L-Channel Aluminum 1 inch moulding from EPCO is an extruded aluminum profile designed as moulding for mirror and glass clip applications, so it gives installers a straightforward way to support and edge mirror or glass panels. The 1 inch height establishes a consistent reference for aligning panels along walls or casework, which helps keep long runs straight on layout-intensive jobs. The 12 foot length reduces the number of joints along an edge, which limits visual breaks and simplifies measuring and cutting for larger spans. The oil rubbed bronze finish provides a dark, uniform appearance around the glass edge, which helps the moulding blend into darker interiors where exposed metal would stand out. As part of EPCO mirror and glass clip solutions, this L-channel works as the continuous trim element in a fastening system, tying clips and panels into a clean, finished edge detail.
This EPCO L-channel uses its 12 foot extruded aluminum length to streamline installation on long edges, since a single piece can run across much of a wall or case opening. The 1 inch moulding height serves as the primary reference for setting panel position along the edge, so installers can base their layout on a defined, repeatable dimension. Because the profile is extruded aluminum, cuts remain consistent from piece to piece, which supports tight, square ends when trimming to fit field conditions. The oil rubbed bronze finish on the channel provides its visual boundary around the mirror or glass, so once cut to length and fastened, the moulding creates a continuous, bronze-toned frame line that aligns with other EPCO mirror and glass clip components.
This EPCO L-channel is identified as part of the Mirror & Glass Clips product class, so it is suited to mirror and glass edge applications where a continuous moulding is needed. The 1 inch height gives enough profile to register against the panel edge while still reading as trim, which helps when mirrors are set over finished surfaces and need a defined boundary. Its extruded aluminum construction supports use in woodworking and interior finish environments where metal trim is regularly cut and fitted alongside wood parts. The oil rubbed bronze finish ties this channel into darker design schemes, so it works in rooms that already use bronze-toned fasteners and trims from EPCO. With a 12 foot length, the moulding can span substantial sections of wall, which is practical for commercial or residential mirror runs that exceed typical vanity widths.
The 12 foot extruded aluminum length provides a long, straight reference line, which helps keep mirrors and glass panels aligned without frequent joints that can telegraph misalignment. Because the profile is consistent across its length, installers can cut multiple pieces from identical stock, which supports symmetrical layouts on opposite walls or cabinetry. The 1 inch moulding height gives a predictable edge dimension that simplifies repeated measurements, reducing layout variation from panel to panel. The oil rubbed bronze finish supplies a coordinated visual edge, so once installed, the channel reads as a continuous bronze trim rather than a series of separate components. The EPCO 2040-ORB part number ties these characteristics to a single, traceable item, which supports repeat orders when additional rooms or matching projects are scheduled later.
The EPCO L-channel moulding is 12 feet long, which lets installers span long mirror or glass edges with fewer joints and simplifies layout for wide walls or larger openings.
The EPCO aluminum L-channel has a 1 inch moulding height, providing a consistent trim dimension that helps align mirror or glass edges across multiple panels on a project.
The L-channel is made from extruded aluminum, giving a uniform profile that cuts cleanly and supports accurate, repeatable fits at corners and terminations.
The EPCO 2040-ORB L-channel has an oil rubbed bronze finish, creating a dark, even edge that coordinates with other bronze-toned mirror and glass clip components.
The 12 foot length allows longer continuous runs along mirror edges, reducing the number of joints and supporting straighter, cleaner visual lines on large installations.
The EPCO 2040-ORB part number identifies this specific 1 inch, 12 foot, oil rubbed bronze extruded aluminum L-channel, which helps match or repeat mirror and glass trim jobs.
The EPCO L-Channel Aluminum 1 inch moulding in a 12 foot length combines extruded aluminum construction with an oil rubbed bronze finish, so it delivers a consistent mirror and glass trim profile that aligns with EPCO Mirror & Glass Clips projects. The defined 1 inch height and long, straight stock support efficient layout, cutting, and fitting across walls or casework. For jobs calling for a continuous bronze-toned edge around mirrors or glass, this 2040-ORB moulding provides a repeatable solution grounded in a specific, traceable part number.
Sold In: 1 Each