Order by 24/7 by web, contact our sales reps or call by phone.
What you need, when you need it, all in one place.
Most orders ship same day.
Advice and support from knowledgeable professionals.
L-Channel 5/8"H, 12'L, Oil Rubbed Bronze describes an EPCO extruded aluminum moulding designed for mirror and glass edge support, so it gives a consistent channel profile along the full length for clean, continuous runs on-site. The 5/8 inch height defines how it captures mirror or glass edges, which helps set layout expectations when planning reveals and clearances around adjacent surfaces. The 12 foot length allows long spans to be handled as a single piece, which reduces joints along runs and helps create straighter visual lines on larger installations. The oil rubbed bronze finish establishes a dark, warm appearance around the glass, letting you coordinate this L-channel with surrounding trim or hardware in the same tone. As part of the Mirror & Glass Clips product class within fasteners, it functions as structural edge support in mirror work rather than decorative trim only.
The 5/8 inch height on this EPCO aluminium moulding defines the leg that runs up the face of the mirror or glass, so it directly affects how much of the edge remains visible when installed. That dimension also guides how far to offset any substrates or trims near the glass, supporting predictable clearances across multiple openings. The 12 foot length provides a planning baseline for cutting pieces to size from a single run, which helps organize cut lists and minimize short offcuts when laying out several smaller mirrors. Because the profile is an extruded aluminum section, each cut piece maintains the same geometry, which makes fit repeatable along the project when several lengths are fabricated from the same stock.
This EPCO L-Channel 5/8"H, 12'L, Oil Rubbed Bronze is positioned in the Mirror & Glass Clips product class, so it is suited to applications where a linear channel supports or edges mirror and glass. The 5/8 inch moulding height works as a reference leg along the glass edge, which helps position the mirror consistently against adjacent walls, panels, or cabinet structures. With its extruded aluminum body, the profile remains consistent from one end of the 12 foot length to the other, so multiple segments cut from the same stick align well when used on opposing sides of a mirror. The oil rubbed bronze finish defines a specific visual tone, letting you deploy this channel in rooms or fixtures that already use oil rubbed bronze elements for a unified appearance.
The 12 foot length gives flexibility when you are working on both wide mirrors and smaller individual pieces within the same project, because long stock can be cut to various dimensions without changing profiles between runs. As part of a mirror and glass focused category, this moulding integrates into assemblies where supporting, edging, or retaining the perimeter of the glass is a core requirement. In practice, the known 5/8 inch height and full-length aluminum extrusion allow you to map out edges, corners, and transitions on drawings, then reproduce that plan consistently on site when you cut and place each piece.
The defined 5/8 inch moulding height offers a fixed reference that carries across every piece cut from this EPCO 2041-ORB moulding, which contributes to straight, aligned reveals when you repeat the same detail around multiple mirrors. Because the material is extruded aluminum, each cut retains the same cross-section, so you can rely on a matching channel geometry when you return to the job for later phases or replacements using the same part number. The 12 foot length simplifies planning for long horizontal runs under or over mirrors, because one stock length can often span an entire width before trimming for side pieces.
The oil rubbed bronze finish on this mirror and glass L-channel sets the surface tone, so when you use the same product across several openings, the edge color and appearance remain consistent from room to room. Being classified under Mirror & Glass Clips within fasteners underscores its role as working hardware in mirror assemblies, which means you can assign it as the standard L-channel in project documentation by its EPCO brand and 2041-ORB identifier. Combining the fixed 5/8 inch height, extruded aluminum construction, and 12 foot length supports repeatable fabrication steps: measure, mark, cut, then align the channel by the same edge reference on every mirror.
The EPCO L-Channel uses a 5/8 inch moulding height, which defines how much of the mirror or glass edge the channel leg covers, guiding edge exposure and clearance planning.
The EPCO 2041-ORB moulding is 12 feet long, allowing long mirror edges or multiple smaller pieces to be cut from one continuous aluminum extrusion.
This L-channel is an extruded aluminum moulding, providing a consistent cross-section along its 12 foot length for uniform mirror or glass edge support.
The oil rubbed bronze finish gives the channel a dark bronze look, helping mirror edges coordinate with other oil rubbed bronze elements in the same space.
This EPCO L-channel is categorized under Mirror & Glass Clips, so it serves as linear hardware for supporting and edging mirror and glass in installations.
The EPCO brand and 2041-ORB part number identify a specific 5/8 inch, 12 foot oil rubbed bronze aluminium L-channel, simplifying reorders or matching on later projects.
The EPCO L-Channel 5/8"H, 12'L, Oil Rubbed Bronze combines a defined 5/8 inch moulding height, 12 foot extruded aluminum length, and oil rubbed bronze finish, giving you a predictable mirror and glass channel to specify by its 2041-ORB identifier. When a project calls for mirror or glass edge support using an aluminum L-profile in an oil rubbed bronze tone, this Mirror & Glass Clips moulding from Wurth Baer Supply offers the fixed dimensions and appearance needed for consistent detailing across related openings.
Sold In: 1 Each