1/4" x 48" Glass Door Assembly, Satin Clear Anodized Finish

1/4 x 48 Glass Door Assembly For Sliding Runs

1/4 x 48 glass door assembly from EPCO is a satin clear anodized aluminum hardware set designed for lightweight two glass door installations, so it gives cabinet or casework openings a smooth sliding glass solution using 1/4 inch glass panels. The 48 inch hardware length suits medium-width openings and can be easily cut to fit any width opening, which lets you adapt a single set across different case sizes on the same job. Hardware is made of aluminum with a satin clear anodized aluminum finish, so the members stay corrosion-free in typical interior environments where moisture or cleaning products are present. Plastic guides are designed to fit into the top of 1/4 inch glass, which stabilizes the glass at the top edge and helps the doors track consistently. Sets are designed for two glass door applications, so this configuration supports overlapping glass panels where both doors need to slide.

Key Sliding Glass Hardware Details That Matter

• Hardware is made of aluminum with a satin clear anodized aluminum finish, so the members resist corrosion over time and maintain a consistent appearance along the door opening in everyday use.
• Corrosion-free anodized aluminum members are ideal for lightweight 1/4 inch thick two glass door installations, so you get stable support for glass without adding unnecessary weight to the cabinet or display structure.
• Hardware sets are designed with all set components in four lengths: 36, 48, 60 and 72 inches, which gives flexibility to match typical cabinet and case sizes across multiple installations.
• Easily cut to fit any width opening, so the 48 inch members can be trimmed on site to suit custom casework widths while keeping the sliding system aligned along the full span.
• Plastic guides are designed to fit into the top of 1/4 inch glass, so the glass edges are captured at the top and slide more predictably with reduced side-to-side movement.

Installation Details For 1/4 Inch Glass Fit

Hardware sets are designed for two glass door applications using 1/4 inch thick glass, so the guide and track geometry is tailored to that glass thickness for a consistent running fit. Glass should be cut 1-7/32 inches shorter than height of opening, which creates the working clearance needed for the upper guide, plastic guides, and lower track to capture the glass without binding. Plastic guides are designed to fit into the top of 1/4 inch glass, so they seat in a prepared edge and hold the glass in the upper guide channel during movement. Corrosion-free anodized aluminum members carry the glass along the span, so once the opening height and glass length follow the 1-7/32 inch dimension, the doors sit correctly between upper guide and lower track.

Using This EPCO Glass Door Assembly On Projects

Where This Aluminum Glass Track Works Best

GLASS ASSEMBLY, ALUMINUM in the 48 inch length fits builders hardware and sliding door hardware applications where two lightweight 1/4 inch glass doors are needed across a medium-width opening. Sets are designed for two glass door applications, so they suit cabinets, display cases, or similar runs where both doors must slide past each other. Hardware sets are designed with all set components in four lengths: 36, 48, 60 and 72 inches, so this 48 inch version lines up with common cabinet spans while longer or shorter sizes cover other openings on the same project. Hardware is made of aluminum with a satin clear anodized aluminum finish, so in commercial or shop environments the visible track and guide members align with other anodized trim.

Corrosion-free anodized aluminum members are ideal for lightweight 1/4 inch thick two glass door installations, so they carry the glass without warping or swelling, helping the rollers and guides stay in plane over time. Plastic guides are designed to fit into the top of 1/4 inch glass, so the upper edges are supported as the doors move, which helps keep the lower track engagement even. Glass should be cut 1-7/32 inches shorter than height of opening, so once the opening is framed and the aluminum members are positioned, the 1/4 inch glass panels drop into a predictable gap between upper guide and lower track. The 48 inch length can be easily cut to fit any width opening, so a single part number can be stocked and then trimmed for varied casework widths while retaining the EPCO geometry and running characteristics.

Common Questions About This EPCO Glass Assembly

Select This 48 Inch EPCO Set For 1/4 Inch Runs

The EPCO 1/4 x 48 glass door assembly uses corrosion-free anodized aluminum members tailored to lightweight 1/4 inch thick two glass door installations, so it gives sliding glass runs a consistent track and guide system. Hardware sets are designed with all set components in four lengths, and this 48 inch version can be easily cut to fit any width opening, so a single set adapts across cabinets, cases, and other openings sized around 4 feet. For projects calling for satin clear anodized aluminum sliding glass hardware where glass should be cut 1-7/32 inches shorter than height of opening, this EPCO glass assembly provides a matched upper guide, plastic guide, shoe, roller, and lower track system built for 1/4 inch glass.