1/4" x 60" Glass Door Assembly, Satin Clear Anodized Finish

Glass Door Assembly 1/4 Inch For Two Panels

Glass door assembly 1/4 inch from EPCO is a 60 inch aluminum hardware set designed for two glass door applications, so it gives a ready-made track and guide solution for lightweight 1/4 inch thick glass. The hardware is made of aluminum with a satin clear anodized aluminum finish, which provides corrosion-free anodized aluminum members for long-term use in typical indoor environments. The set is designed specifically for lightweight 1/4 inch thick two glass door installations, so the components work together as a matched system. Plastic guides are designed to fit into the top of 1/4 inch glass, which stabilizes the glass panels inside the track. Hardware sets are designed with all set components in four lengths, and this 60 inch option suits wider openings where a continuous track is preferred.

Sliding Glass Assembly Details That Support Workflow

• Hardware is made of aluminum with a satin clear anodized aluminum finish, which provides corrosion-free anodized aluminum members that handle everyday sliding motion without surface rust in normal conditions.
• Sets are designed for two glass door applications, so the upper guide, shoes, rollers, and lower track are coordinated to carry a pair of sliding glass panels on a single opening.
• Plastic guides are designed to fit into the top of 1/4 inch glass, which holds the glass edge securely and helps it run smoothly in the upper guide channel during opening and closing.
• Hardware sets are designed with all set components in four lengths: 36, 48, 60 and 72 inches, giving layout flexibility so track length can match small to large opening widths.
• Glass should be cut 1-7/32 inches shorter than height of opening, which creates the working clearance needed between the upper guide and lower track for smooth panel movement.
• Hardware is easily cut to fit any width opening, so the 60 inch members can be trimmed on site for custom-sized cabinet or casework runs.

Installation And Fit For 1/4 Inch Glass Doors

The hardware set is designed for lightweight 1/4 inch thick two glass door installations, so correct glass thickness is central to fit and operation. Plastic guides are designed to fit into the top of 1/4 inch glass, which means the glass edge nests into the guide components without extra machining. Glass should be cut 1-7/32 inches shorter than height of opening, providing the vertical gap needed between the upper guide and lower track so the panels slide freely. Hardware is easily cut to fit any width opening, allowing the 60 inch aluminum members to be trimmed to match the exact clear opening dimension during installation.

Using This EPCO Glass Assembly In Projects

Where This Aluminum Glass Door Assembly Fits Best

This EPCO glass door assembly, aluminum with satin clear anodized finish, sits in the Builders Hardware and Sliding Door Hardware class, so it suits cabinet, display, or similar sliding door work. Sets are designed for two glass door applications, so this 60 inch configuration supports a pair of overlapping panels in one opening. The hardware is made of aluminum with a satin clear anodized aluminum finish, which keeps the exposed track and members visually consistent with other anodized aluminum components. Corrosion-free anodized aluminum members are ideal for lightweight 1/4 inch thick two glass door installations, giving a stable track system for everyday sliding access to the opening.

Details That Help Repeatable Sliding Door Results

The hardware set is built around 1/4 inch thick glass, and plastic guides are designed to fit into the top of 1/4 inch glass, so panel edges seat accurately into the upper components and maintain alignment during movement. Glass should be cut 1-7/32 inches shorter than height of opening, which establishes a repeatable dimension installers can use across multiple openings to get consistent clearance. Hardware is easily cut to fit any width opening, because the aluminum members can be trimmed from the 60 inch length to match different cabinet or casework sizes using standard cutting methods. Hardware sets are designed with all set components in four lengths, so projects with varying spans can use the same EPCO system while scaling track length as needed.

Common Questions About EPCO 60 Inch Glass Assembly

Select This Glass Door Assembly For 1/4 Inch Runs

This EPCO glass door assembly 1/4 inch, aluminum with satin clear anodized finish, offers a 60 inch track solution specifically for lightweight two glass door applications. With plastic guides designed to fit into the top of 1/4 inch glass and glass cut 1-7/32 inches shorter than the opening height, the system lines up around known dimensions. The hardware is easily cut to fit any width opening, so the same set can match varied cabinet or display widths. For projects built around 1/4 inch glass panels, this sliding door hardware set provides a coordinated anodized aluminum track layout.