Sliding Door Track Assembly No. 14, 4' Length Oil Rubbed Bronze
Description
Sliding Door Track Assembly No. 14 For Light Glass Doors
Sliding Door Track Assembly No. 14 is an EPCO aluminum sliding door hardware set designed for 1/4 inch thick glass doors, so it suits jobs using standard light glass panels in cabinets or similar applications. The 4 ft long aluminum track length supports openings that match this span, helping you cover typical smaller sliding door runs without field-splicing sections. The assembly is recommended for small and/or light doors, so it targets installations where door weight stays modest and operation needs to remain smooth. The oil rubbed bronze finish presents a darker, more traditional hardware appearance, aligning with designs that call for a warm, low-sheen look around glass. The EPCO brand and 14-ORB-4 part number give a clear, repeatable reference when matching this sliding door track assembly across drawings, estimates, and reorders.
Key Sliding Door Assembly Details For Glass Work
- The assembly is designed for 1/4 inch thick glass doors, so glass sizing and channel engagement are based on this thickness for a predictable sliding fit.
- The 4 ft long aluminum track provides a defined span for small or light sliding doors, which supports layouts where the opening width stays within that run.
- The assembly is recommended for small and/or light doors, aligning the hardware components with lighter glass panels for smoother everyday movement.
- The oil rubbed bronze finish on the assembly delivers a darker tone on visible hardware, supporting projects that call for that specific color match.
- The EPCO Sliding Door Track Assembly No. 14 uses part number 14-ORB-4, giving installers and buyers a consistent identifier for specifications and replacements.
Installation-Oriented Sliding Door Track Design Details
This aluminum sliding door track assembly uses a 4 ft long format, which shapes how openings are laid out and simplifies planning around a single-piece track. The system is configured for 1/4 inch thick glass doors, so glass fabrication and edge preparation follow that thickness to meet the track and shoe interface. The recommendation for small and/or light doors aligns the assembly with installations where modest panel weight helps the rollers and guides work smoothly. The oil rubbed bronze finish carries through the visible hardware, influencing how the installed track assembly aligns with surrounding door frames, casework, or trim colors.
How This EPCO Track Assembly Works In Practice
Sliding Door Track Assembly No. 14 In Typical Use
The EPCO Sliding Door Track Assembly No. 14 is built as a sliding door hardware solution for 1/4 inch thick glass doors, so its components are dimensioned around that glass size for engagement and travel. The 4 ft long aluminum track length fits projects where the clear opening or cabinet run is planned around that span, so the hardware serves shorter, small-door applications. Because the assembly is recommended for small and/or light doors, it fits installations using lighter glass panels, such as modest cabinet doors or similar openings, where heavy architectural doors are not required. The oil rubbed bronze finish sets the visual presence of the assembly, allowing it to coordinate with other oil rubbed bronze elements on nearby hinges, pulls, or decorative hardware. The sliding door hardware falls under builders hardware and sliding door hardware classifications, situating this product within broader hardware schedules for woodworking and interior projects.
Details That Support Smooth, Repeatable Sliding Action
The aluminum 4 ft long track provides a straight, consistent running surface for the doors, which supports smoother travel on small and/or light doors over that length. The assembly is specified for 1/4 inch thick glass doors, so the glass-to-track relationship, roller positioning, and guides are all tuned to that specific thickness, helping keep the doors aligned in the sliding path. The oil rubbed bronze finish on this sliding door hardware defines the surface treatment on visible elements, which matters when coordinating appearance with other hardware in the same space. Under the EPCO brand and manufacturer part number 14-ORB-4, the Sliding Door Track Assembly No. 14 offers a defined configuration, so matching hardware across multiple openings follows a single, repeatable reference. Alignment between the sliding door hardware category and the small, light glass door recommendation supports use where modest loads and smooth movement are priorities.
Common Questions About This Sliding Door Track Assembly
What glass thickness does this sliding door track assembly support?
Sliding Door Track Assembly No. 14 is designed for 1/4 inch thick glass doors, so glass selection and edge sizing follow that thickness for proper fit in the system.
How long is the EPCO Sliding Door Track Assembly No. 14?
The EPCO Sliding Door Track Assembly No. 14 uses a 4 ft long aluminum track, so it fits openings laid out around that span for small or light glass doors.
For what type of doors is this sliding track assembly recommended?
The assembly is recommended for small and/or light doors, aligning the hardware with lighter 1/4 inch thick glass panels in appropriate applications.
What is the finish on this 4 ft sliding door track?
The 4 ft sliding door track assembly has an oil rubbed bronze finish, affecting the visible color of the hardware where it meets surrounding cabinetry or trim.
Who manufactures the Sliding Door Track Assembly No. 14?
The Sliding Door Track Assembly No. 14 is produced by EPCO, so the brand and 14-ORB-4 part number provide a consistent reference for selection.
How does the 4 ft length affect layout for small glass doors?
The 4 ft length defines the maximum sliding run for this assembly, guiding opening widths and door sizing for small or light 1/4 inch glass doors.
Selecting This Track For 1/4 Inch Glass Doors
EPCO Sliding Door Track Assembly No. 14 in oil rubbed bronze gives a defined 4 ft aluminum track solution for 1/4 inch thick glass doors where small and/or light panels are planned. Using the 14-ORB-4 designation keeps specifications, ordering, and repeat projects aligned around the same sliding door hardware configuration.