazing vinyl and related contact points suit that thickness, which supports stable seating of the glass in the sliding system. Recommendation for small and/or light doors keeps the installed doors within a range the steel rollers and clip guides can handle smoothly. The oil rubbed bronze finish on visible components maintains a consistent appearance along the installed edge, which matters when the track is exposed at the front of cabinetry or displays. With EPCO No. 14-ORB-3 as a defined assembly, installers can repeat installation steps across multiple units using the same geometry.
How This EPCO Track Works In Projects
Where Sliding Door Track Assembly No. 14 Fits Best
The Sliding Door Track Assembly No. 14 is described for 1/4 inch thick glass doors, so it targets applications using that glass size such as small display fronts or cabinet doors. Its recommendation for small and/or light doors aligns with shorter spans and modest panel heights, which fits common 3 ft and under cabinet or showcase openings. The aluminum 3 ft long track length serves well in single-bay runs or side-by-side cabinets that repeat that width, keeping each opening on a known standard. The oil rubbed bronze finish suits interiors where darker metal is preferred, so the visible edge of the track and guides coordinates with other oil rubbed bronze sliding door hardware. With EPCO branding and the 14-ORB-3 identifier, this assembly fits into sliding door hardware selections where a specific manufacturer line is already in use.
Details That Support Smooth Sliding Performance
Design for 1/4 inch thick glass doors connects directly to stable guidance, because the glazing vinyl and shoes are described around that thickness so the glass seats firmly. Recommendation for small and/or light doors keeps weight closer to what the steel rollers and clip guides are described to carry, supporting easier door movement under typical hand force. The aluminum 3 ft long track length keeps the number of contact points to a practical minimum on short runs, which can help reduce friction and simplify alignment along the opening. The oil rubbed bronze finish gives the sliding edge a consistently dark tone, which helps the hardware visually recede so attention stays on the glass and frame. Having a defined EPCO No. 14-ORB-3 assembly groups rollers, guides, and track geometry into a single matched system, simplifying selection when uniform sliding action is desired across multiple door sets.
Installer Questions On EPCO No. 14 Sliding Track
What door material and thickness does this track assembly serve?
Sliding Door Track Assembly No. 14 is described for 1/4 inch thick glass doors, so it focuses on glass panels using that thickness in small or light sliding applications.
How does the 3 ft aluminum track length affect layout?
The aluminum 3 ft long track gives a fixed run length that suits shorter openings, which simplifies cabinet or showcase layouts built around a 3 ft sliding span.
Why is this EPCO assembly recommended for small or light doors?
The assembly is recommended for small and/or light doors so door size and weight align with the described steel rollers and clip guides, supporting smoother sliding performance.
What does the oil rubbed bronze finish contribute in use?
The oil rubbed bronze finish provides a darker, muted appearance on visible hardware, which helps coordinate sliding components with other oil rubbed bronze fittings on the project.
How does using part number 14-ORB-3 help future projects?
EPCO part number 14-ORB-3 ties this assembly to a consistent configuration, aiding repeat ordering and matching across multiple cabinets or display openings.
What role does the glazing vinyl play with 1/4 inch glass?
The glazing vinyl is described for 1/4 inch glass, so it helps seat that glass thickness within the sliding system, supporting stable contact between glass and hardware.
Choose This Track Assembly For 1/4 Inch Glass
Sliding Door Track Assembly No. 14, 3 ft Length Oil Rubbed Bronze offers an EPCO aluminum track system built around 1/4 inch thick glass doors and small or light door sizes. When a 3 ft span, darker finish, and defined No. 14-ORB-3 configuration match your cabinet or display layout, this assembly gives you a focused option tied to a specific sliding door hardware class from Wurth Baer Supply.